Re: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

[Ron L'Herault via Phono-L]

Pictures sent off group.

 

Ron L

 

From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of John Selph
via Phono-L
Sent: Saturday, May 13, 2017 7:53 PM
To: 'Antique Phonograph List'
Cc: John Selph
Subject: Re: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

 

Ron,

My main interest is what the hinge part that is attached to the door looks
like.  I have the part that stays in the bottom, and it has arms with two
metal "dowels" but I have no idea what the part that attaches to the door
looks like.  Any help would be appreciated.

Thanks,

john

 

From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of Ron
L'Herault via Phono-L
Sent: Tuesday, May 2, 2017 10:18 PM
To: 'Antique Phonograph List'
Cc: Ron L'Herault
Subject: Re: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

 

Hi John,

 

No, I've never taken the door off.   Looking at the door installed though,
there is a bit of a cut out area so you can see the hinge from the inside
surface of the door.   It looks like the sliding part is curved down.  The
parts on the door seem to raise the curved parts up a bit when it closes.
I'll see if I can do a short video in the next day or two.

 

Ron L

 

From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of John Selph
via Phono-L
Sent: Tuesday, May 02, 2017 10:53 PM
To: 'Antique Phonograph List'
Cc: John Selph
Subject: Re: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

 

Ron,

Was just looking over my door hardware and the photos you sent.  Have you
ever removed the door from your unit?  I curious as to how the bottom
hinge/pivot function.  I have a pair of, what appears to be, identical
pieces as the ones installed on the bottom 2X4.  They also look like the
ones that are recessed into the door sides in your photo, but I'm not sure
how they would function together.

Thanks again,

John

 

From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of Ron
L'Herault via Phono-L
Sent: Wednesday, April 5, 2017 2:38 PM
To: 'Antique Phonograph List'
Cc: Ron L'Herault
Subject: Re: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

 

more door hinge.   What else do you need?

 

Ron L

 

From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of John Selph
via Phono-L
Sent: Wednesday, April 05, 2017 12:22 PM
To: 'Antique Phonograph List'
Cc: John Selph
Subject: Re: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

 

Thanks Ron.  I had a crank that had a female end that would accept a 3/8"
piece of "all thread" but the outside diameter was too large for the
decorative escutcheon plate that mounts over the hole in the cabinet.  Don't
happen to have a photo of the details of the front door, would you.  All I
have is what appears to be piece of 2X4 that fits in the bottom, with a
couple of pieces of hardware on it.

 

From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of Ron
L'Herault via Phono-L
Sent: Tuesday, April 4, 2017 8:34 PM
To: 'Antique Phonograph List'
Cc: Ron L'Herault
Subject: Re: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

 

I've got a 611. They are supposed to be the same except for decorative
parts. Could you use a Victor crank and re-therad it?

 

Door dimensions:  17 1/8 wide, 20 9/16 high, 3/4" thick including the
veneer.  It looks like there is a taper on the top so the backside dimension
for the height would be a little less.

 

Ron L

 

From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of John Selph
via Phono-L
Sent: Tuesday, April 04, 2017 3:22 PM
To: 'Antique Phonograph List'
Cc: John Selph
Subject: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

 

I have tried several that I had acquired over time and none fit correctly.  
it seems the threaded portion is 3/8" X 24 TPI.  Length measures appx 7"
from threaded end to bend, with a drop of appx 4.75".

Also need front door, or photos of same with measurements.

Thanks,

John

 

"Once in the wilds of Afghanistan I lost my corkscrew, and we were forced to
live on nothing but food and water for days."  W. C. Fields

 

 
<http://post.spmailtechn.com/f/a/U65-wT1HJb6ZcglXuA3w7A~~/AABF2wA~/RgRa-PFLP0EIACyI94rZB7lXA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YAw1Mi4zOS41MS4xODRCCgAAy70XWdCMkvlSGGFyY2hpdmVAbWFpbC1hcmNoaXZlLmNvbQlRBABES2h0dHA6Ly9wb3N0LnNwbWFpbHRlY2huLmNvbS9xL2pKUFBKOXdXc01vMlBmdGliMGdVYlF-fi9BQUJGMndBfi9SZ1JheFNYa1BrRUcCe30~
IACxulM_JpmdXA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YAw1Mi4zOS41MS4xODRCCgAAZPL
jWIUZph5SFGxoZXJhdWx0QHZlcml6b24ubmV0CVEEAEcCe30~> 

