Signed-off-by: Jordan Justen jordan.l.jus...@intel.com
---
hw/pc_piix.c | 12 ++--
1 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/hw/pc_piix.c b/hw/pc_piix.c
index 2fc4211..fcf0153 100644
--- a/hw/pc_piix.c
+++ b/hw/pc_piix.c
@@ -371,8 +371,8 @@ static void
On 02/21/2012 07:33 PM, Peter Maydell wrote:
Short summary:
* switch wp groups to bitfield rather than int array
* convert sd.c to use memory_region_init_ram() to allocate the wp groups
(being careful to use memory_region_set_dirty() when we touch them)
* we don't need variable-length
Trying to install the virtio-win-0.1-22.iso balloon driver on Windows
2008R2:
E:\Wlh\amd64x:\microsoft\WinDDK\7600.16385.win7_wdk.100208-1538\tools\devcon\amd64\devcon.exe
install BALLOON.inf PCI\VEN_1AF4DEV_1002SUBSYS_00051AF4REV_00
Device node created. Install is complete when drivers are
Flash can be enabled by calling pc_system_firmware_init
with the system_flash_enabled parameter being non-zero.
If system_flash_enabled is zero, then the older qemu
rom creation method will be used.
If flash is enabled and a pflash image is found, then
it is used for the system firmware image.
On 22 February 2012 06:58, Evgeny Voevodin e.voevo...@samsung.com wrote:
These patches add -uboot option to ARM boards.
To let user load u-boot, board should initialize
.uboot_start in arm_boot_info struct.
Added utilisation of -uboot for exynos4 and integratorcp.
Nack. This kind of thing
I have now reproduced the same segfault without the controlling script
by running qemu on the command line and connecting to it with lftp. To
reproduce the fault it appears to be necessary to attempt to connect to
the guest before it is fully booted and ready to accept connections; if
I let it
Signed-off-by: Jordan Justen jordan.l.jus...@intel.com
---
Makefile.target |1 +
hw/pc.c | 56 +++--
hw/pc.h |3 ++
hw/pc_sysfw.c | 92 +++
4 files changed, 101 insertions(+), 51
Signed-off-by: Jordan Justen jordan.l.jus...@intel.com
---
hw/pflash_cfi01.c | 44 +++-
hw/pflash_cfi02.c | 83
2 files changed, 75 insertions(+), 52 deletions(-)
diff --git a/hw/pflash_cfi01.c b/hw/pflash_cfi01.c
Setup a pc-sysfw device type. It contains a single
property of 'rom_only' which is defaulted to enabled.
Signed-off-by: Jordan Justen jordan.l.jus...@intel.com
---
hw/pc_sysfw.c | 37 +
1 files changed, 37 insertions(+), 0 deletions(-)
diff --git
Enable flash emulation in a PC system using pflash_cfi01.
v11:
* Convert pc-sysfw to qdev
- Add rom_only property
* Remove KVM flash support to remove the need for using
bdrv_read during machine initialization. KVM should
now continue to use the same 'rom' initialization
sequence that it
On 22.02.2012 12:12, Peter Maydell wrote:
On 22 February 2012 06:58, Evgeny Voevodine.voevo...@samsung.com wrote:
These patches add -uboot option to ARM boards.
To let user load u-boot, board should initialize
.uboot_start in arm_boot_info struct.
Added utilisation of -uboot for exynos4 and
On 22 February 2012 08:29, Evgeny Voevodin e.voevo...@samsung.com wrote:
On 22.02.2012 12:12, Peter Maydell wrote:
Nack. This kind of thing should be done by making QEMU
load an ELF file which has u-boot in it (which at the
moment you can do with -kernel). Loading Linux kernels
is a special
On Wed, Feb 22, 2012 at 6:16 AM, Zhi Hui Li zhihu...@linux.vnet.ibm.com wrote:
1: explain the difference between :
type_register_static(isa_fdc_info);
type_register_static(sysbus_fdc_info);
type_register_static(sun4m_fdc_info);
The floppy disk controller is used by several different
Am 22.02.2012 08:27, schrieb Paolo Bonzini:
On 02/22/2012 03:07 AM, 陳韋任 wrote:
-HELPERS-$(CONFIG_LINUX) = qemu-bridge-helper$(EXESUF)
+HELPERS-$(CONFIG_LINUX) : config-host.h qemu-bridge-helper$(EXESUF)
This is not declaring the dependency, it is declaring a target.
