Does the current version of qeumu-0.9.0+??
allow the serail port output of no-graphic
boot option to be visible in the qemu window as is
possible under Linux?
-ishwar
This is a strange one. I just compiled and installed
4/29 snapshot of qemu (all files in /usr/local).
Before compilation:
$ which sdl-config
/usr/local/bin/sdl-config
$ ./configure
$ make
#make install
$ ldd /usr/local/bin/qemu
libSDL-1.2.so.0 = /usr/local/lib/libSDL-1.2.s0.0
dereference
tsk-{mm,active,mm}-context = 00c3
tsk-{mm, active,mm}-pgd = fc017000
Kernel panic -- not syncing; killing interrupt handler
-ishwar
On Fri, 27 Apr 2007, Stuart Brady wrote:
On Thu, Apr 26, 2007 at 08:24:28PM -0400, ISHWAR RATTAN wrote:
Has any one had success with this install
Has any one had success with this install? It seems to
fail all the time even with -nographic option (this worked
for 3.1r1)?
-ishwar
Trying to compile qemu on amd64 based Solaris.
I do not have write permission to /usr/local subtree
./configure --libdir=other-path --prefix=not-ustlocal
is fine
but make always generates binaries that want to find
/usr/local/lib/libSDL-1.2.so.0 etc. (checked with ldd).
What is the way out
On Fri, 13 Oct 2006, Martin Bochnig wrote:
Ishwar Rattan wrote:
Where is the problem 64bit versus 32bit ?
(32 bit version of libSDL-1.2.so.0 found while amd64 64bit version needed?)
(should go under /usr/local/lib/amd64/libSDL-1.2.so.0)
Well, the problem is I do not root privileges so
Is there a way to compile qemu-cvs-snapshot under Solaris-10 running
on amd64 processor?
-ishwar
___
Qemu-devel mailing list
Qemu-devel@nongnu.org
http://lists.nongnu.org/mailman/listinfo/qemu-devel
On Wed, 11 Oct 2006, Paul Brook wrote:
IMHO there's nothing particularly good about sparc for teaching assembly
(Whoever thought register windows were a good idea!).
The goal is not about assembly but programmer view of
a processor architecture using a mix of C and a little assembly.
Is it possible to boot the iso image
debian-31r3-sparc-netinst.iso
in qemu-system-sparc? What about other
Linux distributions?
-ishwar
___
Qemu-devel mailing list
Qemu-devel@nongnu.org
http://lists.nongnu.org/mailman/listinfo/qemu-devel
On Tue, 10 Oct 2006, WaxDragon wrote:
I've booted both aurora sparc linux 2.0-rcsomething and the last
sparc32 gentoo iso available (install-sparc-universal-2004.1.iso).
They both work to a certian point. There are still bugs to be fixed
/ uncovered.
Can you give some more information on
Well here is the situation. Dept had a lab with SPARC
based Solaris machines that were phased out in summer
(over my objections). I needed the environment to teach
first computer archt course with some assembly language
thrown in. Intel processor assembly requires a much
bigger effort (on part
What is the difference between qemu-sparc and qemu-system-sparc
generated during Qemu build under Linux on a i386 box?
-ishwar
___
Qemu-devel mailing list
Qemu-devel@nongnu.org
http://lists.nongnu.org/mailman/listinfo/qemu-devel
I saw the file src/hw/lance.c. Is it the driver for
amdlance NIC (as the one emulated in vmware)?
-ishwar
___
Qemu-devel mailing list
Qemu-devel@nongnu.org
http://lists.nongnu.org/mailman/listinfo/qemu-devel
These are new boxes in the lab. Hardware is
Opetron based Solaria box:
SunOS cps203 5.10 Generic_118855-14 i86pc i386 i86pc Solaris
Any idea how to compile qemu on this box. I tried configuration
and compilation but no success.
Any idea?
-ishwar
The command in qemu-source directory:
./configure --install=/usr/ucb/install
generates Makfile for i386 architecture. Is there a way
to force it to generate one for amd64?
-ishwar
On Thu, 10 Aug 2006, Ishwar Rattan wrote:
These are new boxes in the lab. Hardware is
Opetron based Solaria box
I failed to compile qemu-0.8.2 under Solaris on SPARC Sun-Blade-100 box.
[EMAIL PROTECTED]: qemu-0.8.2 $ uname -a
SunOS cps222 5.10 Generic_118833-03 sun4u sparc SUNW,Sun-Blade-100
[EMAIL PROTECTED]: qemu-0.8.2 $ gcc -v
Reading specs from
I am trying to use kqemu-1.3.0pre7 under few linux boxen
I works for some guests and not for others. Is there a list of guests
that work with -kernel-kqemu? (differences exist even for same kernel but
different distributions..) Is any one using it for Windows98 guest?
-ishwar
On a new Linux system: (Kanotix-lite)
I compiled and installed SDL-1.2.10
compiled and installed qemu-0.8.1
but invocation of qemu results in error message:
Couldn't Initialize SDL -- exiting
any ideas?
-ishwar
___
Qemu-devel mailing list
Any one has had success with this combination?
Also, anyone running any x86 version of Solaris
under qemu? I would like a copy of the disk-image
if possible.