 
<http://post.spmailtechn.com/f/a/uZ3s3e70cLgCatoX52sALA~~/AABF2wA~/RgRa-PFLP0EIACyI94rZB7lXA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YAw1Mi4zOS41MS4xODRCCgAAy70XWdCMkvlSGGFyY2hpdmVAbWFpbC1hcmNoaXZlLmNvbQlRBABES2h0dHA6Ly9wb3N0LnNwbWFpbHRlY2huLmNvbS9xL0NnTkY2dXc4RzMxTXE1ZjRma2dON1F-fi9BQUJGMndBfi9SZ1JheFgxSFBrRUcCe30~
IACxyAdSSJxJXA3NwY

Re: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

[John Selph via Phono-L]

Ron,

My main interest is what the hinge part that is attached to the door looks
like.  I have the part that stays in the bottom, and it has arms with two
metal "dowels" but I have no idea what the part that attaches to the door
looks like.  Any help would be appreciated.

Thanks,

john

 

From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of Ron
L'Herault via Phono-L
Sent: Tuesday, May 2, 2017 10:18 PM
To: 'Antique Phonograph List'
Cc: Ron L'Herault
Subject: Re: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

 

Hi John,

 

No, I've never taken the door off.   Looking at the door installed though,
there is a bit of a cut out area so you can see the hinge from the inside
surface of the door.   It looks like the sliding part is curved down.  The
parts on the door seem to raise the curved parts up a bit when it closes.
I'll see if I can do a short video in the next day or two.

 

Ron L

 

From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of John Selph
via Phono-L
Sent: Tuesday, May 02, 2017 10:53 PM
To: 'Antique Phonograph List'
Cc: John Selph
Subject: Re: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

 

Ron,

Was just looking over my door hardware and the photos you sent.  Have you
ever removed the door from your unit?  I curious as to how the bottom
hinge/pivot function.  I have a pair of, what appears to be, identical
pieces as the ones installed on the bottom 2X4.  They also look like the
ones that are recessed into the door sides in your photo, but I'm not sure
how they would function together.

Thanks again,

John

 

From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of Ron
L'Herault via Phono-L
Sent: Wednesday, April 5, 2017 2:38 PM
To: 'Antique Phonograph List'
Cc: Ron L'Herault
Subject: Re: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

 

more door hinge.   What else do you need?

 

Ron L

 

From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of John Selph
via Phono-L
Sent: Wednesday, April 05, 2017 12:22 PM
To: 'Antique Phonograph List'
Cc: John Selph
Subject: Re: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

 

Thanks Ron.  I had a crank that had a female end that would accept a 3/8"
piece of "all thread" but the outside diameter was too large for the
decorative escutcheon plate that mounts over the hole in the cabinet.  Don't
happen to have a photo of the details of the front door, would you.  All I
have is what appears to be piece of 2X4 that fits in the bottom, with a
couple of pieces of hardware on it.

 

From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of Ron
L'Herault via Phono-L
Sent: Tuesday, April 4, 2017 8:34 PM
To: 'Antique Phonograph List'
Cc: Ron L'Herault
Subject: Re: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

 

I've got a 611. They are supposed to be the same except for decorative
parts. Could you use a Victor crank and re-therad it?

 

Door dimensions:  17 1/8 wide, 20 9/16 high, 3/4" thick including the
veneer.  It looks like there is a taper on the top so the backside dimension
for the height would be a little less.

 

Ron L

 

From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of John Selph
via Phono-L
Sent: Tuesday, April 04, 2017 3:22 PM
To: 'Antique Phonograph List'
Cc: John Selph
Subject: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

 

I have tried several that I had acquired over time and none fit correctly.  
it seems the threaded portion is 3/8" X 24 TPI.  Length measures appx 7"
from threaded end to bend, with a drop of appx 4.75".

Also need front door, or photos of same with measurements.

