Hi Per,
or, possibly better still, in your boot file enter:
ERT HOT_RES1('M', 'win2_debug_C1M', 'g')
to put it on a hotkey (Shift + m, in this case)
Works perfectly, thanks a lot. Haven't struggled with guardians for a long
time ;-)).
So I have just caught the QDT error, which happens
- Original Message -
From: George Gwilt
Sent: Tuesday, January 31, 2006 7:03 PM
Subject: Re: [ql-users] QMon under QPC2 - SMSQ/E
I have found this too. Also if you start it by
QMON#2
say, and then type
G
the entire QPC2 screen goes black and you have crashed.
No, this works
Ok, so far, but why does QMon not work under SMSQ?
Cheers...Ralf R.
From: Marcel Kilgus
Sent: Tuesday, January 31, 2006 9:03 PM
Subject: Re: [ql-users] QMon under QPC2 - SMSQ/E
My unofficial releases sometimes include an inbuilt QMON, which is
normally completely disabled but might be
Hi Fabrizio,
About what Ralf mention is the same, no pop up when
critical error occurs.
Seems so. I remember, that Qmon works whithout problems on the last Atari
version of SMSQ/E I have used 10 years ago. Do not know, why it does not
work now. Maybe Marcel can explain 8-).
Cheers...Ralf R.
Hi Malcolm,
I also find it better to get *every* email. Better as get it rejected from
the ISP.
Cheers...Ralf R.
- Original Message -
From: Malcolm Cadman
Sent: Saturday, January 21, 2006 6:08 PM
Subject: Re: [ql-users] Dodgy Email
A good way of getting rid of spam if you are
Hi Geoff,
This raises the point that I raised in my last personal statement. Two
members of the present committee are retiring and unless Quanta gets new
blood on the committee - and there are only 10 nomination days left - then
it could be too small to be viable.
Seems to be the most
Again:
the guy, from where I have bought the controller and drive has sent an Eprom
hand-marked 5.3 to me and assumed, that this is the original MP Eprom. Is
this a possible version number?
Cheers...Ralf R.
___
QL-Users Mailing List
I have sent a patched copy of XChange to Dilwyn for his site and a copy will
also be sent to Erling Jacobsen for his site. I still have to enlarge the
readme_doc and to compile a complete package. I will do this in the next
days.
I have changed the version number from 3.90L to 3.90M to ensure,
Hi Marcel,
Actually I do hope they will be drawn onto the visible screen! Just at
the right place and in the right mode ;-)
Also, this will of course also work on Mode 16 (Aurora).
Yes, sorry, I have written it a bit misunderstandable.
RR: XChange Archive now ignores the number of lines
Hi Marcel,
- Original Message -
From: Marcel Kilgus
Sent: Tuesday, January 17, 2006 8:07 PM
Subject: Re: [ql-users] XChange v3.90M
Only if the number of lines is set to 0!
Plus, this is a mechanism in the generic printer driver code, it's not
Archive specific.
Ah, this was new to
- Original Message -
From: George Gwilt
Sent: Monday, January 16, 2006 6:20 PM
Subject: Re: [ql-users] Reverse engineering
Hmmm!! Apart from spending quite a lot of time disassembling
programs I also copy quite a lot of music. Perhaps I should be behind
bars instead of playing them
Hi Dilwyn,
I suspect (unless this doesn't work on Ralf's system) that he may have
seen the 'First day of week (0=sunday, 6=saturday)' prompt and not
realised he could enter any number in that range - 1 for monday, 2 for
tuesday and so on. Option 3 does not allow you to specify start day at
Hi Dilwyn,
you should remind, that the start of the week in Germany is at a monday. The
program just lets you choose sunday (as in USA) or saturday (??? don't know
where).
Cheers...Ralf R.
___
QL-Users Mailing List
Hi Phoebus,
in Germany, the week starts at Monday, and I believe, we are not the only
one. There is no difference between work and calendar week.
Cheers...Ralf R.
- Original Message -
From: Phoebus R. Dokos
Sent: Saturday, January 14, 2006 5:25 PM
Subject: Re: [ql-users] Calendar
Hi Phoebus,
There I found that per international standard Monday is the first day of
the week, however NOT for religious purposes. If you are a practicing
Christian or Jew theoretically at least your first day is Sunday. (Hence
why the name of Monday in Greek means Second)
but not for the US
Hi George,
I was prepared to use Archive, where FF works ok, but Marcel was so very
kind and corrected the bug in XChange.
Cheers...Ralf R.
BTW: There are a few other things, which were corrected in Archve 2.38,
still not corrected in XChange, but it is often the smallest thing,
which gave the
Hi Wolfgang,
seems to be the same problem as in the QL versions: If you want to load
flp1_test_a_prg on QL versions, you'll have to put an underscore in front
of it. flp1_test_prg works ok.
