, you could have the
speakers bound to seats using the hubs' bus-ids or similar.
Cheers
--
Michał Sawicz mic...@sawicz.net
signature.asc
Description: This is a digitally signed message part
___
pulseaudio-discuss mailing list
pulseaudio-discuss@mail
Dnia 2011-03-20, nie o godzinie 19:38 +0800, Ng Oon-Ee pisze:
OT: I'd call watching District 9 and Master and Commander relaxing,
wouldn't you? =p
ReOT: No, watching District 9 was torture. :P
--
Michał Sawicz mic...@sawicz.net
signature.asc
Description: This is a digitally signed message
, which are set by paprefs in gconf.
Cheers
--
Michał Sawicz mic...@sawicz.net
signature.asc
Description: This is a digitally signed message part
___
pulseaudio-discuss mailing list
pulseaudio-discuss@mail.0pointer.de
https://tango.0pointer.de/mailman
with the provided preferences.
Cheers
--
Michał Sawicz mic...@sawicz.net
signature.asc
Description: This is a digitally signed message part
___
pulseaudio-discuss mailing list
pulseaudio-discuss@mail.0pointer.de
https://tango.0pointer.de/mailman/listinfo
Forwarding to keep pulseaudio-discuss in the loop.
Dnia 2011-03-01, wto o godzinie 15:23 +0200, Dimitris Glezos pisze:
On Mon, Feb 28, 2011 at 2:45 PM, Michał Sawicz mic...@sawicz.net wrote:
Dimitris, you talked to Lennart some time ago about retrieving a list of
changes that could
you will also need to use ALSA:spdif output and enable pass
through.
[1]
https://tango.0pointer.de/pipermail/pulseaudio-discuss/2010-October/thread.html
--
Michał Sawicz mic...@sawicz.net
signature.asc
Description: This is a digitally signed message part
.
--
Michał Sawicz mic...@sawicz.net
signature.asc
Description: This is a digitally signed message part
___
pulseaudio-discuss mailing list
pulseaudio-discuss@mail.0pointer.de
https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
--
Michał Sawicz mic...@sawicz.net
signature.asc
Description: This is a digitally signed message part
___
pulseaudio-discuss mailing list
pulseaudio-discuss@mail.0pointer.de
https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
Dnia 2010-07-15, czw o godzinie 12:27 +0300, Tanu Kaskinen pisze:
I'm not sure what you mean by Sound Preferences, but it's probably
gnome-volume-control, and AFAIK you should be able to switch the card
profile with that. I don't know how, though. Debian doesn't enable
pulseaudio by default,
Dnia 2010-06-18, pią o godzinie 13:07 +0200, Maarten Bosmans pisze:
ping
Maaaybe you could use two module-null-sinks you'd module-remap-sink to
and make module-rtp-send read from their monitors?
--
Michał Sawicz mic...@sawicz.net
signature.asc
Description: This is a digitally signed message
Dnia 2010-05-10, pon o godzinie 09:30 -0500, Richard Shaw pisze:
Is it possible route a source directly to a sink completely within PA
without affecting other sources?
Check out module-loopback:
http://www.pulseaudio.org/wiki/Modules#module-loopback
--
Cheers
Michał (Saviq) Sawicz
Dnia 2010-03-20, sob o godzinie 09:27 +1100, Brendon Costa pisze:
Is there any documentation or sample source for developers wanting to
use the pulseaudio Async API for their applications (apart from the
doxygen API documentation)?
I have been using the doxygen generated documentation, but
Dnia 2010-02-17, śro o godzinie 17:35 -0700, Jeremy Nickurak pisze:
What I'd really like is for the pulseaudio server at B to show the
sinks/sources from A, so I could just select A's sound device as the
fallback (although since it's the only device, even that wouldn't be
neccesary.) This
Dnia 2010-02-15, pon o godzinie 16:38 +, Colin Guthrie pisze:
But that wont be needed if the bug is fixed. The GDM volume will
ultimately always be fixed at initial volume set by alsa on first
boot, and all new user volumes will be based from this.
What you describe is not really
Dnia 2010-02-10, śro o godzinie 16:45 -0700, Andrew McNabb pisze:
I'm not arguing that it's practical to do, but an ideal multiseat
system
would be able to give each user two dedicated channels, so they can
each
plug in their own set of headphones (modern surround sound cards have
tons of
Dnia 2010-02-09, wto o godzinie 19:31 +, Colin Guthrie pisze:
I wouldn't call this overdesign. Quite the opposite. Yes to get this
rather bizarre scenario working it would be complex, but to make it
work
out of the box in this way in PA itself is far from simple. I've
already
listed the
Dnia 2010-01-08, pią o godzinie 14:44 +1300, Jason Taylor pisze:
I also know apps should set this per stream.. but most do not, yet!