Thanks,

John

 

"Once in the wilds of Afghanistan I lost my corkscrew, and we were forced to
live on nothing but food and water for days."  W. C. Fields

 

 
<http://post.spmailtechn.com/f/a/jmmoKKn2cgsp2sX_FUQrIQ~~/AABF2wA~/RgRa-M_1P0EIACyI94rRfB9XA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YA01Mi4zNy4xMTkuMTk2QgoAAHWcF1nQjGiyUhhhcmNoaXZlQG1haWwtYXJjaGl2ZS5jb20JUQQAREtodHRwOi8vcG9zdC5zcG1haWx0ZWNobi5jb20vcS9qSlBQSjl3V3NNbzJQZnRpYjBnVWJRfn4vQUFCRjJ3QX4vUmdSYXhTWGtQa0VHAnt9
IACxulM_JpmdXA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YAw1Mi4zOS41MS4xODRCCgAAZPL
jWIUZph5SFGxoZXJhdWx0QHZlcml6b24ubmV0CVEEAEcCe30~> 

 
<http://post.spmailtechn.com/f/a/MM5k6RhGPU5o8_WGPxOm1Q~~/AABF2wA~/RgRa-M_1P0EIACyI94rRfB9XA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YA01Mi4zNy4xMTkuMTk2QgoAAHWcF1nQjGiyUhhhcmNoaXZlQG1haWwtYXJjaGl2ZS5jb20JUQQAREtodHRwOi8vcG9zdC5zcG1haWx0ZWNobi5jb20vcS9DZ05GNnV3OEczMU1xNWY0ZmtnTjdRfn4vQUFCRjJ3QX4vUmdSYXhYMUhQa0VHAnt9
IACxyAdSSJxJXA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YA0zNS4xNjMuMTIxLjMzQgoAAMd
J5FgX-HY2Ug5Kc2VscGhAY294Lm5ldAlRBABHAnt9> 

 
<

Re: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

[Ron L'Herault via Phono-L]

Hi John,

 

No, I've never taken the door off.   Looking at the door installed though,
there is a bit of a cut out area so you can see the hinge from the inside
surface of the door.   It looks like the sliding part is curved down.  The
parts on the door seem to raise the curved parts up a bit when it closes.
I'll see if I can do a short video in the next day or two.

 

Ron L

 

From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of John Selph
via Phono-L
Sent: Tuesday, May 02, 2017 10:53 PM
To: 'Antique Phonograph List'
Cc: John Selph
Subject: Re: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

 

Ron,

Was just looking over my door hardware and the photos you sent.  Have you
ever removed the door from your unit?  I curious as to how the bottom
hinge/pivot function.  I have a pair of, what appears to be, identical
pieces as the ones installed on the bottom 2X4.  They also look like the
ones that are recessed into the door sides in your photo, but I'm not sure
how they would function together.

Thanks again,

John

 

From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of Ron
L'Herault via Phono-L
Sent: Wednesday, April 5, 2017 2:38 PM
To: 'Antique Phonograph List'
Cc: Ron L'Herault
Subject: Re: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

 

more door hinge.   What else do you need?

 

Ron L

 

From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of John Selph
via Phono-L
Sent: Wednesday, April 05, 2017 12:22 PM
To: 'Antique Phonograph List'
Cc: John Selph
Subject: Re: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

 

Thanks Ron.  I had a crank that had a female end that would accept a 3/8"
piece of "all thread" but the outside diameter was too large for the
decorative escutcheon plate that mounts over the hole in the cabinet.  Don't
happen to have a photo of the details of the front door, would you.  All I
have is what appears to be piece of 2X4 that fits in the bottom, with a
couple of pieces of hardware on it.

 

From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of Ron
L'Herault via Phono-L
Sent: Tuesday, April 4, 2017 8:34 PM
To: 'Antique Phonograph List'
Cc: Ron L'Herault
Subject: Re: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

 

I've got a 611. They are supposed to be the same except for decorative
parts. Could you use a Victor crank and re-therad it?

 

Door dimensions:  17 1/8 wide, 20 9/16 high, 3/4" thick including the
veneer.  It looks like there is a taper on the top so the backside dimension
for the height would be a little less.

 

Ron L

 

From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of John Selph
via Phono-L
Sent: Tuesday, April 04, 2017 3:22 PM
To: 'Antique Phonograph List'
Cc: John Selph
Subject: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

 

I have tried several that I had acquired over time and none fit correctly.  
it seems the threaded portion is 3/8" X 24 TPI.  Length measures appx 7"
from threaded end to bend, with a drop of appx 4.75".

Also need front door, or photos of same with measurements.

