On 12/05/2013 08:41 PM, Stefan Weil wrote:
See https://bugs.launchpad.net/bugs/1258168
libcacard/vscclient.c: In function 'do_socket_read':
libcacard/vscclient.c:410: warning: implicit declaration of function
'g_warn_if_reached'
libcacard/vscclient.c:410: warning: nested extern declaration
I see the open of 2.0 development window, and rebase V8 with a small fix
v9:
use PC_Q35_1_8_MACHINE_OPTIONS in pc_q35_machine_v1_8
v8:
make piix/q35 compat diverge
simplify the code, use hpet_irqs to pass intcap value
Liu Ping Fan (2):
hpet: inverse polarity when pin above ISA_NUM_IRQS
According to hpet spec, hpet irq is high active. But according to
ICH spec, there is inversion before the input of ioapic. So the OS
will expect low active on this IRQ line. (On bare metal, if OS driver
claims high active on this line, spurious irq is generated)
We fold the emulation of this
Am 08.12.2013 10:13, schrieb Alon Levy:
On 12/05/2013 08:41 PM, Stefan Weil wrote:
See https://bugs.launchpad.net/bugs/1258168
libcacard/vscclient.c: In function 'do_socket_read':
libcacard/vscclient.c:410: warning: implicit declaration of function
'g_warn_if_reached'
On Thu, Nov 28, 2013 at 8:12 AM, Lluís Vilanova vilan...@ac.upc.edu wrote:
Xin Tong writes:
Hi LIuis
we can probably generate vector intrinsics using the tcg, e.g. add
support to
tcg to emit vector instructions directly in code cache
There was some discussion long ago about adding
On Thu, Dec 05, 2013 at 06:53:50PM +0100, Paolo Bonzini wrote:
Il 14/11/2013 11:37, Michael S. Tsirkin ha scritto:
Several changes that affect compatibility between 1.8 and 1.7 are
already planned, so we need pc compat structures in place.
Signed-off-by: Michael S. Tsirkin
On 11/28/2013 04:12 AM, Richard Henderson wrote:
2. why not use a TLB or bigger size? currently the TLB has 18 entries. the
TLB lookup is 10 x86 instructions , but every miss needs ~450 instructions, i
measured this using Intel PIN. so even the miss rate is low (say 3%) the
overall time spent
On Fri, Dec 06, 2013 at 12:24:40PM +0100, Gerd Hoffmann wrote:
qemu uses pci as name for pci bridges in the firmware device path.
seabios expects pci-bridge. Result is that bootorder is broken for
devices behind pci bridges.
Some googling suggests that pci-bridge is the correct one. At
On Fri, Dec 06, 2013 at 03:44:33PM +0100, Vincenzo Maffione wrote:
This patch extends the frontend-backend interface so that it is possible
to pass a new flag (QEMU_NET_PACKET_FLAG_MORE) when sending a packet to the
other peer. The new flag acts as a hint for the receiving peer, which can
On Thu, Sep 19, 2013 at 12:58:37PM -0700, Richard Henderson wrote:
We previously allocated 32-bits per temp for the next_free_temp entry.
We now allocate 4 bits per temp across the 4 bitmaps.
Using a linked list meant that if a translator is tweeked, resulting in
temps being freed in a
On Sat, Dec 07, 2013 at 02:52:34PM +1300, Richard Henderson wrote:
Using the new opcodes we can reduce if/else trees to
a single statement.
I committed this, thanks.
Edgar
Cc: Edgar E. Iglesias edgar.igles...@gmail.com
Signed-off-by: Richard Henderson r...@twiddle.net
---
One ugly workaround is, in case anyone needs it:
cp -a /usr/bin/qemu-arm-static /mnt/mychroot/
chroot /mnt/mychroot /qemu-arm-static /bin/sh
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1245703
** Changed in: qemu (Debian)
Status: Unknown = Confirmed
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1245703
Title:
LD_PREFIX option reads directories recursively in an endless loop
qemu-arm *and* qemu-arm-static 1.5.0+dfsg-3ubuntu5.1 (AMD64 13.10 host)
are affected by this.