The rule should be
regression introduced by 075360945860ad9bdd491921954b383bf762b0e5,
Reported-by: Fabiano Fidêncio fabi...@fidencio.org
Signed-off-by: Alon Levy al...@redhat.com
---
Thanks for the report, this fixes the problem for me, the problem with
reverting the commit you proposed is that it would
Hello,
For listing registered CPU classes I needed a way to sort classes in a
custom (i.e., non-hashtable) order. I found it easiest to sort the classes
using the existing foreach infrastructure, on the go via GLib's binary tree.
Patch is still missing documentation, but do you think this is the
This functions allows to walk the classes in a custom order rather than
in hashtable order.
Signed-off-by: Andreas Färber afaer...@suse.de
Cc: Anthony Liguori anth...@codemonkey.ws
Cc: Peter Maydell peter.mayd...@linaro.org
---
include/qemu/object.h |6 ++
qom/object.c | 43
regression introduced by 075360945860ad9bdd491921954b383bf762b0e5,
v2: lock around qemu_spice_cursor_refresh_unlocked
Reported-by: Fabiano Fidêncio fabi...@fidencio.org
Signed-off-by: Alon Levy al...@redhat.com
---
hw/qxl.c |4
ui/spice-display.c | 23
Am 22.02.2012 02:11, schrieb David Gibson:
On Tue, Feb 21, 2012 at 10:09:01AM +0100, Kevin Wolf wrote:
Am 21.02.2012 09:35, schrieb Paolo Bonzini:
On 02/20/2012 11:50 AM, Alexander Graf wrote:
DMAAIOCB *dbs = qemu_aio_get(dma_aio_pool, bs, cb, opaque);
-trace_dma_bdrv_io(dbs, bs,
On 02/22/2012 10:54 AM, Andreas Färber wrote:
Am 22.02.2012 02:11, schrieb David Gibson:
On Tue, Feb 21, 2012 at 10:09:01AM +0100, Kevin Wolf wrote:
Am 21.02.2012 09:35, schrieb Paolo Bonzini:
On 02/20/2012 11:50 AM, Alexander Graf wrote:
DMAAIOCB *dbs = qemu_aio_get(dma_aio_pool, bs, cb,
Convert variables descr, src and dest from type target_phys_addr_t to uint32_t,
use VMSTATE_UINT32 instead of VMSTATE_UINTTL for these variables.
We can do it safely because:
1) pxa2xx has 32-bit physical address;
2) rest of the code in this file treats these variables as uint32_t;
3) we shouldn't
This patchset cleans up and optimizes vmstate implementation.
Patch 1 is a trivial bug fixing.
Patches 2 and 3 replaces target_phys_addr_t in pxa implementation
to uint32_t.
Patch 4 moves VMSTATE_UINTTL from hw.h to vmstate.h. Explicit dependency
on NEED_CPU_H is droped, I failed to understand
Convert three variables in DMAChannel state from type target_phys_addr_t to
uint32_t,
use VMSTATE_UINT32 instead of VMSTATE_UINTTL for these variables.
We can do it safely because:
1) pxa2xx has 32-bit physical address;
2) rest of the code in this file treats these variables as uint32_t;
3) we
New get_bufsize field in VMStateField is supposed to help us easily add
save/restore
support of dynamically allocated buffers in device's states.
There are some cases when information about size of dynamically allocated
buffer is
already presented in specific device's state structure, but in
Instead of defining VMSTATE_UINTTL* based on TARGET_LONG_BITS value, we can
use qemu_put_betls/qemu_get_betls functions. These two functions depend on
TARGET_LONG_BITS as well, and this new approach for VMSTATE_UINTTL* will result
in the same thing as before (will call
Do not use VMSTATE_UINTTL* macro for variables that are actually defined as
uint64_t
in CPUAlphaState.
