On Wed, 7 Feb 2001 at 21:22:23, Dilwyn Jones [EMAIL PROTECTED]
.uk wrote:
(Ref: 005401c0914c$2f3ddfa0$ef065cc3@default)
I had reason to fire up my MinisQL tonight for the first time in a
long time. The reason was: I needed an 'old' system. I was trying to
copy a disk with CHR$(0) in the filename
Timothy Swenson writes:
Isn't there a way to check to see if a Keyword is available? In DJTK
there is
the CHECK command, that looks to see if a PROC/FN is available. I'm
guessing
this will work for the GD2 commands, like PALETTE_QL. Have not tried it
myself, but it's worth a look. Get
Exactly the same problem as I reported a week or so ago.
GO to SBASIC, enter OPEN#3,PAR and you'll find that seems to flush out
the printed output, if it's the same problem as I have with
QPC2v2final.
--
Dilwyn Jones
[EMAIL PROTECTED]
http://www.soft.net.uk/dj/index.html
Help! I just discovered
Tony Firshman wrote:
I assume you have made sure the ribbon cable is OK? Try pushing the
cable in and out to clean the connections (both ends).
Does the drive motor start at all?
When I switched it on again tonight to do a more thorough test, the
drive works in that it gives a dircetory
P Witte wrote:
Whats the best way for programs to test for GD2? Suggestions for
both
SBasic and assembler welcome!
DISP_TYPE returns 0 for QL mode, 32 for QPC/QXL 16bit and 33 for Q40
16bit.
In assembler the same function is available through the display
driver
thing.
Marcel
No good for
With the recent, and not so recent discussions on hardware vs emulators, I
decided to update everyone on the status of GoldFire. Especially since my
name was pointedly called :-) and I've gotten a few personal mails about it
too.
Well, folks (yeah, right, now I'm converting into a redneck) the
Dilwyn Jones wrote:
Time to give up on this one I think until I can get an old level 1 QL
out of the attic (it's an old QDOS disk so presumably worked at some
time!)
You could use a disc editor like wined, search for the filename and
replace the 0 with a valid character.
Marcel
Marcel Kilgus writes:
DISP_TYPE returns 0 for QL mode, 32 for QPC/QXL 16bit and 33 for Q40
16bit.
In assembler the same function is available through the display driver
thing.
Well, that solves that. Thank you ! :) Perhaps youd care to update the
manual: QPC2v2 supplement p13, states just
I posted that before but I got no answer. Here it is again.
C68Tool freezes on my QPC v.2 whenever I trie to type ANYTHING in the
fields (like make file filename etc... Only the colours options work). It
works with QPC 1 and uQLx but not with QPC v.2. Anybody know why. Do you
know of any
