[Openocd-development] [patch] update DM355 EVM support

Update the board config for the DaVinci DM355 EVM so the reset-init event handler does the rest of the work it should do: - minor PLL setup bugfixes - initialize the DDR2 controller - probe both NAND banks - initialize UART0 - enable the icache --- tcl/board/dm355evm.cfg | 87

Re: [Openocd-development] libftdi regression since rev 2573

Nicolas Pitre pisze: I removed the B from ShevaPlug as this does not make sense, eg. the MPSSE cannot be on ChannelB in the FT2232D. If you are saying the line 'ft2232_device_desc SheevaPlug JTAGKey FT2232D B' works then ok i will revert that part. Yes it works with the B back. Go figure

[Openocd-development] Mini6410 donation for OpenOCD

On Thu, Sep 10, 2009 at 04:09:09PM +0200, Nico Coesel wrote: On Tue, Sep 08, 2009 at 08:48:58AM +0200, Øyvind Harboe wrote: Does anyone have an s3c6410 PCB out there they could donate to us? If somebody can suggest a relatively inexpensive 6410 based mass-market product tha thas

Re: [Openocd-development] Mini6410 donation for OpenOCD

ok, thansk for pointing this out.  I'm willing to donate one to the OpenOCD developers.  Please discuss internally who should receive the board and tell me the shipping address in private mail. Zylin is putting together a test farm on behalf of OpenOCD. If any of the other developers have a

Re: [Openocd-development] [patch] Cleanup downloaded ARM target algo code

Committed. Thanks! -- Øyvind Harboe Embedded software and hardware consulting services http://www.zylin.com ___ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development

Re: [Openocd-development] [patch] update DM355 EVM support

Committed. Thanks! -- Øyvind Harboe Embedded software and hardware consulting services http://www.zylin.com ___ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development

Re: [Openocd-development] arm1136 download problems performance

Could be an (ft2232) interface problem? I'll try this on Monday hopefully on parport ZY1000. Did you try tms_sequence long It's surprising that *reducing* the number of TAP_IDLE's fixes things... -- Øyvind Harboe Embedded software and hardware consulting services http://www.zylin.com

Re: [Openocd-development] arm1136 download problems performance

So, every data word is written but at every other address. Not so quick! :-) Is 0 being written to every other address, or is every other address being written to? See this comment from the arm11 code: * The repeated TAP_IDLE's do not cause a repeated execution * if passed without leaving

Re: [Openocd-development] Beagleboard post reset event

Øyvind Harboe wrote: Committed take #3 + your patch to the config file to allow more in depth testing. A patch to document the event in openocd.texi would be greatly appreciated! Something like in attachment? Best regards Dirk Subject: [PATCH] Add post reset event documentation From: Dirk

Re: [Openocd-development] Beagleboard post reset event

Committed. Thanks! -- Øyvind Harboe Embedded software and hardware consulting services http://www.zylin.com ___ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development

Re: [Openocd-development] PIC32 Open OCD and Flyswatter - failure tocomplete initialisation

Thanks for the replies. Ok, I CAN connect to OpenOCD with Telnet, it threw me because I expected to see messages like: *Warning:no telnet port specified, using default port Warning:no gdb port specified, using default port Warning:no tcl port specified, using default port * But

Re: [Openocd-development] PIC32 Open OCD and Flyswatter - failure tocomplete initialisation

On Saturday 12 September 2009, Strontium wrote: I expected to see messages like: Warning:no telnet port specified, using default port Warning:no gdb port specified, using default port Warning:no tcl port specified, using default port But I don't... I guess these messages

Re: [Openocd-development] arm1136 download problems performance

Ok, Here is the script I run on various builds (svn 1504 - 1900) init halt reset init memwrite burst enable load_image ./images/test.bin 0x8000 bin verify_image ./images/test.bin 0x8000 bin exit Here are some results: # svn 1600 #downloaded 88 byte in 0.008575s #verified 88 bytes in

[Openocd-development] Problem with a certain STM32 version and Olimex jtag tiny

I have a small problem with Olimex Jtag Tiny but only with a newer STM32 processor Here is three situations, the first if the evaluation board with Olimex Tiny, the second is my keypad with J-Link and the third one is my keypad with Olimex Tiny. The configuration file is identical for all