Signed-off-by: Igor Mitsyanko i.mitsya...@samsung.com
---
target-alpha/machine.c | 34 +-
1 files changed, 17 insertions(+), 17 deletions(-)
diff --git
Public bug reported:
When controlling a qemu instance from another program, it'd be very
useful to be able to have qemu inherit pseudo-tty file descriptors so
they could just be specified on the command line.
It's possible to allocate a pty pair in the master program before
forking and exec'ing
On 22 February 2012 10:15, Igor Mitsyanko i.mitsya...@samsung.com wrote:
Convert variables descr, src and dest from type target_phys_addr_t to
uint32_t,
use VMSTATE_UINT32 instead of VMSTATE_UINTTL for these variables.
We can do it safely because:
1) pxa2xx has 32-bit physical address;
2)
On 22 February 2012 10:15, Igor Mitsyanko i.mitsya...@samsung.com wrote:
Convert three variables in DMAChannel state from type target_phys_addr_t to
uint32_t,
use VMSTATE_UINT32 instead of VMSTATE_UINTTL for these variables.
We can do it safely because:
1) pxa2xx has 32-bit physical address;
On 02/21/12 22:39, Alon Levy wrote:
Using vga-screen_dump results in a number of calls to ppm_save,
instead of a single one.
Can you investigate why?
Lacking time to test all the possible users of
vga-screen_dump, avoid the redundant calls by doing the vga_hw_update+
ppm_save in
On 02/21/12 22:39, Alon Levy wrote:
drop all ifdefs on SPICE_INTERFACE_QXL_MINOR = 1 as a result,
0.8.2 has SPICE_INTERFACE_QXL_MINOR == 1.
Nice. I think there are a few more SPICE_SERVER_VERSION #ifdefs which
can be dropped too. Also SPICE_INTERFACE_CORE_MINOR ...
cheers,
Gerd
Hi,
It's not obvious to me how the non-flipped case (qxl_stride 0) is
handled now. Have you tested this with both windows+linux guests?
cheers,
Gerd
On 02/21/2012 01:00 AM, Zhang, Yang Z wrote:
Thanks, this looks much better! I'll run it through some tests.
We also should try to keep migration working from older versions using the
load_old callback.
Sure, I missed it. Will add it to the version 3.
Any other comments?
Here they
Looks plausible but cc'ing the Alpha maintainer...
-- PMM
On 22 February 2012 10:15, Igor Mitsyanko i.mitsya...@samsung.com wrote:
Do not use VMSTATE_UINTTL* macro for variables that are actually defined as
uint64_t
in CPUAlphaState.
Signed-off-by: Igor Mitsyanko i.mitsya...@samsung.com
On 02/21/12 22:39, Alon Levy wrote:
Will be used in the next patch.
Looks good, and is more readable without all the #ifdefs.
static void qxl_spice_flush_surfaces_async(PCIQXLDevice *qxl)
{
-spice_qxl_flush_surfaces_async(qxl-ssd.qxl, 0);
+ spice_qxl_flush_surfaces_async(qxl-ssd.qxl,
On 22 February 2012 10:15, Igor Mitsyanko i.mitsya...@samsung.com wrote:
This patchset cleans up and optimizes vmstate implementation.
Patch 1 is a trivial bug fixing.
Patches 2 and 3 replaces target_phys_addr_t in pxa implementation
to uint32_t.
Patch 4 moves VMSTATE_UINTTL from hw.h to
On 22 February 2012 11:15, Igor Mitsyanko i.mitsya...@samsung.com wrote:
Convert three variables in DMAChannel state from type target_phys_addr_t to
uint32_t,
use VMSTATE_UINT32 instead of VMSTATE_UINTTL for these variables.
