I've just shot my first roll in my Zero 2000 6x6 camera. I screwed up by
thinking the takeup reel goes on the right (as you look from the back), just
like most other cameras. I ended up shooting a roll that was wound onto the
takeup reel with the film on the outside and the paper on the inside.
- Original Message -
From: Chris Peregoy pere...@gl.umbc.edu
To: pinhole-discussion@p at ???
Sent: Monday, October 29, 2001 4:19 PM
Subject: Re: [pinhole-discussion] Zone Plate Focus stringency
TSHACK wrote:
very good. thanks.
That was going to be my reply
Mom, Chris is
TSHACK wrote:
very good. thanks.
That was going to be my reply
--
HTML
HEAD
TITLE/TITLE
/HEAD
BODY
BR
Chris Peregoy | http://www.gl.umbc.edu/~peregoy | http://imda.umbc.edu/
/BODY
/HTML
very good. thanks.
- Original Message -
From: Guillermo pen...@home.com
To: pinhole-discussion@p at ???
Sent: Monday, October 29, 2001 2:34 PM
Subject: Re: [pinhole-discussion] Zone Plate Focus stringency
- Original Message -
From: TSHACK tsh...@silver-bayou.com
In fact it will take place all over the world on the same day.
Everybody wishing to participate is invited to go out and make pinhole
images on April 28, 2002. Then each participant selects his/her best
pinhole image and can load it on the dedicated web site of the Worldwide
Pinhole Photography
- Original Message -
From: TSHACK tsh...@silver-bayou.com
That was going to be my question.
When you focus a lens using a ground glass, you are just making coincide
the -ideally- flat image the lens is projecting with the surface of the
ground glass, if you remove the ground glass, your
Where will it take place?
Thanks,
D. Saunders
On 29 Oct 2001 15:22:00 - Gregg Kemp gregg.kemp@???
writes:
Hi all,
As we approach the end of 2001, plans are already underway for next
year's pinhole day. The 2nd annual Worldwide Pinhole Photography
Day will be held on April 28,
I think the hardest thing will be handling the growing number of interested
pinholers around the world and would like to suggest putting images in
thumbnail form and viewing several at once to make it easier and quicker to
get through the gallery.
Jim K
- Original Message -
From: Gregg
Hello Everyone
I have been following your conversations and have found them very
interesting. I am relatively new to pinhole, about two years now since I
first saw what was going on the web. I am a painter and find that
photography makes an interesting a refreshing adjunct to my work. Pinhole
Try 85B. TO get accurate colors you will also need to use color correction
filters, like the ones you print through. I found the ones I got with just
the 85B were kind of neat though I only did a few shots at the end of the
class because we had a few sheets of paper left over...
have fun...it's
Dover Photo in Dover NJ has some stocks can get it for youit isn't
cheap...
be careful of very out of date chemistry. We had a Ilfochrome course at PV
this year that developed issues when we tried to use up some chemistrywe
bought new ( lost $$$ on the course).
If you want I can check
- Original Message -
From: Chris Peregoy pere...@gl.umbc.edu
To: pinhole-discussion@p at ???
Sent: Monday, October 29, 2001 12:14 PM
Subject: Re: [pinhole-discussion] Zone Plate Focus stringency
Guillermo wrote:
Although I do not recommend focusing of the zoneplate every time you
Thanks for the replies re P30. I had looked in the on-line catalogues but not
in the hard copy. Calumet says there's no extra shipping charge as long it is
shipped by ground. Which 85 filter is best? And is the paper ca ISO 6, like
BW? I've made a camera which will yield a close to 180 degree
Guillermo wrote:
Although I do not recommend focusing of the zoneplate every time you make an
exposure, I do recommend you focus it ONCE so you find out (if you wish) the
actual focal length of it. To do it, aim your camera to a light source
(light bulb for instance) or well illuminated object
- Original Message -
From: TSHACK tsh...@silver-bayou.com
I congratulate you folks who can focus one of these things through the
viewfinder. I pulled out my Crown Graphic, slapped on the reflex viewer,
tried focusing on a light source, tried focusing on a subject outside, and
I
A zone plate focusses like a lens so you should adjust the focus for
objects at different distances. On the other hand, they tend to have
large f numbers (like f/32) so they have large depth of field. They
are
also hard to focus because they are so dim.
I congratulate you
On Sun, 28 Oct 2001 12:17:33 EST, tricks...@aol.com wrote:
Is Agfa discontinuing all it's films including Agfapan 100 and 400?
They discontinued just the Agfapan 25. The 100 and 400 are still being
produced.
Dieter
--
Dieter's Lochkamera Seite: http://www.bingo-ev.de/~db106/
On Mon, 29 Oct 2001 08:51:29 +0100, Peter Wiklund
peter.wikl...@journalistgruppen.se wrote:
So I'd like to know if there are any of you who have produced catalogs or
books, that aren't spread through the normal channels (I have every pinhole
book that can be bought from Pinhole Resource, Amazon
For those of you interested in the fixer on the negative before development
info here is a letter (I finally found it). I received from Nancy
Renner:
To make the photographs, I put my negatives in a water bath for one
minute, pour out the water, then pour used but not exhausted fixer
- Original Message -
From: Richard M. Koolish kool...@bbn.com
A zone plate focusses like a lens so you should adjust the focus for
objects at different distances. On the other hand, they tend to have
large f numbers (like f/32) so they have large depth of field. They
are
Hi all,
As we approach the end of 2001, plans are already underway for next year's
pinhole day. The 2nd annual Worldwide Pinhole Photography Day will be held
on April 28, 2002.
The coordinating team for WPPD2 consists of Guy Glorieux, Jean Daubas, Edward
Levinson, Zernike Au, Rosanne
I think technically they should be refocused (anyone, please correct me if
I'm wrong).but in practical terms my experience is, they needn't be. Try
simply setting it to it's designed focal length and shootingIMHO little
out of focus softness is often a plus.
Mike
In a
so i went to the photographica show at waltham (massachusetts) high school
this morning. bought a bunch of stuff.. a polaroid land camera, a couple
cable releases, some developing tanks and reels, a viewmaster(tm), etc. i
also bought a manual 35mm SLR for my girlfriend. bought some film.
Check out this link to hear Sally talk about her process. The first link is
to Art21. The second is a direct link to the SM program.
http://www.pbs.org/art21/index.html
http://www.pbs.org/art21/artists/mann/index.html
In a message dated 10/29/01 3:59:14 AM, peter.wikl...@journalistgruppen.se
writes:
So I'd like to know if there are any of you who have produced catalogs or
books, that aren't spread through the normal channels
I had a Pinhole Exhibition in a museum in Braunschweig, Germany in 1989 and
Michael,
I plan to try this film soon but for lens pictures.
About differences between Chimie II and Chimie IV, I understand that :
- Chimie Type II is reserved for ROTARY process and above all is adapted
for development at 38°C temperature. This is marketed as an advantage for
studio
Hello,
I'm continously trying to make my pinhole library larger - seeing the
collection of pinhole books makes me happy every day.
Almost like seeing my kids. (But only almost.)
So I'd like to know if there are any of you who have produced catalogs or
books, that aren't spread through the normal
If it needs to refocused, my hacked TLR job is not going to work. I'll
either need an SLR, or my Crown Graphic. I hope not.
We'll see what happens.
Tonight I took my Zero Image 6x9, gripped it in place on the top of my car
by closing the moonroof on it, then drove around in traffic. I'll see
28 matches
Mail list logo