Cheers...Ralf R.
- Original Message -
From: Wolfgang Lenerz
Sent: Friday, January 13, 2006
Hi Derek,
I think, you may wish to do with Perfection, whatever you want, as long as
you do not pass it to others. Unfortunately (if I have understand it
correctly), Freddy DP Vachha does not wish anybody to enhance the program
(see Dylwyn's mail elsewhere here), just to bugfix it. Seriously,
: [ql-users] Problems with printing under XChange Archive
Ralf Reköndt wrote:
spoolon NUL
spooloff
This will create a file called NUL_lis. I know because my original
idea was just to say 'spoolon par1' before printing and spooloff
afterwards, but that created a file par1_lis
BTW: nothing dirctly concerned with the problem, but I have found an
interesting thing:
As I have written, I have tested my program with Archive v2.30 and that
worked. As this is a QL version, it writes the white menu border to
$2, so not visible under QPC as long as there is no QL_SCREMU. So
Hi Tony,
I remember this bug.
8-). Interesting to see, that now everybody seems to remember it.
However I always used multiple new lines instead of FF, with an empty
printer_dat. I did _all_ my printer config in the Archive programs.
Of course this works, but I find it a bit old-fashioned
Marcel Kilgus wrote:
No, good catch, I did the patch the wrong way round, instead of
updating the EXE to my new version it restored updated versions to
the original code! Ah well, it was late. Try downloading again.
Doesn't matter 8-), I'll download and try it this evening.
Cheers...Ralf R.
Hi Tony,
If there is a fix, then why not?
The major bug in the sH chip (uninitialised interrupts) has never
been cured by Microchip. The workaround is fine and works -
ditto archive.
Sorry, of course, you are right. Rest...see parallel mail
Cheers...Ralf R.
Hi George,
- Original Message -
From: George Gwilt
Sent: Wednesday, January 11, 2006 4:49 PM
Subject: Re: [ql-users] Problems with printing under XChange Archive
I had this problem perhaps eight years ago or so. I tried about seven
different PRINTER_DATs before finding one that did the
Hi Phoebus,
- Original Message -
From: Phoebus R. Dokos
Sent: Wednesday, January 11, 2006 6:35 PM
Subject: Re: [ql-users] Problems with printing under XChange Archive
Actually you can use it with the QL_SCREMU (or something like that...
check the QPC manual for details) command.
This
Hi George,
- Original Message -
From: George Gwilt
Sent: Wednesday, January 11, 2006 4:49 PM
Subject: Re: [ql-users] Problems with printing under XChange Archive
I had this problem perhaps eight years ago or so.
- End Original Message -
I have tried it now with v2.30 Archive.
Hi Marcel,
Try setting the number of lines to 0 in the printer driver and apply
this patch to your XChange:
http://www.kilgus.net/soft/xchangepatch2.zip
100% untested, as I don't even know how to test it nor understand what
exactly the problem is, but I'm still pretty sure it should work
Hi Tony,
Were you Ultrasoft then, or is that a misprint?
No, Ultrasoft was Martin Berndt (also a few programs from Jochen Merz were
released under that label), who also wrote QKick and TK3 .
Cheers...Ralf R.
___
QL-Users Mailing List
related item, please get in touch with either myself or Rich Mellor of
RWAP Services to see if we can help you.
On behalf of Quanta members and committee, may I wish you all a Very Happy
New Year, and Happy QLing.
Regards,
John Gilpin.
Quanta Treasurer.
- Original Message -
From: Ralf
:
- Original Message -
From: Ralf Reköndt [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, January 05, 2006 6:17 PM
Subject: [ql-users] Printing with QPCprint via XChange
I have tried to print in XChange Archive via QPCprint. Unfortunately,
XChange seems to let the PAR port
Hi Bill,
printing works ok (see what I have written abut text87). It also works
via SBasic. All no problem. QPCprint is used and first in the queue. So,
nevertheless, what kind of Windows printer is attached to QPCprint,
QPCprint is the first and leading part. If it does not give an output,
there
Tony,
I also get a lot (if not all) mails to the mentioned address back. But there
is another one, Dilwyn may tell us. Sending via his site seems to be safe.
Cheers...Ralf R.
- Original Message -
From: Tony Firshman censored
To: [EMAIL PROTECTED]
Sent: Monday, January 02, 2006 5:41 PM
] Q-Liberator 3.36 under SMSQ/E
Ralf Reköndt schreef:
Does anybody use Qlib v3.36 successfully under SMSQ/E (QPC2)?
I have used version 3.22, which runs ok. Version 3.36 gives a red Qlib
error
window after execution of Qlib_obj: Index out of range.
Is there a patch available?