We can do it safely because:
1) pxa2xx has 32-bit physical address;
Hi,
+qxl-render_update_redraw_area.left = 0;
+qxl-render_update_redraw_area.right =
+qxl-guest_primary.surface.width;
+qxl-render_update_redraw_area.top= 0;
+qxl-render_update_redraw_area.bottom =
+qxl-guest_primary.surface.height;
Are there cases
On 02/21/12 22:39, Alon Levy wrote:
This changes the behavior of the monitor command. After the previous
patch, there is no longer an option of deadlock with virt-manager, but
ppm_save is called too early, before the update has completed. With this
patch it is called at the correct moment, but
On 22 February 2012 11:36, andrzej zaborowski bal...@zabor.org wrote:
On 22 February 2012 11:15, Igor Mitsyanko i.mitsya...@samsung.com wrote:
Convert three variables in DMAChannel state from type target_phys_addr_t to
uint32_t,
use VMSTATE_UINT32 instead of VMSTATE_UINTTL for these
On 02/22/2012 03:26 PM, Peter Maydell wrote:
On 22 February 2012 10:15, Igor Mitsyankoi.mitsya...@samsung.com wrote:
This patchset cleans up and optimizes vmstate implementation.
Patch 1 is a trivial bug fixing.
Patches 2 and 3 replaces target_phys_addr_t in pxa implementation
to uint32_t.
On 22 February 2012 10:15, Igor Mitsyanko i.mitsya...@samsung.com wrote:
Patch 4 moves VMSTATE_UINTTL from hw.h to vmstate.h. Explicit dependency
on NEED_CPU_H is droped, I failed to understand why it was presented at all.
You need #ifdef NEED_CPU_H because in generic source files (where
Hi,
Isn't this something where it is easier to omit first and add later
once we have a use case, than to add up front only to find that no
one cares?
Yes. I'll drop it.
cheers,
Gerd
On 22 February 2012 13:00, Peter Maydell peter.mayd...@linaro.org wrote:
On 22 February 2012 11:36, andrzej zaborowski bal...@zabor.org wrote:
On 22 February 2012 11:15, Igor Mitsyanko i.mitsya...@samsung.com wrote:
Convert three variables in DMAChannel state from type target_phys_addr_t to
On Wed, Feb 22, 2012 at 12:10:08PM +0100, Gerd Hoffmann wrote:
On 02/21/12 22:39, Alon Levy wrote:
Using vga-screen_dump results in a number of calls to ppm_save,
instead of a single one.
Can you investigate why?
oh, I know why. vga_screen_dump implementation:
screen_dump_filename =
On 02/22/2012 03:36 PM, andrzej zaborowski wrote:
On 22 February 2012 11:15, Igor Mitsyankoi.mitsya...@samsung.com wrote:
Convert three variables in DMAChannel state from type target_phys_addr_t to
uint32_t,
use VMSTATE_UINT32 instead of VMSTATE_UINTTL for these variables.
We can do it safely
On Wed, Feb 22, 2012 at 12:18:50PM +0100, Gerd Hoffmann wrote:
Hi,
It's not obvious to me how the non-flipped case (qxl_stride 0) is
handled now. Have you tested this with both windows+linux guests?
It isn't handled. The simplest way is just to if on the stride and do a
single memcpy
On Wed, Feb 22, 2012 at 12:41:01PM +0100, Gerd Hoffmann wrote:
Hi,
+qxl-render_update_redraw_area.left = 0;
+qxl-render_update_redraw_area.right =
+qxl-guest_primary.surface.width;
+qxl-render_update_redraw_area.top= 0;
+
On Wed, Feb 22, 2012 at 12:46:28PM +0100, Gerd Hoffmann wrote:
On 02/21/12 22:39, Alon Levy wrote:
This changes the behavior of the monitor command. After the previous
patch, there is no longer an option of deadlock with virt-manager, but
ppm_save is called too early, before the update has
On Wed, Feb 22, 2012 at 12:46:28PM +0100, Gerd Hoffmann wrote:
On 02/21/12 22:39, Alon Levy wrote:
This changes the behavior of the monitor command. After the previous
patch, there is no longer an option of deadlock with virt-manager, but
ppm_save is called too early, before the update has
On 22 February 2012 12:13, andrzej zaborowski balr...@gmail.com wrote:
On 22 February 2012 13:00, Peter Maydell peter.mayd...@linaro.org wrote:
On 22 February 2012 11:36, andrzej zaborowski bal...@zabor.org wrote:
On 22 February 2012 11:15, Igor Mitsyanko i.mitsya...@samsung.com wrote:
Convert
On 22 February 2012 13:26, Mitsyanko Igor i.mitsya...@samsung.com wrote:
On 02/22/2012 03:36 PM, andrzej zaborowski wrote:
Why's uint32_t more correct though? The purpose of using a named type
across qemu is to mark fields as memory addresses (similar to size_t
being used for sizes, etc.),
Am 22.02.2012 12:26, schrieb Peter Maydell:
So if we apply patches 1-3 (which all look plausible) then the only
remaining user of VMSTATE_UINTTL is target-i386/machine.c as far as
I can see.
