mherger wrote:
> > Iâm not sure I understand why this is so bad. If someone uses an
> older
> > version of LMS, theyâll just get the behavior theyâve been getting
> for
> > years, which is functionally correct, even if it consumes extra space
> > and time.
>
> You're right of course, it
Somehow I posted the wrong link. Hopefully this one makes more sense.
https://github.com/librespot-org/librespot/pull/573
You mention in there that you successfully tested this. How did you test?
___
plugins mailing list
plugins@lists.slimdevices.com
I’m not sure I understand why this is so bad. If someone uses an older
version of LMS, they’ll just get the behavior they’ve been getting for
years, which is functionally correct, even if it consumes extra space
and time.
You're right of course, it wouldn't hurt the plugin.
Independently of
MarSOnEarth wrote:
>
>
> Timing seems to be the culprit and the Achilles' heel of the
> implementation in every hiccup the plugin exhibits I ever encounered ;-)
> Yet, my AVR is hard-wired over 500Mbps power-line adapter with low
> latency..
Temporarily replace powerline adapter via long
SamY wrote:
> Hey David. I have a question. Now that you know to back up your plugin
> files in a safe place when beta testing :), I wonder if you would be
> interested in testing some changes I've been working on with regard to
> secondary zone support. Before I move on to the next coding
DavidBulluss wrote:
> Yep, the next time I was replacing the files with the beta ones I saved
> them elsewhere as a backup :-)
Hey David. I have a question. Now that you know to back up your plugin
files in a safe place when beta testing :), I wonder if you would be
interested in testing some
SamY wrote:
> Interesting. The first thing that sticks out to me is that the Z2?
> command, which is the first command issued by the plugin during "power
> on" processing to check the status of Zone 2, is consistently taking
> ~1.7 seconds to respond. The timeout interval for that command was 1
SamY wrote:
> Oops! Not sure what happened there, David. Maybe the plugin was updated
> during that time but, if that were the case, it should have overlaid the
> new files too. I guess the safest thing to do is to copy the old files
> somewhere else. If you ever need to go back to an older
DavidBulluss wrote:
> Interesting that you suggested to rename the old files. That was also
> what I did before placing the new files into the folder on the
> assumption they would still be there if I needed to revert. Next time I
> looked the renamed files had disappeared!
>
> Cheers, David
MarSOnEarth wrote:
> Thanks, and glad to do it. Two server logs; they are both of just power
> on/off commands from my desktop (W10P, FF w/ Material UI), though I also
> use Material app on Android (10) phone. The second (+net) log also
> includes debug from network.asynchttp. Hope you find it
DavidBulluss wrote:
> Interesting that you suggested to rename the old files. That was also
> what I did before placing the new files into the folder on the
> assumption they would still be there if I needed to revert. Next time I
> looked the renamed files had disappeared!
>
> Cheers, David
mherger wrote:
>
> That would be a great solution. Alas: it would require a major change in
>
> LMS. And I can't expect everybody to be using the latest and greatest
> dev version, just to use this plugin.
Hi Michael,
Im not sure I understand why this is so bad. If someone uses an older
SamY wrote:
> Copy them into your DenonAvpControl plugin directory after renaming
> the old ones and then restart LMS.
Interesting that you suggested to rename the old files. That was also
what I did before placing the new files into the folder on the
assumption they would still be there if
mherger wrote:
> >> which version of picoreplayer are you using?
> >
> > v3.2
>
> Time to get an update. We're at v7 now...
Lms/touch/pcp damn sure isnt a set it and forget it ecosystem
bb1959's Profile:
bb1959 wrote:
> Sorry, dont see Set Branch
this is the old way way to update lms on pcp
1.Access piCorePlayer via sshsee How-to access piCoreplayer via
ssh.
2.$ cd /tmp
3.$ wget
https://raw.githubusercontent.com/piCorePlayer/lms-update-script/Master/lms-update.sh
4.$
which version of picoreplayer are you using?
v3.2
Time to get an update. We're at v7 now...
___
plugins mailing list
plugins@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/plugins
reinholdk wrote:
> which version of picoreplayer are you using?
v3.2
bb1959's Profile: http://forums.slimdevices.com/member.php?userid=24793
View this thread: http://forums.slimdevices.com/showthread.php?t=111923
Just FYI, it's running on Win 7 x86 server with that version of 8.2.