-ishwar
___
Qemu-devel mailing list
Qemu-devel@nongnu.org
I was able to compile the qemu-cvs code with Taylor's
patches applied. I did not see a qemu executable? Is it
the same as qemu/aprc-softmmu/qemu-system-sparc? When
I try to use it it keeps complaining that it can't
load::
/usr/local/share/qemu/proll.elf: No such file or directory
qemu: could not
On Wed, 10 May 2006, Ben Taylor wrote:
Enclosed is a set of patches that allows qemu-0.8.1-cvs to be compiled on
Solaris 10
Sparc systems and run x86 software (tested DamnSmallLinux and Win98SE). I
will
Is thre a support for Sun-Blade-100 based system? I tried to compile
the 0.8.1
Syatme is Debian derivative, kernel version 2.6.15.1.
compiled k1qemu with gcc-4.0, compiles and insmods fine
compiled qemu with gcc-3.4, compiles, installs and runs
fine without -kernel-kqemu option
kernel panic with -kernel-kqemu option (guest slax,
host linux).
Is this a known issue?
-ishwar
-localtime)
System Kanotix-2005-4, kernel-2.6.15.1
gcc-4.0 used for kqemu anf gcc-3.4 used for qemu-8.8.1
-ishwar
On Thu, 4 May 2006, Ishwar Rattan wrote:
Syatme is Debian derivative, kernel version 2.6.15.1.
compiled k1qemu with gcc-4.0, compiles and insmods fine
compiled qemu with gcc-3.4, compiles
I recall (vaguely) that some one was able to
compile and run qemu under Solaris-10 on SPARC?
I would like to have the details too.
-ishwar
___
Qemu-devel mailing list
Qemu-devel@nongnu.org
http://lists.nongnu.org/mailman/listinfo/qemu-devel
The system is Kanotix-2005-4
Qemu-0.8.0
Vde-1.5.9
I setup the bridge and add interface tun0 to the bridge
(have done it before correctly)
but
/usr/bin/vdeqemu -hda disk-image -m256 -localtime -net vde -net
nic,macaddr=54:52:00:12:34:62
reports error:
qemu: invalid option -- '-tun-fd'
qemu
Has kqemu become obsolete with CVS version of qemu?
A ./configure followed by make, do not produce kqemu.ko
in the kqemu subdirectory.
-ishwar
___
Qemu-devel mailing list
Qemu-devel@nongnu.org
http://lists.nongnu.org/mailman/listinfo/qemu-devel
for a few hours and than resets network interface back to
DHCP address?
Any pointers to a solution for this annoying problem.
(How to make the 169.x address stick in guest OS).
-ishwar
On Mon, 23 Jan 2006, Paul Brook wrote:
On Monday 23 January 2006 20:17, Ishwar Rattan wrote:
vdeqemu -hda ./image1
I have Linux (Debian absed) system with
qemu-0.8.0 and vde-2.0.1 installed and running.
It comes out that vdeqemu does not pass the macaddress
info correctly to qemu:
vdeqemu -hda ./image1 -m 128
and
vdeqemu -hda ./image2 -m 128 -net nic,macaddr=54:42:00:12:34:57
end up having the same
I know that qemu emulates ne2000 compatible card but
which of the following version is it?
- NE2000 compatibel PCI
- NE2000 compatibel ISA
I am having ptoblems in networking part of QNX-6.2.1
under qemu-0.8.0. I can't make the system see the card.
-ishwar
Has there been a change in -user-net part
(other than -net user) for qemu-0.8.0?
I installed Minix-3.1.1 under qemu-0.7.2
and the network part of the install does
not work with qemu-0.8.0.
- qemu-0.7.2 (with -user-net option)
#ifconfig -a
/dev/ip: address 10.0.2.15 netmask 255.255.255.0 mtu
If more than one qemu instances are started (with same
different guest OS) on Linux with -user-net option
each gets ip-address 10.0.2.15 and only one of them (the
first one to come up) can acess Intenet. Has this issue
come up before? Is there a solution?
-ishwar
I just tried Minix-3.1.1 install on qemu-7.2 on a
Linux. I have had no success with getiing ether card
emulation to work. What are the attributes of this
device in terms of:
i/o_address:irq:mem-address
triple?
Any one got it working?
-ishwar
___
A points to note:
It is free software, doesn't work for you, do not use it.
-ishwar
On Mon, 13 Jun 2005 [EMAIL PROTECTED] wrote:
As near as I can tell, they haven't done a thing, and weren't the slightest
bit interested in the bug report.
___
Why would anyone want run an emulator in another emulator..
-ishwar
___
Qemu-devel mailing list
Qemu-devel@nongnu.org
http://lists.nongnu.org/mailman/listinfo/qemu-devel
On Sun, 29 May 2005, Juergen Bullinger wrote:
LD [M] /home/juergen/downloads/qemu/qemu-0.7.0/kqemu/kqemu.o
ld: Relocatable linking with relocations from format elf32-i386
(/home/juergen/downloads/qemu/qemu-0.7.0/kqemu/kqemu-mod.o) to format
elf64-x86-64
On Fri, 22 Apr 2005, Ben Taylor wrote:
Ishwar Rattan [EMAIL PROTECTED] wrote:
Finally got the qemu working under 2.6.10 kernel. Wtih
-user-net option ifconfig -a (linux guest too!) I can see
the interface assigned address 10.0.2.15. I can't ping it
from host side. Is there way
Finally got the qemu working under 2.6.10 kernel. Wtih
-user-net option ifconfig -a (linux guest too!) I can see
the interface assigned address 10.0.2.15. I can't ping it
from host side. Is there way to allow guest OS to have Internet
access?
-ishwar
37 matches
Mail list logo