Thanks,

John

 

"Once in the wilds of Afghanistan I lost my corkscrew, and we were forced to
live on nothing but food and water for days."  W. C. Fields

 

 
<http://post.spmailtechn.com/f/a/_s0wT1tQ5KvS_L2IQW9Ohg~~/AABF2wA~/RgRa6oCnP0EIACyER3C2tfVXA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YAw1Mi4zOS41MS4xODRCCgAAJ00JWVCC15dSGGFyY2hpdmVAbWFpbC1hcmNoaXZlLmNvbQlRBABES2h0dHA6Ly9wb3N0LnNwbWFpbHRlY2huLmNvbS9xL2pKUFBKOXdXc01vMlBmdGliMGdVYlF-fi9BQUJGMndBfi9SZ1JheFNYa1BrRUcCe30~
IACxulM_JpmdXA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YAw1Mi4zOS41MS4xODRCCgAAZPL
jWIUZph5SFGxoZXJhdWx0QHZlcml6b24ubmV0CVEEAEcCe30~> 

 
<http://post.spmailtechn.com/f/a/pSJqv6T8mJUa7iGCpXqz3w~~/AABF2wA~/RgRa6oCnP0EIACyER3C2tfVXA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YAw1Mi4zOS41MS4xODRCCgAAJ00JWVCC15dSGGFyY2hpdmVAbWFpbC1hcmNoaXZlLmNvbQlRBABES2h0dHA6Ly9wb3N0LnNwbWFpbHRlY2huLmNvbS9xL0NnTkY2dXc4RzMxTXE1ZjRma2dON1F-fi9BQUJGMndBfi9SZ1JheFgxSFBrRUcCe30~
IACxyAdSSJxJXA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YA0zNS4xNjMuMTIxLjMzQgoAAMd
J5FgX-HY2Ug5Kc2VscGhAY294Lm5ldAlRBABHAnt9> 

 
<http://post.spmailtechn.com/f/a/A2cDS77VuAiAa0dD8CxT0A~~/AABF2wA~/RgRa6oCnP0EIACyER3C2tfVXA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YAw1Mi4zOS41MS4xODRCCgAAJ00JWVCC15dSGGFyY2hpdmVAbWFpbC1hcmNoaXZlLmNvbQlRBABES2h0dHA6Ly9wb3N0LnNwbWFpbHRlY2huLmNvbS9xLzJuZnpXLWVmN3h5NTJ5Wkh2LW1hNVF-fi9BQUJGMndBfi9SZ1JheGsxRFBrRUcCe30~
IACxyAapH2oFXA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YA01Mi4zNy4xMTkuMTk2QgoAAMM
Z5VhjCVLpUhRsaGVyYXVsdEB2ZXJpem9uLm5ldAlRBABHAnt9> 

 
<http://post.spmailtechn.com/f/a/tBXeQxzKzeFC0a1qnslZjw~~/AABF2wA~/RgRa6oCnP0EIACyER3C2tfVXA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YAw1Mi4zOS41MS4xODRCCgAAJ00JWVCC15dSGGFyY2hpdmVAbWFpbC1hcmNoaXZlLmNvbQlRBABES2h0dHA6Ly9wb3N0LnNwbWFpbHRlY2huLmNvbS9xL

Re: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

[John Selph via Phono-L]

Ron,

Was just looking over my door hardware and the photos you sent.  Have you
ever removed the door from your unit?  I curious as to how the bottom
hinge/pivot function.  I have a pair of, what appears to be, identical
pieces as the ones installed on the bottom 2X4.  They also look like the
ones that are recessed into the door sides in your photo, but I'm not sure
how they would function together.

Thanks again,

John

 

From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of Ron
L'Herault via Phono-L
Sent: Wednesday, April 5, 2017 2:38 PM
To: 'Antique Phonograph List'
Cc: Ron L'Herault
Subject: Re: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

 

more door hinge.   What else do you need?

 

Ron L

 

From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of John Selph
via Phono-L
Sent: Wednesday, April 05, 2017 12:22 PM
To: 'Antique Phonograph List'
Cc: John Selph
Subject: Re: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

 

Thanks Ron.  I had a crank that had a female end that would accept a 3/8"
piece of "all thread" but the outside diameter was too large for the
decorative escutcheon plate that mounts over the hole in the cabinet.  Don't
happen to have a photo of the details of the front door, would you.  All I
have is what appears to be piece of 2X4 that fits in the bottom, with a
couple of pieces of hardware on it.

 

From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of Ron
L'Herault via Phono-L
Sent: Tuesday, April 4, 2017 8:34 PM
To: 'Antique Phonograph List'
Cc: Ron L'Herault
Subject: Re: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

 

I've got a 611. They are supposed to be the same except for decorative
parts. Could you use a Victor crank and re-therad it?

 

Door dimensions:  17 1/8 wide, 20 9/16 high, 3/4" thick including the
veneer.  It looks like there is a taper on the top so the backside dimension
for the height would be a little less.