Apesbrain's Profile: http://forums.slimdevices.com/member.php?userid=738
View this thread: http://forums.slimdevices.com/showthread.php?t=113604
Since many such clients use the artist id in paths like
"imageproxy/mai/artist/artist_id/image.png" as well as elsewhere, I
suspect that what we really want is for the artist id (which I presume
is generated by LMS rather than MAI) to be stable.
That would be a great solution. Alas: it would
bb1959 wrote:
> Sorry, dont see Set Branch
which version of piCorePlayer are you using?
reinholdk's Profile: http://forums.slimdevices.com/member.php?userid=36070
View this thread:
MichaelPr wrote:
> Hi Andrew,
>
> because of remove icon mapping in MaterialSkin, I became aware of your
> plugin - using TVHeadEnd and LMS since many years now I added my DVB-C
> Radio channels manually to favorites like:
>
Paul Webster wrote:
> You can still run Spotty on 7.9.2 but you will not see the integration.
> It is in the same place as I mentioned earlier.
>
> To get 8 in pCP you have to tell pCP that you want to move off the
> Release version and get the Stable or Development version.
> It is on the LMS
SamY wrote:
> All I can tell you is that the line numbers in the debug log correspond
> to v2.1 and not v2.3 so that's a mystery to me.
I had a trouble updating the plugin from v2.1 (the update kept looping),
so maybe that's when things got out of sync.
SamY wrote:
> In any case, if you would
PasTim wrote:
> What are you trying to do? If you just want to get erland's plugins on
> LMS 8, tick the box at the very bottom of the plugins screen (Use
> unsupported extensions) , Apply, and you should see the most recent
> versions in 3rd party plugins.
Thanks, I wasn't aware those plugins
xrad wrote:
>
> I guess for now I'll take Erlands repo on github but I might be a good
> idea to resolve this somehow. Likewise, please do let me know if I'm all
> wrong here.
The built-in repository works works, so dont add any extra
repositories.
Ive no longer time to maintain or verify my
I've been thinking along similar lines. What I'd really like is a rotary
controller than can be configured as HID device in the same way FLIRC
does for IR.
You could then assign any keyboard shortcut to it such as kill alarm
in my head I'd then build a TouchPI latest gen case with a speaker
mherger wrote:
> > Thanks for releasing this, Michael. Iâm seeing artist picture scan
> as 40
> > times as fast as the previous version and 4x as fast as the patch I
> > wrote :)
>
> Well... unfortunately this joy didn't last long: turns out the new
> method not only caused some issues, but
"Alexa ask mediaserver to stop playback" :)
(https://forums.slimdevices.com/showthread.php?111016-Announce-MediaServer-*certified*-Alexa-skill-for-LMS)
chill's Profile:
mps wrote:
> As a workaround, I have gotten in the habit of modifying any SQL that
> uses the multilibrary id to use the name and then do a join on
> multilibrary_libraries to get the id. I admit it's really ugly, but I
> don't really mind doing this because using names is more robust than
>
I appreciate your work on this but it does not work on the latest
nightly for me. Is it not compatible with LMS 8.2?
+---+
|Filename: Selection_003.png|
|Download:
PasTim wrote:
> Thanks. Beyond my skills these days I'm afraid, but the problem is so
> rare for me that the inconvenience if it does happen is not too bad :)
As a workaround, I have gotten in the habit of modifying any SQL that
uses the multilibrary id to use the name and then do a join on
MarSOnEarth wrote:
> Just checked, the 'install.xml' does say 2.3; so, I'm good there.
All I can tell you is that the line numbers in the debug log correspond
to v2.1 and not v2.3 so that's a mystery to me.
In any case, if you would feel comfortable doing it, I would like you to
try running
xrad wrote:
> Sorry in advance for possibly stupid question.
>
> I just stumbled across this 'announcement'
> (https://plugins.slimdevices.narkive.com/vM8vLISA/slimdevices-plugins-announce-erlands-commercial-plugins-available-for-free)
> which states that the now free plugins are available in
I'm testing the alarm feature. Setup: a Bluetooth speaker registered as
another player, synched with a Raspberry Pi with touchscreen running
piCore and Jivelite against an LMS 8.0.0.
