Hi Kevin,
you can also pull and hold the DOF-preview in M mode.
The metering scale on the right lights up as long you hold the lever in
place.
You can then track the changes in exposure balance according to your
changes of time or aperture...very convenient IMHO.
Thomas
Uh, Doh. I meant
Did you set the camera to release with lenses without an A position on
the lens, (custom function 16 if I remember correctly).
Kevin Waterson wrote:
I have a Porst 135mm 1.8-16 lense that I cannot get to work with
the *istD. I have tried all modes but the camera will not fire.
If it is set to M
Twas this very day, Paul Stenquist [EMAIL PROTECTED] wrote:
Are you pushing the green button when the lens is set to M? Are you
getting focus verification? Both of these might be necessary to get an
exposure
Thanks for your reply.
It fires now, is it possible to meter with this lens?
Kind
-type bellows...so it should be possible for you too!
Lots of success have fun!
Thomas
Waterson schrieb:
I have a Porst 135mm 1.8-16 lense that I cannot get to work with
the *istD. I have tried all modes but the camera will not fire.
If it is set to M then the shutter speed is displayed
This one time, at band camp, Thomas Stach [EMAIL PROTECTED] wrote:
Hi Kevin,
there is a custom function in which you must explicitly engage the
firing with non-A lenses. Have you done that already?
Yes
Have you also installed the new firmware which makes metering with
M-lenses much
Just press the little green button.
John
On Mon, 15 Mar 2004 09:31:34 +1100, Kevin Waterson [EMAIL PROTECTED]
wrote:
Twas this very day, Paul Stenquist [EMAIL PROTECTED] wrote:
Are you pushing the green button when the lens is set to M? Are you
getting focus verification? Both of these might
John Forbes [EMAIL PROTECTED] issued this cry:
Just press the little green button.
I press the little green button , when in M mode, and it changes the
the shutter speed. Is the meter supposed to be active?
Kind regards
Kevin
--
__
(_ \
The change in shutter speed reflects the meter reading. If it's too
slow, stop down. Then repeat your meter reading and shoot.
On Mar 14, 2004, at 8:05 PM, Kevin Waterson wrote:
John Forbes [EMAIL PROTECTED] issued this cry:
Just press the little green button.
I press the little green button ,
Uh, Doh. I meant to say if it's too slow, open up the stop. Then repeat
your meter reading and shoot. In any case, the *ist-D meter works very
well in multi segment, center weighted, and spot. it's a perrfectly
adequate exposure tool.
On Mar 14, 2004, at 8:29 PM, Paul Stenquist wrote:
The
9 matches
Mail list logo
