ct}=="FT231X USB UART",
ATTRS{serial}=="DC00HJ03", SYMLINK+="moteino-usb"
------
These rules will create the symlinks /dev/plm, /dev/1wire-master0,
/dev/1wire-master1, and /dev/moteino-usb for the FTDI seri
What about something like:
echo 5 /mnt/1wire/EF.2D652015/barometer
instead of using nano?
Cheers,
Eloy Paris.-
On Mon, Jun 22, 2015 at 02:27:00PM +0200, Eric Baumann wrote:
Hallo again.
I found a possibly cause:
The polling frequency seems to be set incorrectly :
pi
,
Eloy Paris.-
--
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly
a couple in operation and they have
worked well. There's Arduino libraries out there that allow you to talk
to this sensor very easily.
Cheers,
Eloy Paris.-
--
Dive into the World of Parallel Programming The Go Parallel
for ATMega), which I have been using with no issues
for about two years, but I'm always curious to see how others have
tackled the same problem.
Cheers,
Eloy Paris.-
--
Meet PCI DSS 3.0 Compliance Requirements with EventLog
The owfs binary should also be run with a mount point of /mnt/1-wire so 1-wire
devices can show up at that directory. It doesn't seem like owfs is running.
Cheers,
Eloy Paris.-
On May 7, 2014 12:44:11 AM GMT+04:00, Roberto Spadim robe...@spadim.com.br
wrote:
more than one server is opening
to give this a try, and the discussion didn't end in anything.
Please keep us posted on this as it's a very important topic.
Cheers,
Eloy Paris.-
On 10/02/14 14:36, Colin Reese wrote:
Silly me; atmega328 has i2c. I can use the 2483, but need to get data
out.
Per the earlier conversation
.
Cheers,
Eloy Paris.-
On Tue, Feb 11, 2014 at 4:21 AM, Eloy Paris pe...@chapus.net
mailto:pe...@chapus.net wrote:
Colin, Stuart,
On 02/10/2014 10:30 PM, Colin Reese wrote:
Anybody chime in with status on this? I think this will be where I
go.
On 2/10/2014
(the developer behind the Moteino) is very knowledgeable and might
be able to provide some guidance. Also, there are a few projects he's
done that are mentioned on his blog. Some of these might provide an idea
of how to approach the problem.
Cheers,
Eloy Paris
you (the RPi) talks to the uC
and the uC talks to the RFM. On the other side (remote sensor side) the
uC only talks to the RFM.
I guess I'm missing something...
Cheers,
Eloy Paris.-
On Tue, Feb 11, 2014 at 11:05 AM, Eloy Paris pe...@chapus.net
mailto:pe...@chapus.net wrote:
Hi Colin
using USB and
talk to it through some serial communication protocol that you come up with.
Felix apparently has the Moteino-USB, which comes with an USB interface.
Cheers,
Eloy Paris.-
I'll start off with the bitbanging and see if I can't find a way to get
a DS2483 and the AVR talking.
On Tue
. It
should be just like an Arduino on that regard.
Cheers,
Eloy Paris.-
On Tue, Feb 11, 2014 at 11:39 AM, Eloy Paris pe...@chapus.net
mailto:pe...@chapus.net wrote:
On 02/11/2014 02:29 PM, Colin Reese wrote:
That sounds right. My complaint was that I have all my SPI on the Pi
connection and sending a temperature value
received from a remote wireless sensor? It's all about how the data is
interpreted on the PC side, right? ;-)
The Arduino/Moteino/uC will also be able to read data sent to it by the
RPi through the USB connection.
Cheers,
Eloy Paris.-
On Tue, Feb 11
at 12:11 PM, Eloy Paris pe...@chapus.net
mailto:pe...@chapus.net wrote:
On 02/11/2014 02:58 PM, Colin Reese wrote:
I have very little Arduino experience, but I was under the
impression
that the serial console over the FTDI was typically just used
for debug.
What's
.
Is there anything else I should be doing to get this to work? I've read
http://owfs.org/index.php?page=external-sensor-design and I'm wondering
what I might be missing, or what the status of this code is.
Cheers,
Eloy Paris.-
---
Debug output from owserver
for two cases.
I am starting owserver like this:
owserver --debug -c /etc/owfs/owfs.conf --timeout_volatile 300
--error_print 0 --error_level 7 --nozero -p 4305
And owfs like this:
owfs --debug --allow_other -C -s localhost:4305 /owfs2
Cheers,
Eloy Paris
I forgot to include debugging output from owserver's startup. There's a
Duplicate family entry: rtd_family that looks suspicious.
