29.08.2011 11:24, ashwanik wrote:
http://pastebin.com/Dww5GMZi
This log is useless. It doesn't contain the jitter and latency line
produced by module-test, because you forgot to wait 30 seconds for it to
test your devices. Try again.
And I want to see the jitter and latency not only for
27.08.2011 19:27, ashwanik wrote:
Please find pulseaudio -v and pacmd load-module module-test
latency_time=20 test_time=3 log link tested with usb mic.
http://pastebin.com/aTk6JNvX
This paste does not exist or has expired. Please resubmit and tell the
pastebin to never expire your paste.
Hi Pierre,
On Fri, Aug 26, 2011 at 9:34 PM, Pierre-Louis Bossart
pierre-louis.boss...@linux.intel.com wrote:
Works for me for usb-hdaudio loopback. i get a latency 40ms
See log at http://pastebin.com/jWC57PcT
I have seen your log. I think you are working on desktop system.
On Saturday 27 August 2011 12:30 AM,
pulseaudio-discuss-requ...@lists.freedesktop.org wrote:
Re: Need help to reduce delay with USB, mic using pulseaudio
Hi Bossart,
Please find pulseaudio -v and pacmd load-module module-test
latency_time=20 test_time=3 log link tested with usb mic.
On Thu, Aug 25, 2011 at 9:37 PM, Colin Guthrie gm...@colin.guthr.ie wrote:
'Twas brillig, and Alexander E. Patrakov at 25/08/11 16:41 did gyre and
gimble:
25.08.2011 15:59, ABDUL MOIZ wrote:
We have tried with the below command
$ pactl load-module module-loopback
Hi,
On Wed, Aug 24, 2011 at 11:11 PM, Pierre-Louis Bossart
pierre-louis.boss...@linux.intel.com wrote:
3) In the latency reported by module-loopback.c, the second number
(i.e.
the internal jitter buffer) dominates, both in USB = same USB and USB
= onboard audio cases:
25.08.2011 15:59, ABDUL MOIZ wrote:
We have tried with the below command
$ pactl load-module module-loopback latency_msec=20
But still delay problem is there. (we have also tried with
latency_msec=10,30,40,100)
you can find the attached log file
The
12.08.2011 15:50, Arun Raghavan wrote:
On Fri, 2011-08-12 at 14:58 +0530, ashwanik wrote:
Hi Arun,
Yes, When I use tsched=0 in default.pa, getting low delay but the audio
quality is not good as compared to the previous audio(audio with delay).
I am getting audio with noise(I think extra noise
3) In the latency reported by module-loopback.c, the second number
(i.e.
the internal jitter buffer) dominates, both in USB = same USB and USB
= onboard audio cases: 63.91+733.32+11.65 ms
So, for me, it looks like the USB master clock (from which the USB
audio
clock is derived) is too
On Fri, 2011-08-12 at 12:26 +0530, ashwanik wrote:
[...]
I changed buffer-time and latency-time for different values in
gst-pieline but no success. It reduces delay very less amount i.e delay
is still there
(2-2.5 sec).
When I use alsasrc and alsasink with the same usb mic getting no
___
pulseaudio-discuss mailing list
pulseaudio-discuss@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
Hi Arun,
Yes, When I use tsched=0 in default.pa, getting low delay but the audio
quality is not good as compared to the previous audio(audio with delay).
I am getting audio with noise(I think extra noise sample added with
audio). I have tried with kernel Version: 2.6.35 2.6.38, in both case
I am attaching the pulseaudio usb mic delay log.
When I am running gst-launch-0.10 ! pulsesrc ! pulsesink on pandaboard
getting around 2-3 sec. on the fly audio delay.
Please suggest how to resolve this problem.
Use module-loopback and play with the latency parameters.
Hi Ashwani,
On Thu, Aug 11, 2011 at 11:02:41PM +0800, Pierre-Louis Bossart wrote:
I am attaching the pulseaudio usb mic delay log.
When I am running gst-launch-0.10 ! pulsesrc ! pulsesink on pandaboard
getting around 2-3 sec. on the fly audio delay.
Please suggest how to resolve this
'Twas brillig, and Lu Guanqun at 11/08/11 17:20 did gyre and gimble:
Hi Ashwani,
On Thu, Aug 11, 2011 at 11:02:41PM +0800, Pierre-Louis Bossart wrote:
I am attaching the pulseaudio usb mic delay log.
When I am running gst-launch-0.10 ! pulsesrc ! pulsesink on pandaboard
getting around 2-3
On Fri, Aug 12, 2011 at 12:07:18AM +0800, Colin Guthrie wrote:
'Twas brillig, and Lu Guanqun at 11/08/11 17:20 did gyre and gimble:
Hi Ashwani,
On Thu, Aug 11, 2011 at 11:02:41PM +0800, Pierre-Louis Bossart wrote:
I am attaching the pulseaudio usb mic delay log.
When I am running
Use module-loopback and play with the latency parameters.
In case you don't know what the latency parameters are, on the
gst-launch line, you can append these parameters: e.g.
gst-launch-0.10 pulsesrc buffer-time= latency-time= !
pulsesink buffer-time= latency-time=
17 matches
Mail list logo