I set up an alarm on the raspi and it does trigger the way I configured,
making the bluetooth speaker emit the
ralphy wrote:
> Based on the contributions of several forum members, including myself,
> in the 'Community Radio Firmware project thread'
> (https://forums.slimdevices.com/showthread.php?111663-Community-Build-Radio-Firmware),
> I have built updated firmware for the Radio, Touch and Controller.
You can still run Spotty on 7.9.2 but you will not see the integration.
It is in the same place as I mentioned earlier.
To get 8 in pCP you have to tell pCP that you want to move off the
Release version and get the Stable or Development version.
It is on the LMS page - Set Branch ... if you are
Paul Webster wrote:
> Assuming you are running LMS 8 ...
> Settings/Plugins/3rd party plugins/Spotty
I've manually tried to update lms...says it's updating but still at
7.9.2
bb1959's Profile:
Paul Webster wrote:
> Assuming you are running LMS 8 ...
> Settings/Plugins/3rd party plugins/Spotty
7.9.2 that's the problem...thanks! However when I update LMS from
picoreplayer it says no update available...
Cheers, the players are Radio, touch, Picore and DAC32.
I couldn't see any errors in the log, just more of the above.
I'll have a proper play with this tomorrow - I'm off for my jab..
TimM's Profile:
bpa wrote:
> Remember these can be patched/built for LMS which means it is possible
> that (i) LMS specific stuff added, (ii) some functionality disabled (ii)
> some old version feature are enabled (iii) some features added from
> later version (iv) special build options chosen.
Also, at some
mherger wrote:
> > The request to add a choice of album or track gain has been added to
> > librespot as detailed here
> > https://github.com/librespot-org/librespot/pull/573#ref-commit-71acb79
> > Would it be easy to update Spotty to include this?
>
> I don't know/doubt it. First of all I'll
bb1959 wrote:
> I cannot find plug in...any ideas?
Assuming you are running LMS 8 ...
Settings/Plugins/3rd party plugins/Spotty
Paul Webster
http://dabdig.blogspot.com
author of \"now playing\" plugins covering radio france (fip etc), kcrw,
supla finland, abc australia, cbc/radio-canada and
TimM wrote:
> Hi - I'm coming late to this plugin, is there anything else I need to
> configure as it does everything apart from produce sound. The progress
> bar appears to be moving, but no sound on live streams.
>
> The log looks a lot like this
>
> [21-03-17 11:24:22.9546]
mherger wrote:
> I'm happy to announce Spotty v4.0.0. This release adds support for the
> new online library integration of Logitech Media Server 8.0 (pre-release
> only!). This integration will list your favourite albums and artists
> from Spotify (and other supported streaming services)
Hi - I'm coming late to this plugin, is there anything else I need to
configure as it does everything apart from produce sound. The progress
bar appears to be moving, but no sound on live streams.
The log looks a lot like this
[21-03-17 11:24:22.9546]
Thanks for releasing this, Michael. I’m seeing artist picture scan as 40
times as fast as the previous version and 4x as fast as the patch I
wrote :)
Well... unfortunately this joy didn't last long: turns out the new
method not only caused some issues, but it's not working as expected
with
Wow... yep. Seeing it on my production system too!
Maybe I found a rule.
Every artist with a whitespace in the name is not showing, but artists
Another great catch! I indeed did not URI escape the path, which
Jivelite/SqueezePlay don't like.
___
mherger wrote:
> > The request to add a choice of album or track gain has been added to
> > librespot as detailed here
> > https://github.com/librespot-org/librespot/pull/573#ref-commit-71acb79
> > Would it be easy to update Spotty to include this?
>
> I don't know/doubt it. First of all I'll
kidstypike wrote:
> Seeing similar.
>
> All artists that are just a single word "ABBA", "Anjani" are showing
> artwork.
>
> Artists that are a single word preceded by "The", "The Animals", "The
> Bangles" are showing artwork.
>
> "The Barr Brothers", etc., not showing artwork.
Yes, same
Is it possible in Jivelite to have artwork with, for example in my case,
the indication that the album is from Spotify or the artist has a
Spotify album in your collection...as we have in LMS Web interface
and Material Skin?
carsten_h wrote:
> Maybe I found a rule.