Cheers,
Eloy Paris.-
-
DEBUG MODE
libow version:
2.9p0
DEBUG: ow_opt.c:(284) Configuration file
I was not aware, but Apple's Magsafe connector has a 1-Wire device in
it. I thought this was pretty interesting so wanted to share:
http://www.righto.com/2013/06/teardown-and-exploration-of-magsafe.html
Cheers,
Eloy Paris
--nozero disables the Zeroconf/Bonjour functionality.
http://owfs.org/index.php?page=bonjour-zeroconf
Cheers,
Eloy Paris.-
On 04/26/2013 07:51 PM, Don Veino wrote:
What does --nozero option do? Does it prevent recording of bad readings?
I can't find it in the man pages on owfs.org http
Application Note 318
describes how to use a GPIO pin to talk to a DS18S20 sensor:
http://www.atmel.com/images/doc2579.pdf
You can download sample code that goes with it. I've used it on an
ATmega and it works very well. It's C, so it can be ported easily to
other architectures.
Cheers,
Eloy Paris
There's https://github.com/smurfix/owslave. I don't know if there's a
newer version, though. AVR-based. Some people here might even have used it.
There are commercial versions as well. The BAE device is one that is
supported by OWFS.
Cheers,
Eloy Paris.-
On 02/25/2013 10:32 AM, Håkan
it up and sending the
link ;-)
Cheers,
Eloy Paris.-
--
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_feb
Hi Tomasz,
I believe Paul said in a recent message that he's fixed this. Googling...
Yes, right here:
http://www.mail-archive.com/owfs-developers@lists.sourceforge.net/msg09417.html
Cheers,
Eloy Paris.-
On 01/25/2013 10:22 AM, Tomasz Nieszawski wrote:
Hello
I have some problems
that should be --nozero.
Cheers,
Eloy Paris.-
--
LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial
Remotely access PCs and mobile devices and provide instant support
Improve your efficiency, and focus
Hi Mick,
On 12/20/2012 08:04 PM, Mick Sulley wrote:
Yes that's fixed it. I also have to add --nozero to get owhttpd to work
as well.
What does it do?
My guess is that it disables the Zeroconf/Bonjour functionality.
http://owfs.org/index.php?page=bonjour-zeroconf
Cheers,
Eloy Paris
?
Cheers,
Eloy Paris.-
On Fri, Nov 23, 2012 at 6:46 AM, Schinken
schin...@hackerspace-bamberg.de
mailto:schin...@hackerspace-bamberg.de wrote:
Hi,
is it possible to specify an own 1-Wire device in owfs?
We used an electronic thermostat with an open firmware OpenHR20
there.
Cheers,
Eloy Paris.-
ow-centurion-20121123.tar.bz2
Description: application/bzip
--
Monitor your physical, virtual and cloud infrastructure from a single
web console. Get in-depth insight into apps, servers
are twisted. Otherwise there
will be EMI issues.
Perhaps what you have is the product of a manufacturing problem? I would
contact the manufacturer and ask why the pairs are not twisted, when
they should be.
Cheers,
Eloy Paris
.
Good luck with your project! Let us know how things go.
Cheers,
Eloy Paris.-
--
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how
On 06/18/2012 02:57 PM, Eric Vickery wrote:
On 6/16/2012 3:27 PM, Eloy Paris wrote:
Hi Phil,
On 06/16/2012 07:43 AM, Phil White wrote:
On 13 June 2012 02:01, Eloy Parispe...@chapus.netwrote:
All 1-Wire devices have this presence pulse feature that you mention
-- that's a fundamental
directly to the PCB and attached a cat5 male connector to the
other side of the cable, and then into the jack on the wall). You can
try sending power through the cat5 cable; the above PCB supports that
(via configuration jumper).
Cheers,
Eloy Paris
of the simultaneous
temperature conversion feature.
Cheers,
Eloy Paris.-
2012/6/12 Eloy Paris pe...@chapus.net mailto:pe...@chapus.net
Hi Phil,
On 06/12/2012 08:36 PM, Phil White wrote:
Hi All,
This may, or may not, be applicable to this list. However, I am
hoping
only read the sensors that show up in a conditional search.
Cheers,
Eloy Paris.-
--
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how
.
http://marc.merlins.org/perso/homeha/2009-12.html#Temperature-monitoring-and-graphing-with-1wire-devices_-digitemp_-misterhouse_-and-cacti
I never looked into temploggerd so I can't comment on it. But I think
Cacti is great.