This leaves me wondering if we shouldn't just put it actually in
target-i386/machine.c as a
On 22 February 2012 12:49, Andreas Färber afaer...@suse.de wrote:
Am 22.02.2012 12:26, schrieb Peter Maydell:
So if we apply patches 1-3 (which all look plausible) then the only
remaining user of VMSTATE_UINTTL is target-i386/machine.c as far as
I can see.
This leaves me wondering if we
On 22 February 2012 13:48, Peter Maydell peter.mayd...@linaro.org wrote:
On 22 February 2012 12:13, andrzej zaborowski balr...@gmail.com wrote:
On 22 February 2012 13:00, Peter Maydell peter.mayd...@linaro.org wrote:
On 22 February 2012 11:36, andrzej zaborowski bal...@zabor.org wrote:
On 22
On Mon, 20 Feb 2012 09:28:15 +0100
Markus Armbruster arm...@redhat.com wrote:
Luiz Capitulino lcapitul...@redhat.com writes:
The event name changed, which caused the subject to change too, hope this
won't cause confusion.
v3
o Rename the event to DEVICE_TRAY_MOVED
o Rename the
On Fri, 17 Feb 2012 15:51:33 -0600
Michael Roth mdr...@linux.vnet.ibm.com wrote:
On Fri, Feb 17, 2012 at 03:16:22PM -0200, Luiz Capitulino wrote:
On Fri, 17 Feb 2012 10:55:41 -0600
Anthony Liguori aligu...@us.ibm.com wrote:
On 02/08/2012 02:30 PM, Luiz Capitulino wrote:
This commit
On Sat, 2012-02-04 at 11:08 +0900, Takuya Yoshikawa wrote:
The latter needs a fundamental change: I heard (from Avi) that we can
change mmu_lock to mutex_lock if mmu_notifier becomes preemptible.
So I was planning to restart this work when Peter's
mm: Preemptibility
On Tue, 21 Feb 2012 19:40:16 +0200
Alon Levy al...@redhat.com wrote:
On Tue, Feb 21, 2012 at 09:15:45AM -0700, Eric Blake wrote:
On 02/21/2012 01:19 AM, Alon Levy wrote:
(2) Async monitor command. Keeps interface and works nicely. A bunch
of QAPI bits tickled into master
Am 17.02.2012 20:21, schrieb Luiz Capitulino:
It's emitted whenever the tray is moved by the guest or by HMP/QMP
commands.
Signed-off-by: Luiz Capitulino lcapitul...@redhat.com
---
QMP/qmp-events.txt | 18 ++
block.c| 24
monitor.c
Am 22.02.2012 13:53, schrieb Luiz Capitulino:
On Mon, 20 Feb 2012 09:28:15 +0100
Markus Armbruster arm...@redhat.com wrote:
Luiz Capitulino lcapitul...@redhat.com writes:
The event name changed, which caused the subject to change too, hope this
won't cause confusion.
v3
o Rename the
On Wed, 22 Feb 2012 13:08:16 +0100
Gerd Hoffmann kra...@redhat.com wrote:
Hi,
Isn't this something where it is easier to omit first and add later
once we have a use case, than to add up front only to find that no
one cares?
Yes. I'll drop it.