The whole idea of roles is that the app needs to set this, no point in
remembering it.
--
Cheers
Michał (Saviq) Sawicz
signature.asc
Description: To jest
Dnia 2009-12-23, śro o godzinie 16:08 -0600, Matt Zagrabelny pisze:
What I would like to be able to do is toggle between the local sound
card and the network sink. I looked at PA Dev Chooser, but that
doesn't
seem to show what I would expect as far as choosing the sink.
Don't use
Dnia 2009-12-22, wto o godzinie 16:47 -0500, Vadim Peretokin pisze:
Not always. It'll randomly forget what goes where. Takes me a moment
of confusion after making sure sound isn't muted to realize...
Maybe it's because of per-stream default? For example, if you've
manually moved a stream (== an
Dnia 2009-12-22, wto o godzinie 17:06 -0500, Vadim Peretokin pisze:
The thing is that I never move them back. I'm always moving them to my
USB headset.
What PA version is that? Also, IIRC fallback only works for new streams,
so if you have something playing and connect the USB headset, it won't
Dnia 2009-12-12, sob o godzinie 20:22 +0100, Vegard Vesterheim pisze:
I know how to use pavucontrol to move streams between sound cards.
You can have only one 'pulse' device and then move the streams around.
Once you moved a stream from one output to another, it will play through
it every time
Dnia 2009-12-12, sob o godzinie 15:58 -0500, Brian J. Murrell pisze:
Which is fine for single audio stream applications, but as OP
mentioned,
his app has two different reasons to want audio. One for the
telephone
ring which he wants on speakers and one for voice audio which he
wants
a
Dnia 2009-11-29, nie o godzinie 09:13 +0100, Aurelien Bompard pisze:
That's what I tried to do. But it looks like the udev-autodetect
module
prevents adding something else by hand. It is the case ?
It shouldn't, try using pacmd on a running instance, adding a
module-alsa-sink. And if that
Dnia 2009-11-29, nie o godzinie 11:38 +0100, Aurelien Bompard pisze:
Any idea where this could come from ? If I can help in any way, please
tell.
Try adding a ctl.upmixer device as a slave of pcm.default. Something
that pulse can actually control the volume of. I think that might help,
udev has
Dnia 2009-11-29, nie o godzinie 12:18 +0100, Aurelien Bompard pisze:
When I play a movie with mplayer -ao alsa:device=atdesk movie.avi I
get
this message :
alsa-lib: pcm_hw.c:607:(snd_pcm_hw_start) SNDRV_PCM_IOCTL_START
failed: File
descriptor in bad state
but the sound is allright.
Dnia 2009-11-28, sob o godzinie 09:29 +0100, Aurelien Bompard pisze:
It does work, but I have to manually choose the alsa output and the atdesk
driver in mplayer, since and it does not integrate nicely with pulseaudio,
etc.
My dream setup would be to have a profile in pavucontrol's
Dnia 2009-11-28, sob o godzinie 22:28 +0100, Aurelien Bompard pisze:
I did try that, but couldn't get it to work with the SPDIF output
(stereo -
AC3 conversion) and udev autodetection. I also tried without udev
autodetection but didn't find a way to get it to work properly.
I guess I'll
one root window - thus only one
default sink to be set through pax11publish?
--
Michał Sawicz mic...@sawicz.net
___
pulseaudio-discuss mailing list
pulseaudio-discuss@mail.0pointer.de
https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
Dnia 2009-10-19, pon o godzinie 19:47 +0200, rem...@gmail.com pisze:
No prob, apology accepted ;)
I can understand people who don't like changes in their OS at all
and I think every one of us knowks at least one guy/girl that freaks
out if some desktop-icons have been moved ;)
Well I can
... Their... ekhm... solution was to check
if PA is running and suspend it...
What's worse, in the upcoming 0.22 MythTV version, they've decided to
enforce that behavior and as far as I know Myth won't run if it's unable
to suspend PA...
No further comment...
--
Michał Sawicz mic...@sawicz.net
for that
so the problem might be occuring somewhere in the ALSA - pulse plugin,
probably due to bad usage on Myth's part.
--
Michał Sawicz mic...@sawicz.net
___
pulseaudio-discuss mailing list
pulseaudio-discuss@mail.0pointer.de
https://tango.0pointer.de
it was already
asked on the Bluez mailing list - go look there.