(MK: 3.36
Hi Malcolm,
meanwhile, I have found out, that QLIB_BIN has changed from 3.22 to 3.36.
Mea culpa 8-). It now works ok. I have thought, that just Qlib_obj and its
inbuilt ASM extensions have changed (They have in fact changed QLib_obj as
the move sprite is now printed with the new routine
Hi Malcolm,
meanwhile, I have found out, that QLIB_BIN has changed from 3.22 to 3.36.
Mea culpa 8-). It now works ok. I have thought, that just Qlib_obj and its
inbuilt ASM extensions have changed (They have in fact changed QLib_obj as
the move sprite is now printed with the new routine
Does anybody use Qlib v3.36 successfully under SMSQ/E (QPC2)?
I have used version 3.22, which runs ok. Version 3.36 gives a red Qlib error
window after execution of Qlib_obj: Index out of range.
Is there a patch available?
(MK: 3.36 has sedit's config routines 8-))
Cheers...Ralf R.
Has safely arrived 8^).
Cheers...Ralf R.
-Original Message-
Date: Wed, 21 Dec 2005 11:51:24 +0100
Subject: [ql-users] Test to see if mailing list emails reach my email
account or being blocked by our internal IT-policy...
From: Koenig Urs
To:
Does someone know an easy way to convert a JPEG into a Mode 32 SCR file for
use as a BGIMAGE?
Cheers...Ralf R.
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
I have tried that (Demo) with Excel and it works. What would be a good idea
(or didn't I find the option?!): An option to translate the charcter set to
use the exported file with Win programs.
Cheers...Ralf R.
- Original Message -
From: Wolfgang Uhlig [EMAIL PROTECTED]
To: [EMAIL
Hi Marcel,
nice to hear. Thanks in advance!
Cheers...Ralf R.
- Original Message -
From: Marcel Kilgus [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, December 17, 2005 1:20 AM
Subject: Re: [ql-users] XCHange under QPC2
Ralf Reköndt wrote:
Does someone know, why the recent
WHAT? He does not remember? Can't really understand this. What was the time
of writing? As long as the program does not do dirty things, it would run
under the emulators. But I didn't believe.
Cheers...Ralf R.
- Original Message -
From: Timothy Swenson [EMAIL PROTECTED]
To: [EMAIL
They will check the ROM but they aren't copy protected (in conjunction with
files).
Cheers...Ralf R.
- Original Message -
From: Wolfgang Lenerz [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, December 17, 2005 5:26 PM
Subject: Re: [ql-users] Some help
The old Psion apps were
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, December 16, 2005 3:39 AM
Subject: Re: [ql-users] JPEG to SCR conversion
Ralf Reköndt wrote:
Does someone know an easy way to convert a JPEG into a Mode 32 SCR file
for
use as a BGIMAGE?
ex photon;'dos1_some_jpg':pause 300:sbytes
Does someone know, why the recent XCHange version still write a little white
rectangular into the screen when executed under QPC2? I alway thought,
Erling had changed this.
Cheers...Ralf R.
___
QL-Users Mailing List
Does someone know, why the recent XCHange version still write a little white
rectangular into the screen when executed under QPC2? I alway thought,
Erling had changed this.
Cheers...Ralf R.
___
QL-Users Mailing List
As far as I remeber: right click on the mouse.
Cheers...Ralf R.
Silly question? How do I do a DO on a filename in Cueshell, QPC2 Demo?
Dennis
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Does anybody know, why the original code from QL.Chess does not run on
emulators in 3D Mode? The text-only screen does run (on Atari SMSQ/E) but
after switching to 3D, the machine crashes.
Does it write into ROM area, where there is RAM on emulators?
Cheers...Ralf R.
What a pity. It had been so much easier just to look a QL Quill doc in
XChange PC if the formats were compatible. God only knows, why they are not.
Cheers...Ralf R.
- Original Message -
From: Dave Walker [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, November 27, 2005 7:59 PM
Hi David,
May not be the problem, consider that some drives put more power into a
write, and some are more sensitive in a read.
Yes, I know. In old QL-days I had a twin drive, which sometimes gave
unpredictable results on some disks. Later on the Atari, the drives a a bit
better. But
Today, I received the long awaited USB Diskdrive. Works good, unfortunately,
it takes a second ore two until it reacts after each command. A few disks
seem to be damaged (not with all files) but I hope the best. SPK built files
(just tried QL.Gardener) seem not to run under the QPCdemo (but ran
: Norman Dunbar [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, November 22, 2005 10:23 PM
Subject: Re: [ql-users] email address Phil Borman
Ralf Reköndt wrote:
SNIP
Hi Ralf, didn't know you were still around. How are things these days then ?
Haven't heard much from you since way back
401 - 451 of 451 matches
Mail list logo