Thus said "Shane Wise" on Tue, 05 Sep 2000 01:43:35 CDT:
I have 2 dsl connections to the internet with seperate providers. As it
stands know if the one with the default route dies I am sunk unless I am
here to change. I would like to have 2 default routes and have it use one
as the primary
Well, I know *why* it's happening, I'm just wondering where the
message
comes from, as the qmail source doesn't appear to have it, and we're
certainly not running a second MUA on the machine. : )
sorry about that, a quick grep on the source turns up
qmail-smtpd.c line 50
void
Oops, but that error message is from qmail--version 1.01 and earlier
if my memory serves. I'll bet djb decided it was too verbose and put
up a web page instead.
AH!
That explains it... thanks. Now I feel more comfortable that really
screwy things aren't happening on that machine.
I seem to remember someone saying that RAID5 is exactly the wrong kind
of RAID for a mail queue. As I understand it, RAID5 does read of the
same sector(?) of all spindles, recalculates parity, then a write back
to all (only one?) spindles. This would be quite a write penalty if
the RAID
Hello all. I'm relatively new to qmail.
I'm wondering if someone made newer version of following patch. (or like)
http://www.ornl.gov/its/archives/mailing-lists/qmail/1996/12/msg00261.html
I really need this kind of patch, since some mail servers are configured to
reject mail
if source IP
Hello,
I try to do header rewritíng as described by Tim Goodwin in the qmail
mailing list
(http://www.ornl.gov/its/archives/mailing-lists/qmail/1996/12/msg01800.html).
tcp.smtp (172.16.1.1 is the IP address of my desktop computer with MUA):
172.16.1.1:allow,RELAYCLIENT="@fixme"
I follow up myself..
Hello all. I'm relatively new to qmail.
I'm wondering if someone made newer version of following patch. (or like)
http://www.ornl.gov/its/archives/mailing-lists/qmail/1996/12/msg00261.html
I really need this kind of patch, since some mail servers are configured
to
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 7 Sep 2000, at 16:03, Dave Sill wrote:
The RFC says "should" not "must" or "MUST", so Jost is correct: the
RFC's don't *demand* it.
But doesn't that RFC say that MTA "should" deliver the message,
not "must"? If you think that "should" means
Hi,
I have some technical issue to
ask. Okay..I have a web server and mail server located side by side.
The web server isused to sendall of the on-lineinquires to the
mail server. SoI wouldlike to ask how to configure qmail to
accept incoming messages by using specific etherent card. From
Hi all, first of all, sorry for some of my poor english expresions
you'll find in my mail, but it's been long since I last used it ;)
Well, I have a problem which I don't know how dangerous for my system
may be, this is it.
I've installed qmail-1.03 with ucspi-tcp-0.88,
Does anyone know how to log POP3 Activities on Qmail (qmail-pop3d) ?
I need to log which email that retrieved by a pop3 users.
For example, here what Post Office does:
2905175728+0700:POP3-Server:Login:[x.x.x.x]:myemail
hello,
please help me with this problem. if qmail failed to deliver the emails to
the destination then automatically it will be bounce to the sender right?
if the bounces email have an attachment then how can i remove the
attachment so that only the text file or only the header not the body
will
Hi
Please help.
I have problem.
My qmail-server works correctly.
I set to mode stand-up from
http://www.palomine.net/qmail/selectiverelay.html.
Create a file in /etc called tcp.smtp. I read :
192.168.0.3:allow,RELAYCLIENT=""
127.:allow,RELAYCLIENT=""
:allow
this is OK
# tcprules
* Linux Curry [EMAIL PROTECTED] [000907 12:56]:
Please i really need help ..
http://qmail.org/top.html#paidsup
And you'll not make a lot of friends by reposting a message including
commercial banners for a site driven by MSExchange and NT.
qmail Digest 8 Sep 2000 10:00:00 - Issue 1117
Topics (messages 48246 through 48330):
Re: Why qmail can not receive hotmail messages?
48246 by: Jost Krieger
48258 by: Dave Sill
48280 by: Adam McKenna
48290 by: Jack O'Toole
48292 by: Dave Sill
On Fri, 8 Sep 2000, orca wrote:
Hi
Please help.
I have problem.
My qmail-server works correctly.
