On 15 December 2011 05:44, Dean Glazeski dngl...@gmail.com wrote:
Hey guys,
Long time no see. Recently, I got a bug request through Red Hat bugs to
package the newer version of OpenOCD for Fedora. It's been a while, but it
finally kicked me in gear to take care of it (seeing as 0.5.0 was
Hello,
you can try to use the offset parameter (flash bank address):
flash write_image image 0x0800
Regards,
Mathias
On 15.12.2011 01:31, Damjan Marion wrote:
Hi,
I tried to flash STM32 F2 in the same way like i do on F1 devices and hit
some issues:
My 1st try was with
I tried to flash STM32 F2 in the same way like i do on F1
devices and hit some issues:
My 1st try was with stm32f2x mass_erase 0 but seems that
there is no subcommands registered.
You can use the following command instead:
monitor flash erase_sector 0 0 11
Laurent
-- Forwarded message --
From: Mail Delivery Subsystem mailer-dae...@googlemail.com
Date: 15 December 2011 16:14
Subject: Delivery Status Notification (Failure)
To: axo...@gmail.com
Delivery to the following recipient failed permanently:
openocd-de...@lists.sourceforge.net
On 15 December 2011 15:15, Akos Vandra axo...@gmail.com wrote:
-- Forwarded message --
From: Mail Delivery Subsystem mailer-dae...@googlemail.com
Date: 15 December 2011 16:14
Subject: Delivery Status Notification (Failure)
To: axo...@gmail.com
Delivery to the following
Hi!
Sorry for my last letter, my target really was powered down. (OOPS)
However, now I am getting a succ. IDCODE read, but after that openocd
enters an endless loop.
Ouptut:
akos@FM12BQ:~/Downloads/openocd-libswd-git4/libswd$ src/openocd -s tcl
-f openocd-swd.cfg
Open On-Chip Debugger
hi, sorry for that :)
Here's the debug level output:
akos@FM12BQ:~/Downloads/openocd-libswd-git4/libswd$ reset^C
akos@FM12BQ:~/Downloads/openocd-libswd-git4/libswd$ src/openocd -s tcl
-f openocd-swd.cfg
Open On-Chip Debugger 0.5.0-dev-g918cd08-dirty (2011-12-08-12:15)
Licensed under GNU GPL v2