Steps to reproduce:
0. mkdir /mnt/mychroot
1. qemu-debootstrap --arch=armhf wheezy /mnt/mychroot
http://ftp.debian.org/debian
2. qemu-arm-static -L /mnt/mychroot /mnt/mychroot/usr/sbin/chroot
This fix a segfault (that is caused by b3af018f3) of following command:
$ qemu-img convert some_img sheepdog:some_img
Cc: qemu-devel@nongnu.org
Cc: Kevin Wolf kw...@redhat.com
Cc: Stefan Hajnoczi stefa...@redhat.com
Signed-off-by: Liu Yuan namei.u...@gmail.com
---
block/sheepdog.c |8
The guest might want to be able to use the command key for its won
purposes (as command if it is MacOS X, or for the Windows key if
it is a PC guest, for instance). In line with other UI frontends,
pass it through if the guest has mousegrab, and only use it for
host UI menu accelerators if not
Bring a warning message into line with the others in this file by
sending it to stderr, not stdout, and fix a typo in it.
Signed-off-by: Peter Maydell peter.mayd...@linaro.org
---
ui/cocoa.m | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/ui/cocoa.m b/ui/cocoa.m
index
Fix a number of bugs in the code for starting QEMU via the image
file load dialog:
* use the actual argv[0] rather than qemu: this avoids failures to
find BIOS image files caused by not looking in the correct directory
relative to the executable path
* allocate a large enough argv array to
The guest might want to be able to use the command key for its won
purposes (as command if it is MacOS X, or for the Windows key if
it is a PC guest, for instance). In line with other UI frontends,
pass it through if the guest has mousegrab, and only use it for UI
menu accelerators if not grabbed.
This patchset is a collection of minor Cocoa UI patches:
* the 'pass command key through when mousegrabbed' patch I sent
earlier (included here for convenience since the others in
the series would otherwise trivially conflict)
* typo fixes
* support for loading *.qcow2 via the pick a disk
Add .qcow2 to the list of file extensions which are accepted
by the initial disk image load dialog which is displayed if the
user runs QEMU without any command line arguments.
Signed-off-by: Peter Maydell peter.mayd...@linaro.org
---
ui/cocoa.m | 2 +-
1 file changed, 1 insertion(+), 1
Fix various non-user-visible typos in comments and variable names.
Signed-off-by: Peter Maydell peter.mayd...@linaro.org
---
ui/cocoa.m | 28 ++--
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/ui/cocoa.m b/ui/cocoa.m
index d38cf22..f55747f 100644
---
Signed-off-by: liguang lig.f...@cn.fujitsu.com
---
default-configs/arm-softmmu.mak |1 +
hw/intc/Makefile.objs |1 +
hw/intc/allwinner-a10-pic.c | 217 +++
include/hw/intc/allwinner-a10-pic.h | 40 +++
4 files changed, 259
lay a foundation for allwinner A10 SoC with a cortex-a8
processor, and will add more devices later.
v2: split timer and interrupt controller emulation into
their corresponding files.
v3:
1. change loader_start address
2. add 64-bit counter
3. fixup fail to clear interrup status
Signed-off-by: liguang lig.f...@cn.fujitsu.com
---
include/migration/vmstate.h |4
savevm.c| 31 +++
2 files changed, 35 insertions(+), 0 deletions(-)
diff --git a/include/migration/vmstate.h b/include/migration/vmstate.h
index
Signed-off-by: liguang lig.f...@cn.fujitsu.com
---
default-configs/arm-softmmu.mak |1 +
hw/arm/Makefile.objs|1 +
hw/arm/allwinner-a10.c | 103 +++
include/hw/arm/allwinner-a10.h | 35 +
4 files changed, 140
Signed-off-by: liguang lig.f...@cn.fujitsu.com
---
default-configs/arm-softmmu.mak |2 +
hw/timer/Makefile.objs |2 +
hw/timer/allwinner-a10-pit.c | 254 ++
include/hw/timer/allwinner-a10-pit.h | 59
4 files changed,
Signed-off-by: liguang lig.f...@cn.fujitsu.com
---
hw/arm/Makefile.objs |2 +-
hw/arm/cubieboard.c | 69 ++
2 files changed, 70 insertions(+), 1 deletions(-)
create mode 100644 hw/arm/cubieboard.c
diff --git a/hw/arm/Makefile.objs
does the gtk3 mouse warping work for anyone else?
I've just been testing with gtk3 + virtio-vga and the mouse seems to
bounce around a lot off the edges of the window, but never make it
into it.
Dave.
On 27/11/13 6:15 PM, Brad Smith wrote:
This resolves the build issue with building the ROMs on OpenBSD on x86 archs.
