Just posted a new release: 2.7p8
Besides a lot of small bug fixes, the new changes are:
Autodiscovery of the HA7Net must masters is fully implemented.
--HA7Net=192.168.2.23 # Specified address
--HA7Net # Use udp multicasting to find HA7Net
Note that your firewall needs to
Just had a look at
http://www.opcfoundation.org/Default.aspx/01_about/01_whatis.asp?MID=AboutOPC
It seems that OPC is rather windows-centric, using .NET and COM bindings.
Cogent Real-Time makes a linux compatability layer:
http://www.opcdatahub.com/Docs/bookdho.html
All in all, the premise is
Same here, I thought our circuit somehow broke.
If I set the PIO high, the sensed goes down, but in the normal mode (PIO
low) I always get 1 for sensed.
Our version is 2.7p2 (and it worked when I installed this bit of hardware),
but I can't remember what we had before. I found the old packages
I just checked the current version with a Ohm-meter (continuity). I can set
and unset PIO.A just fine. That's 2.7p8
I think the problem you refer to was fixed in March.
Paul Alfille
On Sun, Nov 9, 2008 at 6:14 PM, Michael Weber [EMAIL PROTECTED] wrote:
Same here, I thought our circuit somehow
Hi all:
We finally rebuilt our very-aged server for our SmartApartment
facility. As part of that upgrade, we upgraded from owfs2.6 to 2.7.
Now, all of our DS2406-based devices are very broke.
Symptoms include:
reading sensed.A is ALWAYS 1 (although alarms seem to work correctly).
This has been