Cheers
--
Michał Sawicz mic...@sawicz.net
___
pulseaudio-discuss mailing list
pulseaudio-discuss@mail.0pointer.de
https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
-click on your sink input of choice and move it to another
sink.
Cheers
--
Michał Sawicz mic...@sawicz.net
___
pulseaudio-discuss mailing list
pulseaudio-discuss@mail.0pointer.de
https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
.
--
Michał Sawicz mic...@sawicz.net
___
pulseaudio-discuss mailing list
pulseaudio-discuss@mail.0pointer.de
https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
to play on two or more sinks see
module-combine.
You can read all about these on Pulseaudio wiki:
http://www.pulseaudio.org/wiki/Modules#module-combine
http://www.pulseaudio.org/wiki/CLI
--
Michał Sawicz mic...@sawicz.net
___
pulseaudio-discuss
--
Michał Sawicz mic...@sawicz.net
___
pulseaudio-discuss mailing list
pulseaudio-discuss@mail.0pointer.de
https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
connecting
any source to any number of sinks in a nice drag'n'drop manner :)
--
Michał Sawicz mic...@sawicz.net
___
pulseaudio-discuss mailing list
pulseaudio-discuss@mail.0pointer.de
https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
plugin
to have XawTV play through Pulseaudio.
--
Michał Sawicz mic...@sawicz.net
___
pulseaudio-discuss mailing list
pulseaudio-discuss@mail.0pointer.de
https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
on the
lower right of 'Input Devices', select one that contains monitors and
make it the default by clicking 'Default' in the dropdown menu of the
source.
--
Michał Sawicz mic...@sawicz.net
___
pulseaudio-discuss mailing list
pulseaudio-discuss@mail
Dnia 2009-06-08, pon o godzinie 15:03 +0800, Zheng, Huan pisze:
The attachment is the patch for volume ramping. Please review.
Have you seen 'EarCandy'? It essentially does what you've implemented
here, but with a gui configurator and some more nifty features.
--
Michał Sawicz mic
Dnia 2009-06-08, pon o godzinie 14:26 +0200, Michał Sawicz pisze:
Have you seen 'EarCandy'? It essentially does what you've implemented
here, but with a gui configurator and some more nifty features.
Read here https://launchpad.net/earcandy
--
Michał Sawicz mic...@sawicz.net
Dnia 2009-05-26, wto o godzinie 12:15 +1200, Jason Taylor pisze:
Thats seems a bit hacky... there is no other way to rest all streams ?
Hacky? I've seen hackier... And I don't know other ways to do that.
--
Michał Sawicz mic...@sawicz.net
..
As in remembered volumes? Just remove the relevant file (look for
stream-volumes) from your ~/.pulse directory.
--
Michał Sawicz mic...@sawicz.net
___
pulseaudio-discuss mailing list
pulseaudio-discuss@mail.0pointer.de
https://tango.0pointer.de/mailman/listinfo
Dnia 2009-05-05, wto o godzinie 20:00 +0200, Markus Feldmann pisze:
How to get the name of my master sink ?
Start pacmd, issue 'list-sinks'.
--
Michał Sawicz mic...@sawicz.net
___
pulseaudio-discuss mailing list
pulseaudio-discuss@mail.0pointer.de
/bluez/[bluetoothd
pidname]/hci0/dev_[your_headset's_MAC]/Audio
That should make it possible to change the profile.
--
Michał Sawicz mic...@sawicz.net
___
pulseaudio-discuss mailing list
pulseaudio-discuss@mail.0pointer.de
https://tango.0pointer.de/mailman
laptop play at 130% because I found
AC3 sound downmixed to stereo a lot quieter than standard stereo and
having all mixers at 100% didn't help, the sound was just a bit too low
- and it didn't clip after amplifying, either.
--
Michał Sawicz mic...@sawicz.net
Dnia 2009-04-21, wto o godzinie 18:00 +0400, Victor Porton pisze:
At http://pulseaudio.org/ticket/551 there are no comment
link/button. So I can't comment there.
Log in to Trac, you'll be able to comment.
--
Michał Sawicz mic...@sawicz.net
Dnia 2009-04-18, sob o godzinie 08:12 +0200, Erik Boritsch pisze:
Unless gnome-bluetooth does matter that much, I'm completely puzzled.
Hope you
can give me some directions.
What about module-bluetooth-discover? Do you have it loaded?
--
Michał Sawicz mic...@sawicz.net
for playback.
Read here http://www.pulseaudio.org/wiki/Modules#module-combine
--
Michał Sawicz mic...@sawicz.net
___
pulseaudio-discuss mailing list
pulseaudio-discuss@mail.0pointer.de
https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
49 matches
Mail list logo