Plenty of action as always on this site! Now I have an uneven turntable that
obviously will cause dragg let alone strain on the spring. The spindle must
be slightly bent. Is this fixable, and I suppose it is? Your commments
please?Also would like to hear from folk with variatons on a
I'd swap out the turntable before I condemned the spindle. Shafts can be
straightened but I would think it would be easier to install a replacement
unless it is a very rare machine with an unusual motor.
Ron L
-Original Message-
From: phono-l-boun...@oldcrank.org
Bent spindle? Is the motor and motor board plumb? How tight is the
turntable on the spindle? Bent spindles are pretty rare. Who makes the
machine? Is it so uneven the turntable is hitting the case causing the drag
you speak of?
Oldcranky
Mike
On Sat, Dec 11, 2010 at 6:32 AM, Ron L'Herault
You might try this, as it has worked for me: Rotate the turntable and find the
low point - GENTLY but firmly raise up on the turntable from the low point and
see if it straightens out. Just a thought...
Date: Sat, 11 Dec 2010 22:13:01 +1300
From: slowp...@clear.net.nz
To:
4 matches
Mail list logo