Yes, I think it's better to drop it for
On Wed, Feb 22, 2012 at 11:17:17AM -0200, Luiz Capitulino wrote:
On Tue, 21 Feb 2012 19:40:16 +0200
Alon Levy al...@redhat.com wrote:
On Tue, Feb 21, 2012 at 09:15:45AM -0700, Eric Blake wrote:
On 02/21/2012 01:19 AM, Alon Levy wrote:
(2) Async monitor command. Keeps interface
On 02/22/2012 03:44 AM, Andreas Färber wrote:
Hello,
For listing registered CPU classes I needed a way to sort classes in a
custom (i.e., non-hashtable) order. I found it easiest to sort the classes
using the existing foreach infrastructure, on the go via GLib's binary tree.
Patch is still
On 02/22/2012 04:48 PM, andrzej zaborowski wrote:
On 22 February 2012 13:26, Mitsyanko Igori.mitsya...@samsung.com wrote:
On 02/22/2012 03:36 PM, andrzej zaborowski wrote:
Why's uint32_t more correct though? The purpose of using a named type
across qemu is to mark fields as memory addresses
On 02/22/2012 04:56 PM, andrzej zaborowski wrote:
On 22 February 2012 13:48, Peter Maydellpeter.mayd...@linaro.org wrote:
On 22 February 2012 12:13, andrzej zaborowskibalr...@gmail.com wrote:
On 22 February 2012 13:00, Peter Maydellpeter.mayd...@linaro.org wrote:
On 22 February 2012
Igor Mitsyanko i.mitsya...@samsung.com wrote:
Convert variables descr, src and dest from type target_phys_addr_t to
uint32_t,
use VMSTATE_UINT32 instead of VMSTATE_UINTTL for these variables.
We can do it safely because:
1) pxa2xx has 32-bit physical address;
2) rest of the code in this
On Wed, 22 Feb 2012 14:22:50 +0100
Alon Levy al...@redhat.com wrote:
On Wed, Feb 22, 2012 at 11:17:17AM -0200, Luiz Capitulino wrote:
On Tue, 21 Feb 2012 19:40:16 +0200
Alon Levy al...@redhat.com wrote:
On Tue, Feb 21, 2012 at 09:15:45AM -0700, Eric Blake wrote:
On 02/21/2012 01:19
Igor Mitsyanko i.mitsya...@samsung.com wrote:
Do not use VMSTATE_UINTTL* macro for variables that are actually defined as
uint64_t
in CPUAlphaState.
Old code is wrong (TM). I think that your changes are ok.
On 22 February 2012 13:47, Juan Quintela quint...@redhat.com wrote:
Igor Mitsyanko i.mitsya...@samsung.com wrote:
Convert variables descr, src and dest from type target_phys_addr_t to
uint32_t,
use VMSTATE_UINT32 instead of VMSTATE_UINTTL for these variables.
We can do it safely because:
1)
andrzej zaborowski balr...@gmail.com wrote:
On 22 February 2012 13:00, Peter Maydell peter.mayd...@linaro.org wrote:
On 22 February 2012 11:36, andrzej zaborowski bal...@zabor.org wrote:
On 22 February 2012 11:15, Igor Mitsyanko i.mitsya...@samsung.com wrote:
Convert three variables in
And the only user of screen_dump_filename is:
static void vga_save_dpy_update(DisplayState *ds,
int x, int y, int w, int h)
{
if (screen_dump_filename) {
ppm_save(screen_dump_filename, ds-surface);
upstream/master this here:
Igor Mitsyanko i.mitsya...@samsung.com wrote:
Instead of defining VMSTATE_UINTTL* based on TARGET_LONG_BITS value, we can
use qemu_put_betls/qemu_get_betls functions. These two functions depend on
TARGET_LONG_BITS as well, and this new approach for VMSTATE_UINTTL* will
result
in the same
Peter Maydell peter.mayd...@linaro.org wrote:
On 22 February 2012 10:15, Igor Mitsyanko i.mitsya...@samsung.com wrote:
This patchset cleans up and optimizes vmstate implementation.
Patch 1 is a trivial bug fixing.
Patches 2 and 3 replaces target_phys_addr_t in pxa implementation
to uint32_t.
