Hello,
I use Linux and the Saillard.org pwc latest version as
stated on your site. I use qAstrocam and AstroStack
both for Linux. I found however that my stacked
images were coming out with horizontal and vertical
lines, more pronounced around the inner borders of say
a stacked picture of
FYI
I used to use my ToUcam with xawtv, but now use
qAstroCam - it has a lot more functionality.
--- Luc Saillard [EMAIL PROTECTED] wrote:
Hi,
After severall month of coding and helping some
others projects (like ekiga
thanks damien for the software), a new release[1]
will be made next
I'd hightly recommend if you are using Xawtv for
astrophoto use with your webcam, that you try
qAstrocam. I used to use Xawtv, but qAstrocam has
more options needed.
--- Hugo Mercier [EMAIL PROTECTED] wrote:
On Wed, 24 May 2006 17:22:37 +0200 (CEST)
Gabriel Huecas Fernandez-Toribio
[EMAIL
I believe ./media/pwc/ is where the stock kernel put
it, and ./media/ is where you put the new one (and
delete the stock one from ./media/pwc/.
Works for me with 10.0.11 pwc Saillard version on RHEL
v3.
Peter
--- Ian [EMAIL PROTECTED] wrote:
I noticed with the latest kernel for FC5 that
Correction, on RHEL v4.
--- Peter Baitz [EMAIL PROTECTED] wrote:
I believe ./media/pwc/ is where the stock kernel put
it, and ./media/ is where you put the new one (and
delete the stock one from ./media/pwc/.
Works for me with 10.0.11 pwc Saillard version on
RHEL
v3.
Peter
Hello,
I am using pwc-10.0.12-rc1 on RHEL WSv4 using SPC900NC
(ToUcam Pro III) and I find that the LED light stays
on all the time. Is the power to this LED light
supplied via function from the PWC driver? Does the
PWC driver supply the ability to shut it off and turn
on the LED? Or is this
please consider adding LED
on/off function to the SPC900NC support?
I would most appreciate if you posted a reply - so far
I heard nothing, which is a little saddening.
Very Sincerely,
Peter B.
--- Peter Baitz [EMAIL PROTECTED] wrote:
Hello,
I am using pwc-10.0.12-rc1 on RHEL WSv4
: LEF blink
Peter Baitz
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
___
pwc mailing list
pwc@lists.saillard.org
http://lists.saillard.org
to
install the kernel devel as per:
apt-get install kernel-devel
I did it, but it was before I changed Your
suggestion.
I havent tried it after, as I uninstalled the devel
due to it at this
point wasn't the culprit.
Peter Baitz wrote:
Did you apply this fix before compiling
--- Peter Baitz [EMAIL PROTECTED] wrote:
Erik,
Your make and make install looks good below.
Now run this
find /lib/modules/2.6.9-42.cc-i686/ -name pwc.ko
where you ought to see similar to mine (for the
kernel
you are running 'uname -a'):
The new pwc driver
/lib/modules/2.6.9-42
As a suggestion for the SPC900NC, not too long ago the
pwc driver would set this webcam typedef to 720, and
this caused some issues. In recent pwc driver
releases (daily snapshots) it has been adjusted to
typedef 740.
This might help to update your driver and double-check
the typedef (see
Hello,
I am now using Fedora Core6 kernel
2.6.18-1.2798.fc6-i586 and the pwc.ko which comes with
it is only 95kb approx. no where near the 640kb size
of previous pwc compiles I have done. How can this be
the same pwc driver?
I am also getting this error if I try to compile it on
FC6 (and I made
diff.
Peter
--- Peter Baitz [EMAIL PROTECTED] wrote:
Hello,
I am now using Fedora Core6 kernel
2.6.18-1.2798.fc6-i586 and the pwc.ko which comes
with
it is only 95kb approx. no where near the 640kb size
of previous pwc compiles I have done. How can this
be
the same pwc driver?
I am
] wrote:
On Sun, 5 Nov 2006, Peter Baitz wrote:
Actually you can also do modinfo pwc and it
tells
the developer and version (Saillard.org and
10.0.12),
but what I still do not understand is that when I
compile pwc as I previously did, the pwc.ko is
over
600kb while the stock pwc.ko even
The new FC6 kernel source/tree no longer has a
linux/config.h file in it, so you can do one of
two things. Either comment the line in the code
referencing config.h, or change directory to the
kernel directory location and finally under
linux/ directory do a 'touch config.h' and that
should fix
Erik,
You will want to do two things to begin with:
(1) install gcc - preferably using the rpm or depot or
otherwise for your Linux distro.
(2) I see you attempted to install PWC 10.0.11
which is the previous version. 10.0.12 is the newer
one, and in fact I only use the latest SNAPSHOT
Hello Luc,
Are you still maintaining the pwc driver? Will you post anymore snapshots
updated to compile on latest Linux distros ?
Unfortunately the pwc driver that comes with Fedora 14 and 15 broke long
exposure mods (over USB port LED control) through qastrocam and qastrocam-g2
which uses
17 matches
Mail list logo