 

Ron L

 

From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of John Selph
via Phono-L
Sent: Tuesday, April 04, 2017 3:22 PM
To: 'Antique Phonograph List'
Cc: John Selph
Subject: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

 

I have tried several that I had acquired over time and none fit correctly.  
it seems the threaded portion is 3/8" X 24 TPI.  Length measures appx 7"
from threaded end to bend, with a drop of appx 4.75".

Also need front door, or photos of same with measurements.

Thanks,

John

 

"Once in the wilds of Afghanistan I lost my corkscrew, and we were forced to
live on nothing but food and water for days."  W. C. Fields

 

 
<http://post.spmailtechn.com/f/a/JRgd2A0nQXSBevBxOGRamg~~/AABF2wA~/RgRa6nmuP0EIACyESC-0Y09XA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YA0zNS4xNjIuMTcyLjcwQgoAAC5GCVmu4fqhUhhhcmNoaXZlQG1haWwtYXJjaGl2ZS5jb20JUQQAREtodHRwOi8vcG9zdC5zcG1haWx0ZWNobi5jb20vcS9qSlBQSjl3V3NNbzJQZnRpYjBnVWJRfn4vQUFCRjJ3QX4vUmdSYXhTWGtQa0VHAnt9
IACxulM_JpmdXA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YAw1Mi4zOS41MS4xODRCCgAAZPL
jWIUZph5SFGxoZXJhdWx0QHZlcml6b24ubmV0CVEEAEcCe30~> 

 
<http://post.spmailtechn.com/f/a/TsLAOQSWOGvwCn6BjAzBSg~~/AABF2wA~/RgRa6nmuP0EIACyESC-0Y09XA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YA0zNS4xNjIuMTcyLjcwQgoAAC5GCVmu4fqhUhhhcmNoaXZlQG1haWwtYXJjaGl2ZS5jb20JUQQAREtodHRwOi8vcG9zdC5zcG1haWx0ZWNobi5jb20vcS9DZ05GNnV3OEczMU1xNWY0ZmtnTjdRfn4vQUFCRjJ3QX4vUmdSYXhYMUhQa0VHAnt9
IACxyAdSSJxJXA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YA0zNS4xNjMuMTIxLjMzQgoAAMd
J5FgX-HY2Ug5Kc2VscGhAY294Lm5ldAlRBABHAnt9> 

 
<http://post.spmailtechn.com/f/a/wQ-Nl53IEL6DyMASBWpXmg~~/AABF2wA~/RgRa6nmuP0EIACyESC-0Y09XA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YA0zNS4xNjIuMTcyLjcwQgoAAC5GCVmu4fqhUhhhcmNoaXZlQG1haWwtYXJjaGl2ZS5jb20JUQQAREtodHRwOi8vcG9zdC5zcG1haWx0ZWNobi5jb20vcS8ybmZ6Vy1lZjd4eTUyeVpIdi1tYTVRfn4vQUFCRjJ3QX4vUmdSYXhrMURQa0VHAnt9
IACxyAapH2oFXA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YA01Mi4zNy4xMTkuMTk2QgoAAMM
Z5VhjCVLpUhRsaGVyYXVsdEB2ZXJpem9uLm5ldAlRBABHAnt9> 

 
<http://post.spmailtechn.com/f/a/WnnxSFzp9tJZTUjTeIvZuw~~/AABF2wA~/RgRa6nmuP0EIACyESC-0Y09XA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YA0zNS4xNjIuMTcyLjcwQgoAAC5GCVmu4fqhUhhhcmNoaXZlQG1haWwtYXJjaGl2ZS5jb20JUQQAREtodHRwOi8vcG9zdC5zcG1haWx0ZWNobi5jb20vcS8xX2dYYTlxckdBcXM4amVFZ2FYanFBfn4vQUFCRjJ3QX4vUmdSYXhuc3ZQa0VHAnt9
IACxynvACZkdXA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YA0zNS4xNjIuMTcyLjcwQgoAAKp
H5VhErFa4Ug5Kc2VscGhAY294Lm5ldAlRBABHAnt9> 

___
Phono-L mailing list
http://phono-l.org
Unsubscribe: phono-l-unsubscr...@oldcrank.org

Re: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

[John Selph via Phono-L]

Thanks Ron.  I had a crank that had a female end that would accept a 3/8"
piece of "all thread" but the outside diameter was too large for the
decorative escutcheon plate that mounts over the hole in the cabinet.  Don't
happen to have a photo of the details of the front door, would you.  All I
have is what appears to be piece of 2X4 that fits in the bottom, with a
couple of pieces of hardware on it.

 

From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of Ron
L'Herault via Phono-L
Sent: Tuesday, April 4, 2017 8:34 PM
To: 'Antique Phonograph List'
Cc: Ron L'Herault
Subject: Re: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

 

I've got a 611. They are supposed to be the same except for decorative
parts. Could you use a Victor crank and re-therad it?

 

Door dimensions:  17 1/8 wide, 20 9/16 high, 3/4" thick including the
veneer.  It looks like there is a taper on the top so the backside dimension
for the height would be a little less.

 

Ron L

 

From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of John Selph
via Phono-L
Sent: Tuesday, April 04, 2017 3:22 PM
To: 'Antique Phonograph List'
Cc: John Selph
Subject: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

 

I have tried several that I had acquired over time and none fit correctly.  
it seems the threaded portion is 3/8" X 24 TPI.  Length measures appx 7"
from threaded end to bend, with a drop of appx 4.75".

Also need front door, or photos of same with measurements.

Thanks,

John

 

"Once in the wilds of Afghanistan I lost my corkscrew, and we were forced to
live on nothing but food and water for days."  W. C. Fields

 

 
<http://post.spmailtechn.com/f/a/W3KojiXJLKi8xkRdms2YRw~~/AABF2wA~/RgRaxk1GP0EIACxyAapH2yBXA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YA01Mi4zNy4xMTkuMTk2QgoAAMYZ5VhjCV7qUhhhcmNoaXZlQG1haWwtYXJjaGl2ZS5jb20JUQQAREtodHRwOi8vcG9zdC5zcG1haWx0ZWNobi5jb20vcS9qSlBQSjl3V3NNbzJQZnRpYjBnVWJRfn4vQUFCRjJ3QX4vUmdSYXhTWGtQa0VHAnt9
IACxulM_JpmdXA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YAw1Mi4zOS41MS4xODRCCgAAZPL
jWIUZph5SFGxoZXJhdWx0QHZlcml6b24ubmV0CVEEAEcCe30~> 

 
<http://post.spmailtechn.com/f/a/ppaNBemBe2Ce97T3pTGJYg~~/AABF2wA~/RgRaxk1GP0EIACxyAapH2yBXA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YA01Mi4zNy4xMTkuMTk2QgoAAMYZ5VhjCV7qUhhhcmNoaXZlQG1haWwtYXJjaGl2ZS5jb20JUQQAREtodHRwOi8vcG9zdC5zcG1haWx0ZWNobi5jb20vcS9DZ05GNnV3OEczMU1xNWY0ZmtnTjdRfn4vQUFCRjJ3QX4vUmdSYXhYMUhQa0VHAnt9
IACxyAdSSJxJXA3NwY1gEAFkGc2hhcmVkYQdoZWxsb181YA0zNS4xNjMuMTIxLjMzQgoAAMd
J5FgX-HY2Ug5Kc2VscGhAY294Lm5ldAlRBABHAnt9> 

___
Phono-L mailing list
http://phono-l.org
Unsubscribe: phono-l-unsubscr...@oldcrank.org

Re: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

[Ron L'Herault via Phono-L]

I've got a 611. They are supposed to be the same except for decorative
parts. Could you use a Victor crank and re-therad it?

 

Door dimensions:  17 1/8 wide, 20 9/16 high, 3/4" thick including the
veneer.  It looks like there is a taper on the top so the backside dimension
for the height would be a little less.

 

Ron L

 

From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of John Selph
via Phono-L
Sent: Tuesday, April 04, 2017 3:22 PM
To: 'Antique Phonograph List'
Cc: John Selph
Subject: [Phono-L] Wanted: Winding handle for Columbia 601 Viva Tonal

 

I have tried several that I had acquired over time and none fit correctly.  
it seems the threaded portion is 3/8" X 24 TPI.  Length measures appx 7"
from threaded end to bend, with a drop of appx 4.75".

Also need front door, or photos of same with measurements.

Thanks,

John

 

"Once in the wilds of Afghanistan I lost my corkscrew, and we were forced to
live on nothing but food and water for days."  W. C. Fields

 

 
 

___
Phono-L mailing list
http://phono-l.org
Unsubscribe: phono-l-unsubscr...@oldcrank.org