Peter Maydell peter.mayd...@linaro.org wrote:
On 22 February 2012 13:47, Juan Quintela quint...@redhat.com wrote:
Igor Mitsyanko i.mitsya...@samsung.com wrote:
Convert variables descr, src and dest from type target_phys_addr_t
to uint32_t,
use VMSTATE_UINT32 instead of VMSTATE_UINTTL for
On 02/22/12 13:28, Alon Levy wrote:
On Wed, Feb 22, 2012 at 12:18:50PM +0100, Gerd Hoffmann wrote:
Hi,
It's not obvious to me how the non-flipped case (qxl_stride 0) is
handled now. Have you tested this with both windows+linux guests?
It isn't handled. The simplest way is just to if on
Hi,
Honestly, for this particular case, I'm not 100% sure that having an id is
_required_, as I don't expect a client to submit multiple screendump calls
in parallel and we don't officially support multiple QMP clients either.
Also, having the screendump filename in the event will serve as
On Wed, Feb 22, 2012 at 03:09:09PM +0100, Gerd Hoffmann wrote:
On 02/22/12 13:28, Alon Levy wrote:
On Wed, Feb 22, 2012 at 12:18:50PM +0100, Gerd Hoffmann wrote:
Hi,
It's not obvious to me how the non-flipped case (qxl_stride 0) is
handled now. Have you tested this with both
On Wed, Feb 22, 2012 at 02:58:10PM +0100, Gerd Hoffmann wrote:
And the only user of screen_dump_filename is:
static void vga_save_dpy_update(DisplayState *ds,
int x, int y, int w, int h)
{
if (screen_dump_filename) {
On Wed, Feb 22, 2012 at 11:49:27AM -0200, Luiz Capitulino wrote:
On Wed, 22 Feb 2012 14:22:50 +0100
Alon Levy al...@redhat.com wrote:
On Wed, Feb 22, 2012 at 11:17:17AM -0200, Luiz Capitulino wrote:
On Tue, 21 Feb 2012 19:40:16 +0200
Alon Levy al...@redhat.com wrote:
On Tue,
On Wed, Feb 22, 2012 at 03:22:11PM +0100, Gerd Hoffmann wrote:
Hi,
Honestly, for this particular case, I'm not 100% sure that having an id is
_required_, as I don't expect a client to submit multiple screendump calls
in parallel and we don't officially support multiple QMP clients
These helpers do a full transfer from an in-memory buffer to target
memory, with support for scatter/gather lists. It will be used to
store the reply of an emulated command into a QEMUSGList provided by
the adapter.
Signed-off-by: Paolo Bonzini pbonz...@redhat.com
---
dma-helpers.c | 31
On 02/20/2012 10:42 AM, Kevin Wolf wrote:
Am 16.02.2012 21:53, schrieb Christoph Hellwig:
On Thu, Feb 16, 2012 at 04:01:58PM +0100, Kevin Wolf wrote:
Hi Christoph,
I just talked to Stefan about our testing, both regarding the block
layer and qemu in general, and we came to the conclusion that
With the upcoming sglist support, HBAs will not see any transfer_data
call and will not have a way to detect short transfers. So pass the
residual amount of data upon command completion.
Signed-off-by: Paolo Bonzini pbonz...@redhat.com
---
hw/esp.c |3 ++-
hw/lsi53c895a.c |2 +-
Signed-off-by: Paolo Bonzini pbonz...@redhat.com
---
hw/scsi-bus.c |1 +
hw/scsi-disk.c | 63 ---
2 files changed, 51 insertions(+), 13 deletions(-)
diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c
index 0c471e0..dce6208 100644
---
From: Stefan Hajnoczi stefa...@linux.vnet.ibm.com
Add a useless virtio SCSI HBA device:
qemu -device virtio-scsi-pci
Signed-off-by: Stefan Hajnoczi stefa...@linux.vnet.ibm.com
Reviewed-by: Stefan Hajnoczi stefa...@linux.vnet.ibm.com
Signed-off-by: Paolo Bonzini pbonz...@redhat.com
---
Reviewed-by: Stefan Hajnoczi stefa...@linux.vnet.ibm.com
Signed-off-by: Paolo Bonzini pbonz...@redhat.com
---
hw/virtio-scsi.c | 50 +-
1 files changed, 49 insertions(+), 1 deletions(-)
diff --git a/hw/virtio-scsi.c b/hw/virtio-scsi.c
index
On 02/22/12 15:25, Alon Levy wrote:
On Wed, Feb 22, 2012 at 02:58:10PM +0100, Gerd Hoffmann wrote:
And the only user of screen_dump_filename is:
static void vga_save_dpy_update(DisplayState *ds,
int x, int y, int w, int h)
{
if (screen_dump_filename) {
On 02/21/2012 11:13 AM, Paolo Bonzini wrote:
Anthony,
I'm sending a pull request since you informally said on IRC that you're
okay with the patches.