> Every artist with a whitespace in the name is not showing, but artists
> with "The" in front of the name eg. "The Stranglers" are shown. But
> artists with "The" and extra whitespace like "The Style Council" are not
> showing.
>
> Maybe this helps!
Hi Michael,
I've been using an older Spotty for years but this weekend I built a new
TrueNAS 12 box (to replace my older FreeNAS 9.x / LMS 8.0 / Spotty 2.0)
and setup a FreeBSD Jail with LMS 8.1.2, Spotty 4.4.8 and the Spotty
Helper for FreeBSD 11 (I'm running FreeBSD 12.2 but it worked) and
mherger wrote:
> Seeing it on my production system too!
One more thing.
It takes really long before the pictures are shown which looks like
waiting for a timeout or something like that.
It seems that there is no jivelite logfile where I can look.
pi4 4gb picoreplayer with lms and
mherger wrote:
> Wow... yep. Seeing it on my production system too!
Maybe I found a rule.
Every artist with a whitespace in the name is not showing, but artists
with "The" in front of the name eg. "The Stranglers" are shown. But
artists with "The" and extra whitespace like "The Style Council"
I completely forgot to give feedback.
Turned out it was a firmware issue on my wlan access point that had a
bug. After downgrading AP Firmware, all is good !
(ubiquity UniFi AP AC PRO).
/macsat
macsat wrote:
> Yes - I am om IOS14
>
> I have tried several apps from the iphone - all gives the
carsten_h wrote:
> Thank you. I can wait!
+1 :D Thanks.
gegen's Profile: http://forums.slimdevices.com/member.php?userid=41137
View this thread: http://forums.slimdevices.com/showthread.php?t=99537
mherger wrote:
> I'll fix this ASAP.
Thank you. I can wait!
pi4 4gb picoreplayer with lms and squeezelite for usb inside an argon
one case
pi3b+ (7\" display, hifiberry dac+ pro) picoreplayer with
squeezlite/jivelite for hifiberry and bluetooth headphone inside a
smartipi touch case
two
MichaelPr wrote:
> I'm not really sure at this point whether this is the best or the right
> way to go. SBT only shows the icon on Squeezer - but not on Jive /
> Jivelite devices. Also, I haven't seen this method in other plugins that
> show the icon everywhere - like Radio Paradise. Maybe
After this message I also looked at my Pi 3B+ with 7" display and
piCorePlayer installation (jivelite). I have to say that I have the same
problem! I can see no rule which artist appear and which not.
I deleted the artist picture database and did a complete rescan
yesterday.
Wow... yep. Seeing
mherger wrote:
> > After the update to v1.7.0 only about 25% of my artist images appear
> in
> > Artists on the Jivelite screen, (241 out of 951). No problems with
> album
> > coverart on the Jivelite screen.
>
> With the new version MAI is using different URIs for the images. If you
>
>
Sorry in advance for possibly stupid question.
I just stumbled across this 'announcement'
(https://plugins.slimdevices.narkive.com/vM8vLISA/slimdevices-plugins-announce-erlands-commercial-plugins-available-for-free)
which states that the now free plugins are available in 'this 3rd party
repo'
gegen wrote:
> After the update to v1.7.0 only about 25% of my artist images appear in
> Artists on the Jivelite screen, (241 out of 951). No problems with album
> coverart on the Jivelite screen.
Yesterday I only looked via Browser and Material Skin onto my LMS where
everything was fine.
Thanks for releasing this, Michael. Im seeing artist picture scan as 40
times as fast as the previous version and 4x as fast as the patch I
wrote :)mherger wrote:
> I released v1.7.0:
>
> > > >
- Look up genre information for albums imported from online music
> services
- improve
MarSOnEarth wrote:
> Hmm. It shows 2.3 in the LMS plugin list. What to do?
Just checked, the 'install.xml' does say 2.3; so, I'm good there.
MarSOnEarth's Profile: http://forums.slimdevices.com/member.php?userid=69826
SamY wrote:
> Hi Mars. First of all, from the log it appears that you are running v2.1
> of the plugin. Please upgrade to v2.3.
Hmm. It shows 2.3 in the LMS plugin list. What to do?
SamY wrote:
> You are correct in observing that the power on command is not being
> sent. That is because the
65 matches
Mail list logo