Cheers,
Eloy Paris
to be perfect because it would suspend the boot process for a
little bit.
Cheers,
Eloy Paris.-
There is a new command: owexist
It needs an update (even from the latest release) to
module/owshell/src/c/owexist.c
but you can then run:
address=;e=1; while [ $e -ne 0 ] ; do /opt/owfs/bin/owexist -q
if they can't yet connect to owserver.
Definitely another option. Perhaps add configuration options to the
clients so they don't fail/quit when they cannot contact owserver and
instead attempt a connection every X seconds?
Cheers,
Eloy Paris.-
On Mon, May 21, 2012 at 3:37 PM, Eloy Paris pe
to the DS2406 PIOA input?
Is the concern that the sensor's output is 0V or 12V and the DS2406 can
operate in the 0 to 5V range?
The DS2406 datasheet says that the PIOA pin can take up to 12 volts.
Cheers,
Eloy Paris
to use to
communicate with the PC world and still use the owfs interface they are
used to for 1-Wire devices.
Eloy Paris.-
On Mon, Feb 27, 2012 at 5:29 AM, ekgnkb3d achi...@gmx.de
mailto:achi...@gmx.de wrote:
Hi all,
beside using 1-Wire devices I would like to use other sensors
On 02/08/2012 06:40 PM, Mick Sulley wrote:
Thanks Eric - order placed.
That was quick! ;-)
Cheers,
Eloy Paris.-
--
Virtualization Cloud Management Using Capacity Planning
Cloud computing makes use of virtualization
it is looking pretty good.
I'd say these cheap sensors are a great option, but you definitely need
to hook them up to a microcontroller (it's not hard at all but it is not
typical PC development).
Cheers,
Eloy Paris.-
P.S. There are Arduino libraries to talk to these sensors so using an
Arduino
' environment.
I'm also looking forward to see it.
Sure thing; I hope to be able to share my experiences soon.
Cheers,
Eloy Paris.-
--
Try before you buy = See our experts in action!
The most comprehensive online learning
/voltage 1 a valid command if there are no DS2450 on the bus,
or is this a bug ? Maybe I have always had this problem from the very
beginning years ago.
No idea here, but it's a good question, and one I'd like to know the
answer to as well.
Cheers,
Eloy Paris.-
FYI just upgraded to 2.8p14
,
and microcontroller) and building a custom solution.
Cheers,
Eloy Paris.-
--
Ridiculously easy VDI. With Citrix VDI-in-a-Box, you don't need a complex
infrastructure or vast IT resources to deliver seamless, secure access
to design reliable networks.
Cheers,
Eloy Paris.-
On 12/15/2011 10:44 AM, Nick wrote:
Please forgive the long post and bear with me on this one.
My first 1-wire network, snaking around the house with 10 or so sensors and
over a long distance, has been a great success. Almost faultless performance
On 12/01/2011 06:12 PM, Peter Hollenbeck wrote:
I haven't received any owfs mail in two days. I presume there has been
traffic??
We're here! :-)
This list provides my most interesting and instructive reading so I
really miss it.
Agreed!
Cheers,
Eloy Paris
. Right
now you don't have a capacitor but when you put it in I think you should
connect it to pin 2 of the 2480B.
I don't see why you are getting the 85 degrees errors. Are the sensors
working in parasitic mode? If so, are the Vdd pins grounded?
Cheers,
Eloy Paris
Scratchpad command. So this looks like something on
the OWFS side and not on your emulated DS2431.
Cheers,
Eloy Paris.-
Last, the selection of a DS2431 is arbitrary, and if there's any
recommendation for a different memory oriented part to emulate then the
choice can easily be changed. It just
,
Eloy Paris.-
--
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
way to do this?
Thanks in advance.
Cheers,
Eloy Paris.-
--
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1
___
Owfs-developers
access operation. That's why I asked how one would go about it. But
thinking about this some more, this is just a memory read operation, and
there are plenty of examples of that in owlib (I've even implemented
this for the multi-sensor I'm developing, so I think I should be set).
Cheers,
Eloy
, Automake, and Libtool
http://shop.oreilly.com/product/9781593272067.do
Seems to have an online version here:
http://www.freesoftwaremagazine.com/books/autotools_a_guide_to_autoconf_automake_libtool
Cheers,
Eloy Paris.-
I remember the IBM mainframe days with the JCL punch cards that you placed
around that can do it but it is
expensive.