The following changes since commit 99c7f87826337fa81f2f0f9baa9ca0a44faf90e9:
input: send kbd+mouse events only to running guests. (2012-02-17
On 02/21/2012 04:59 AM, Gerd Hoffmann wrote:
Hi,
Here is the spice patch queue with a collection of little improvements
and bugfixes. No major stuff. See individual patches for details.
Pulled. Thanks.
Regards,
Anthony Liguori
please pull,
Gerd
The following changes since commit
Hi,
I was thinking to add a new command since I'll want to add the id, and
if I'm already adding a new command I'll put in a display number too.
Big question is what the display number is supposed to be ...
cheers,
Gerd
Signed-off-by: Paolo Bonzini pbonz...@redhat.com
---
hw/scsi-disk.c | 59 ---
1 files changed, 55 insertions(+), 4 deletions(-)
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 2a24840..ec8e7cb 100644
--- a/hw/scsi-disk.c
+++
On 02/20/2012 11:31 AM, Jeff Cody wrote:
The QAPI scripts allow for generating commands that receive parameter
input consisting of a list of custom structs, but the QMP input paramter
checking did not support receiving a qlist as opposed to a qdict for input.
What are you trying to send on the
On Mon, 20 Feb 2012, Anthony PERARD wrote:
On Mon, Feb 20, 2012 at 19:58, Tobias Geiger tobias.gei...@vido.info wrote:
[00:06.0] pt_pci_read_config: address=0x0030 val=0x len=4
[00:06.0] pt_pci_write_config: address=0x0030 val=0x len=4
[00:06.0] pt_iomem_map: BAR 6,
Scatter/gather functionality uses the newly added DMA helpers. The
device can choose between doing DMA itself, or calling scsi_req_data
as usual, which will use the newly added DMA helpers to copy piecewise
to/from the destination area(s).
Signed-off-by: Paolo Bonzini pbonz...@redhat.com
---
3: or give me some introduce of FDC.
http://en.wikipedia.org/wiki/Floppy_disk_controller
HTH,
chenwj
--
Wei-Ren Chen (陳韋任)
Computer Systems Lab, Institute of Information Science,
Academia Sinica, Taiwan (R.O.C.)
Tel:886-2-2788-3799 #1667
Homepage: http://people.cs.nctu.edu.tw/~chenwj
2: explain the struct of FDCtrl;
In order to know what those fields in FDCtrl mean, you might need to read
ftp://download.intel.com/design/archives/periphrl/docs/29047504.pdf first.
As the comment in hw/fdc.c says, it's Intel 82078 floppy disk controller
emulation.
Regards,
chenwj
--
This has been the de facto situation for a while now.
Add a tree, too.
Signed-off-by: Paolo Bonzini pbonz...@redhat.com
---
MAINTAINERS |9 +++--
1 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 647c413..0b3b3d8 100644
--- a/MAINTAINERS
+++
On Wed, Feb 22, 2012 at 10:48:13AM -0200, Luiz Capitulino wrote:
On Fri, 17 Feb 2012 15:51:33 -0600
Michael Roth mdr...@linux.vnet.ibm.com wrote:
On Fri, Feb 17, 2012 at 03:16:22PM -0200, Luiz Capitulino wrote:
On Fri, 17 Feb 2012 10:55:41 -0600
Anthony Liguori aligu...@us.ibm.com
1 - 100 of 219 matches
Mail list logo