As of OpenBSD 5.3 the compiler builds PIE binaries by default and thus the
whole OS/packages and so forth. The ROMs need to have PIE disabled. This
is my initial attempt at trying
hello, OK to merge?
convert -s snapshot.name=name1
Previous I planned to use -l for internal snapshot in all possible
program, since -s is taken as external snapshot in qemu, qemu-nbd.
let -s stands for internal in qemu-img convert only, may bring
confuse to user, so I deprecated it instead of enhance it(I
Please repost a proper v2.
Regards,
Anthony Liguori
On Sun, Dec 8, 2013 at 7:28 PM, Brad Smith b...@comstyle.com wrote:
On 27/11/13 6:15 PM, Brad Smith wrote:
This resolves the build issue with building the ROMs on OpenBSD on x86
archs.
As of OpenBSD 5.3 the compiler builds PIE binaries by
On Mon, Dec 9, 2013 at 10:49 AM, Dave Airlie airl...@gmail.com wrote:
does the gtk3 mouse warping work for anyone else?
I've just been testing with gtk3 + virtio-vga and the mouse seems to
bounce around a lot off the edges of the window, but never make it
into it.
It appears to be an issue
On Mon, Dec 9, 2013 at 1:54 PM, Dave Airlie airl...@gmail.com wrote:
On Mon, Dec 9, 2013 at 10:49 AM, Dave Airlie airl...@gmail.com wrote:
does the gtk3 mouse warping work for anyone else?
I've just been testing with gtk3 + virtio-vga and the mouse seems to
bounce around a lot off the edges
VMFS extent line in description file should be with 4 fields:
RW size VMFS file-name.vmdk
Check the number explicitly and report error if offset is appended as
FLAT, which should be invalid format.
Reported-by: Paolo Bonzini pbonz...@redhat.com
Signed-off-by: Fam Zheng f...@redhat.com
---
Hi, Igor
Igor Mammedov wrote:
Provide generic hotplug interface for devices.
Intended for replacing hotplug mechanism used by
PCI/PCIE/SHPC code.
Signed-off-by: Igor Mammedovimamm...@redhat.com
---
it's scsi-bus like interface, but abstracted from bus altogether
since all current users care
If mount a local file(disk) in two different dirctories, it is similar to the
network storage. Detecting identical files is still a problem.
Such as:
dd if=/dev/zero of=aa bs=1M count=10
mkfs.ext4 aa
Then mount aa to two directories.
mount aa /mnt/dir1
mount aa /mnt/dir2
# tune2fs -l aa
tune2fs
Does anyone have profiles on how much time QEMU spends in translating
instructions. QEMU does not have a baseline interpreter nor does it
translate on trace-granularity. so i imagine QEMU must spend quite a bit
of time translating instructions.
Is it possible for QEMU to obviate some of the
On So, 2013-12-08 at 13:31 +0200, Michael S. Tsirkin wrote:
On Fri, Dec 06, 2013 at 12:24:40PM +0100, Gerd Hoffmann wrote:
qemu uses pci as name for pci bridges in the firmware device path.
seabios expects pci-bridge. Result is that bootorder is broken for
devices behind pci bridges.
Hi everyone,
I am unable to figure-out when someone presses control-c on the keyboard,
how host OS routes it to QEMU and how QEMU then
routes it to the guest?
Please suggest me how can I extract complete control flow.
Thank You
--
Maryyam Muhammad Din
Al-Khawarizmi Institute of Computer Science
Maryyam Muhammad Din, le Mon 09 Dec 2013 12:25:23 +0500, a écrit :
I am unable to figure-out when someone presses control-c on the keyboard,
how host OS routes it to QEMU and how QEMU then
routes it to the guest?
It depends which QEMU UI you are using.
Please suggest me how can I extract
I have gone through the source code of QEMU but could not figure out how
external interrupts are handled by QEMU for guest. I have tried gdb and
print statements for debugging but there are no conclusive results. If
anyone have experience in debugging QEMU with gdb or any other tool please
guide
parsing of strict is wrongly removed, we need it.
The first patch fixes a typo.
Amos Kong (2):
fix a typo of strict option
add parsing of strict boot parameter
pc-bios/bios.bin | Bin 131072 - 131072 bytes
vl.c |3 ++-
2 files changed, 2 insertions(+), 1 deletions(-)
The type of strict should be bool.
Signed-off-by: Amos Kong ak...@redhat.com
---
vl.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/vl.c b/vl.c
index b0399de..12fe1f7 100644
--- a/vl.c
+++ b/vl.c
@@ -461,7 +461,7 @@ static QemuOptsList qemu_boot_opts = {
45 matches
Mail list logo