As Marc Merlin pointed out, INSTEON is not a bad option for controlling
things like lights (I, like Marc, am an INSTEON user). I do not think it
is perfect, but I think it is reasonably good.
Cheers,
Eloy Paris.-
On 20/10/11 13:41, Robert Conway wrote
you
that impression? Based on Maxim's support of the technology it seems to
me like they are still behind it (yes, they have killed some products
but overall it seems like they are still backing the technology and
offering a good selection of products).
Cheers,
Eloy Paris
On 09/22/2011 04:25 PM, Colin Law wrote:
[...]
So I think I need owshell on the Plug and owserver on
the wrt54G.
Or owfs (the binary) on the plug (instead of owshell)... it all depends
on how you are doing things (what language you'll use) on the plug.
Cheers,
Eloy Paris
and UART subsystems at the same time. No
bitbanging in these cases :-)
Cheers,
Eloy Paris.-
--
BlackBerryreg; DevCon Americas, Oct. 18-20, San Francisco, CA
Learn about the latest advances in developing
it).
Cheers!
--
Eloy Paris
--
BlackBerryreg; DevCon Americas, Oct. 18-20, San Francisco, CA
http://p.sf.net/sfu/rim-devcon-copy2
___
Owfs-developers mailing list
Owfs-developers
. Is this correct?
Don't know if the other 18x20's behave this way but I noticed the 18B20
behavior when reading its datasheet.
Cheers,
Eloy Paris.-
Reading /uncached ignores a simultaneous conversion and forces new
measurement.
Paul
more about your custom sensors and your 1-wire network (it
always help to know what others are doing/using); have you documented your
stuff somewhere? Have you built any microcontroller-based 1-wire sensors?
Cheers,
--
Eloy Paris
Hi list,
I wanted to close the loop on this with one final comment:
On 07/07/2011 10:55 PM, Eloy Paris wrote:
On 07/07/2011 04:41 PM, Paul Alfille wrote:
I think I'm starting to see your question. You are wondering how to read
and write in the middle of a file (memory buffer).
Yes
the flags and parsed path information. This way we use a similar data
structure independent of the data type (float, integer, boolean, data,
memory).
Yup; thanks for the explanation. It's easier to understand things now
after your explanation.
Cheers,
Eloy Paris
to read an
arbitrary number of microcontroller memory starting at a specified offset.
After your explanations I am accomplishing what I need like this (for
example):
shell$ owread --hex --size=16 --start=0 /99.010203040506/generic/memory
Cheers,
Eloy Paris
!
Eloy Paris.-
--
All of the data generated in your IT infrastructure is seriously valuable.
Why? It contains a definitive record of application performance, security
threats, fraudulent activity, and more. Splunk takes
Hi Paul,
On 07/07/2011 10:55 PM, Eloy Paris wrote:
[...]
After your explanations I am accomplishing what I need like this (for
example):
shell$ owread --hex --size=16 --start=0 /99.010203040506/generic/memory
This had me scratching my head -- I was reading from microcontroller
memory
-master0 -C --error_print 0
--error_level 5 --nozero
The TCP errors seem to be causing a long delay, but as far as I can see
there is no need for any TCP connections since owserver is only talking
to a serial device. Any ideas why TCP connections are being attempted?
Cheers,
Eloy Paris
with hardware flow
control, which causes communications to succeed right way. I am
currently using -d, i.e. emulation mode.
Hope this helps.
Cheers,
Eloy Paris.-
--
WhatsUp Gold - Download Free Network Management Software
,
...
};
and then I access the sensors like this:
foreach my $sensor (keys %sensors) {
if (!open SENSOR, /owfs/$sensor/temperature) {
...
Hope this helps.
Cheers,
Eloy Paris.-
--
Create and publish websites
something
entirely different, but would it not be possible to use the ser2net/RFC
2217 support that Paul added to owlib in December 2010/January 2011 for
what you are trying to do?
Cheers,
Eloy Paris.-
The trouble I ran into is that as my code is based on the EtherWeather
driver, it has
of the DS18B20 is *not* left floating? (Note added not.)
Otherwise I don't totally follow and would have to wait for the reworked
statement.
Cheers,
Eloy Paris.-
The LinkUSB family and the LinkHub family all put +5V on the cable so
the T-Sense is never left in parasitic mode.
All Link masters
is that the Vdd pin of the DS18B20 is left floating.
Ahh, totally clear now. Thanks!
