While using keywords (-t bios,...) would be possible, depending on the server it also bloats the report with uninteresting information, hiding the relevant. Therefore the non-grouped, specific number types are used.
Where we only need specific information, not serial numbers etc., we print the information from /sys/... which is the same source that dmidecode uses per default. New output includes: # cat /sys/devices/virtual/dmi/id/sys_vendor HP # cat /sys/devices/virtual/dmi/id/product_name ProLiant·DL380p·Gen8 # cat /sys/devices/virtual/dmi/id/product_version Not·specified # cat /sys/devices/virtual/dmi/id/board_vendor ASUSTeK·COMPUTER·INC. # cat /sys/devices/virtual/dmi/id/board_name Z13PP-D32·Series # cat /sys/devices/virtual/dmi/id/board_version 60SB09M0-SB0G11 `-t 0`: (like the previous "BIOS" output, but without "BIOS Language" block) `-t 3`: Chassis Information Manufacturer: HP Type: Rack Mount Chassis Boot-up State: Critical Power Supply State: Critical Thermal State: Safe Number Of Power Cords: 2 (...) and `-t 32`: System Boot Information Status: Firmware-detected hardware failure which can hint to Proxmox-independant issues, debug-able via IPMI. Signed-off-by: Alexander Zeidler <a.zeid...@proxmox.com> --- v3: * as discussed also off-list, switch to `cat` for board and product output to avoid complexity v2: https://lists.proxmox.com/pipermail/pve-devel/2024-April/063284.html * reformat and extend board output * add product output * adapt dmidecode output v1: https://lists.proxmox.com/pipermail/pve-devel/2024-March/062350.html PVE/Report.pm | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/PVE/Report.pm b/PVE/Report.pm index 1ed91c8e..73f14744 100644 --- a/PVE/Report.pm +++ b/PVE/Report.pm @@ -110,7 +110,13 @@ my $init_report_cmds = sub { hardware => { order => 70, cmds => [ - 'dmidecode -t bios', + 'cat /sys/devices/virtual/dmi/id/sys_vendor', + 'cat /sys/devices/virtual/dmi/id/product_name', + 'cat /sys/devices/virtual/dmi/id/product_version', + 'cat /sys/devices/virtual/dmi/id/board_vendor', + 'cat /sys/devices/virtual/dmi/id/board_name', + 'cat /sys/devices/virtual/dmi/id/board_version', + 'dmidecode -t 0,3,32', 'lspci -nnk', ], }, -- 2.39.2 _______________________________________________ pve-devel mailing list pve-devel@lists.proxmox.com https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel