Peter Fox wrote:
It just says ERROR press space to continue.
Above the 'error' it has 32 but what that means is not clear.
If you press space nothing happens so off to jobs to clear it.
Interestingly exactly the same problem happens with the DOS version of
Abacus (in PC Four).
A
Quite right and apologies.
I am running this on QPC2, my Aurora machine does not give this problem.
Incidentally, I have found that Abacus does work with 9Mb of memory but
that is because I am only using 16MB total.
The only program I use extensively is Archive because I have a program
that
Hi there,
I have three Psion Programs set up as ALT a for Abacus,
ALT b for Archive, and
ALT c for Quill.
I have found that if I start with loading Abacus, it loads with an
error. On the other hand, if I start
Peter Fox wrote:
Hi there,
I have three Psion Programs set up as ALT a for Abacus,
ALT b for Archive, and
ALT c for Quill.
I have found that if I start with loading Abacus, it loads with an
error. On the
- Original Message -
From: Tony Firshman [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, June 04, 2006 11:33 AM
Subject: Re: [ql-users] Curious behaviour of Boot Program
Peter Fox wrote:
Hi there,
I have three Psion Programs set up as ALT a for Abacus
I am using 2.53 and am using the pointer environment commands including
those which limit memory. The commands I am using are:
ERT HOT_LOAD ('a','ABACUS' ,p, 120)
ERT HOT_LOAD ('b','ARCHIVE' ,p,100)
ERT HOT_LOAD ('c','QUILL' , p, 100)
In article [EMAIL PROTECTED], [EMAIL PROTECTED] (Rich
I presume you mean 2.35 !!
What hardware are you running this on? Is there any reason why you are
not using Xchange as that is by far the better program !
Rich
On Sun, 04 Jun 2006 19:57:00 +0100, Peter Fox [EMAIL PROTECTED] wrote:
I am using 2.53 and am using the pointer environment