Cheers,
Eloy Paris.-
-Original Message-
From: Eloy Paris [mailto:pe...@chapus.net]
Sent: Thursday, March 10, 2011 9:57 AM
To: owfs-developers@lists.sourceforge.net
Subject: Re: [Owfs-developers] [SOLVED
.
Cheers,
Eloy Paris.-
P.S. Regarding iButtonLink's statement that they have not been able to
recreate network instability with more than 30 sensors on a bus all with
floating Vdd, perhaps they haven't tried in a high humidity scenario
like was the case for the one sensor that I had outside
Hi list,
I am happy to report that this problem is solved! Please see below
(inline) for the details...
On 03/02/2011 09:49 PM, Eloy Paris wrote:
On 03/02/2011 05:49 PM, Paul Alfille wrote:
Maybe some static charge in the Vcc lead confused the sensor in the
lightning storm?
You know what
humidity?
Thanks in advance for any suggestions.
Cheers,
Eloy Paris.-
--
Free Software Download: Index, Search Analyze Logs and other IT data in
Real-Time with Splunk. Collect, index and harness all the fast moving
by owfs in the equivalent degrees F.
So yes, that is a good question -- how does one tell the difference
between true 85 C and error 85 C? (not that I am expecting to read a
true 85 C, although I suspect things get pretty hot in an attic in the
summer).
Cheers,
Eloy Paris.-
Best of luck
Mick
that helps.
It does; thanks a lot for the insight :-)
Cheers,
Eloy Paris.-
On Tue, Mar 1, 2011 at 11:54 AM, Eloy Parispe...@chapus.net wrote:
Hi list,
Apologies for the slightly off-topic message but I figured someone here
may have some suggestions for me on this non-owfs issue I am having
on my part and
it is not currently measuring water temperature, but it should be
sufficiently protected to measure outside temperature at this location,
so I may just repurpose it and build another sensor for the fish tank.
That'll probably be the best solution.
Cheers,
Eloy Paris.-
On Tue
Hi patyrk,
On 03/02/2011 05:09 AM, patyrk wrote:
Dnia 2011-03-01, wto o godzinie 12:54 -0500, Eloy Paris pisze:
If grounding Vcc does not help I think my next step should be to protect
from the elements the sensor, its pins, and the small PCB. Any ideas on
how to accomplish
Hi Jan,
On 03/02/2011 03:49 AM, Jan Chrillesen wrote:
On Tue, Mar 1, 2011 at 6:54 PM, Eloy Paris pe...@chapus.net
mailto:pe...@chapus.net wrote:
I have a DS18B20 sensor located outside. It is in a location that is
safe from water (unless it rains horizontally). My bus master reaches
).
Cheers,
Eloy Paris.-
Best of luck
Mick
On Tue, 2011-03-01 at 12:54 -0500, Eloy Paris wrote:
Hi list,
Apologies for the slightly off-topic message but I figured someone here
may have some suggestions for me on this non-owfs issue I am having...
I have a DS18B20 sensor located
On 03/02/2011 05:36 PM, Scott wrote:
Ooops!
I pulled the security off that gallery which should fix it. Try it again.
That worked; thanks!
Eloy Paris.-
I encased my sensors in epoxy to avoid water contact. Just solder up the
sensor, mix up some 2-part epoxy, and smear it over the chip
.
Cheers,
Eloy Paris.-
--
Free Software Download: Index, Search Analyze Logs and other IT data in
Real-Time with Splunk. Collect, index and harness all the fast moving IT data
generated by your applications, servers
On 01/18/2011 03:39 PM, Roberto Spadim wrote:
i´m reading ow_com.c and there´s some telnet implementation, is it
rfc2217 implementation??
Paul has been working on this. It started here, I think:
http://www.owfs.org/statcvs/2010-12.html#37
Cheers,
Eloy Paris.-
2011/1/18 Roberto Spadimrobe
by this
other program.
Cheers,
Eloy Paris.-
--
Learn how Oracle Real Application Clusters (RAC) One Node allows customers
to consolidate database storage, standardize their database environment, and,
should the need arise
that caching would help me here.
Cheers,
Eloy Paris.-
--
Learn how Oracle Real Application Clusters (RAC) One Node allows customers
to consolidate database storage, standardize their database environment, and,
should
as owfs (plus a port number) and then I can
view the 1-wire bus sensor values as web pages - excellent! :-)
Indeed, that's part of the beauty of the client-server architecture that
owfs uses. Makes thing very flexible.
Cheers,
Eloy Paris
-u.
After you have owserver running, you'd run owfs with something like:
/opt/owfs/bin/owfs --allow_other -C -s localhost:4304 /owfs --nozero
The other utilities are run in a similar way.
Hope this helps.
Cheers,
Eloy Paris
STDERR Can't open temperature file: $!\n;
exit 1;
}
my $temperature = SENSOR;
close SENSOR;
$temperature =~ s/ *//; # 82.7375 - 82.7375
# Do something with $temperature
Cheers,
Eloy Paris
just need to read temperature from a couple of DS18S20 sensors
why don't you give digitemp a try? Very simple program that does not
need any kernel support, is simple to build, and is just an apt-get
install digitemp away.
http://www.digitemp.com/ for more info.
Cheers,
Eloy Paris
to read (we'd block in recv() instead) and we wouldn't
have to check for EAGAIN or EWOULDBLOCK, I think.
Cheers,
Eloy Paris.-
--
Beautiful is writing same markup. Internet Explorer 9 supports
standards for HTML5, CSS3, SVG 1.1
...
Cheers,
Eloy Paris.-
--
The Next 800 Companies to Lead America's Growth: New Video Whitepaper
David G. Thomson, author of the best-selling book Blueprint to a
Billion shares his insights and actions to help propel your
.
Cheers,
Eloy Paris.-
I'll take a closer
look in time, but, for now, here are the packets:
last packet before going idle:
18:02:16.751481 IP (tos 0x0, ttl 64, id 43050, offset 0, flags [DF], proto
TCP (6), length 52)
zaru.nuke.56502 zaru.nuke.4304: Flags [.], cksum 0x477a
didn't chase it down and instead stopped using
aliases. Are you using aliases?
Cheers,
Eloy Paris.-
On Sun, 4 Apr 2010 21:15:01 -0400
Paul Alfillepaul.alfi...@gmail.com wrote:
...
The current problem list includes:
FreeBSD and OSX configuration
Flakiness on directory listing is some
heard from
anyone on it:
http://sourceforge.net/mailarchive/message.php?msg_name=4C8A12DC.8090509%40chapus.net
Cheers,
Eloy Paris.-
--
Nokia and ATT present the 2010 Calling All Innovators-North America contest
Create new
-developers
Cheers,
Eloy Paris.-
--
Nokia and ATT present the 2010 Calling All Innovators-North America contest
Create new apps games for the Nokia N8 for consumers in U.S. and Canada
$10 million total in prizes - $4M cash
if they are the same I have run into. I follow this mailing list
but sometimes that is not enough to know whether an issue you have run
into has already been reported.
Cheers,
Eloy Paris.-
--
Nokia and ATT present
running on ubuntu (2.6.32-24) ... maybe this works ...
Could you send the output from stty -a /dev/ttyUSB1 (change
/dev/ttyUSB1 to reflect the correct device for you LinkUSB) when using
minicom with and without hardware flow control enabled?
Cheers,
Eloy Paris.-
Am Mittwoch, den 15.09.2010
using OWFS aliases? Based on a quick
look at your log entries below it doesn't seem like it but I thought I'd
ask just in case and also take this as a chance to document my
experience with the alias feature since I had not done that yet.
Cheers,
Eloy Paris.-
I have been running owfs lights out
filesystems in userspace, so there is a userspace component
(library) as well that provides an API that applications must use. The
include files and related development stuff is provided by the
libfuse-dev package.
Cheers,
Eloy Paris
settings structure
Cheers,
Eloy Paris.-
On Fri, Aug 27, 2010 at 4:53 PM, Eloy Paris pe...@chapus.net
mailto:pe...@chapus.net wrote:
Hello,
I've seen this a few times... after some amount of inactivity, i.e.
nobody reading from the owfs-mounted directory for some time
Hi Paul,
On 09/01/2010 07:24 AM, Eloy Paris wrote:
On 09/01/2010 06:57 AM, Paul Alfille wrote:
Does this happen if you are reading the fake directory instead of a
real bus? I'm trying to distinguish between a cache problem and a FUSE
problem.
Pardon the ignorance but how do I read from
Paul,
On 09/01/2010 08:49 AM, Eloy Paris wrote:
I think I now understand what you meant... I am now starting owserver
like this:
/opt/owfs/bin/owserver --fake=28.0B1DA202,28.4C0AA202 ...
I'll let you know if I see a failure after some inactivity period but
please let me know
1 - 100 of 109 matches
Mail list logo