I set to mode stand-up from
http://www.palomine.net/qmail/selectiverelay.html.
Create a file in /etc called tcp.smtp. I read :
192.168.0.3:allow,RELAYCLIENT=""
127.:allow,RELAYCLIENT=""
Hey Chris,
You might as well just add the "*cough, cough* Please, read FAQ " to
you signature file.
Cheers
Sean Truman
www.prodigysolutions.com
[EMAIL PROTECTED]
- Original Message -
From: Chris K. Young [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, September 08, 2000
Why does qmail-popup change fd2 from stderr (which nicely goes into the
logger, usually) to a copy of fd1?
This fdcopy prevents checkpassword replacements from logging anything.
Greetz, Peter.
--
[ircoper][EMAIL PROTECTED] - Peter van Dijk / Hardbeat
[student]
Quoted from Peter van Dijk:
Why does qmail-popup change fd2 from stderr (which nicely goes into the
logger, usually) to a copy of fd1?
What's your setup? I thought, if you use the usual svscan setup,
_stdout_ gets logged.
---Chris K.
--
Chris, the Young One |_ but what's a dropped
How do I setup my mail server to help reduce the amount of spam it
receives.Or better what are the steps taken to do this.Also How do I
properly block out certain Ip's from sending mail to my server.
Thanks
Mike
I'm not sure yet if this is Qmail specific, but I thought that someone
here might have experienced this before and thus would have an idea since
we're all email Admins.
Users who are sending our mail servers mail from large sites such as
prontomail or hotmail occasionally get the following
On Fri, Sep 08, 2000 at 08:37:55AM -0700, Mike Jimenez wrote:
How do I setup my mail server to help reduce the amount of spam it
receives.Or better what are the steps taken to do this.Also How do I
properly block out certain Ip's from sending mail to my server.
You
cannot configure an application to only use a particular physical interface -
physical interfaces are isolated from applications by the layers of the IP
stack.
You
CAN have it listen on a particular IP address only, so that it doesn't respond
to the IP address that is assigned to
On Sat, Sep 09, 2000 at 03:26:28AM +1200, Chris K. Young wrote:
Quoted from Peter van Dijk:
Why does qmail-popup change fd2 from stderr (which nicely goes into the
logger, usually) to a copy of fd1?
What's your setup? I thought, if you use the usual svscan setup,
_stdout_ gets logged.
Quoting Brian Ghidinelli ([EMAIL PROTECTED]):
I'm not sure yet if this is Qmail specific, but I thought that someone
here might have experienced this before and thus would have an idea since
we're all email Admins.
Users who are sending our mail servers mail from large sites such as
I need setup a mail server with registry MX
I don't have a DNS Server
I use DNS server of other company.
The registry MX in my DNS is ready.
But in my configuration Qmail and Vpopmail isn't
Where and How will change for have all done?
Please ... I'm new in vpopmail
and too have a problem
*duh* - telnetting into the world from our mail server is prohibited by
the firewall hehe.
mail-abuse.org accepts mail from me via that server tho (relay reports).
You're welcome to use my experimental tester at
http://www.abuse.net/relay.html. It's more or less the same tests
that the MAPS RSS
On 8 Sep 2000, John R. Levine wrote:
| (Friendly hint: if you ignore the ugly blinking message and send me
| mail anyway saying that the tester claimed that your system is an open
| relay because it accepted the test message, I'll write back and call
| you a moron.)
|
Hrmm.. i just ran the
-installing on FreeBSD 4.1 RELEASE
-installing qmail 1.03 from FreeBSD Ports collection
-installed to /usr/local/qmail rather than to /var/qmail
-copied /usr/local/qmail/boot/home to /usr/local/qmail/rc
-in step 9 of PORT_NOTES (aka step 9 of INSTALL) it says to run
# csh -cf '/var/qmail/rc
On Fri, 8 Sep 2000, Steve Lewis wrote:
from /var/log/messages:
Sep 8 11:47:49 mybox qmail: 968438869.011886 alert: cannot start: unable
to read controls
please disregard, I recompiled on a hunch, and discovered an error that
slipped by me last time:
hard error
Sorry, I couldn't find
On Fri, Sep 08, 2000 at 12:47:16PM -0700, Steve Lewis wrote:
from /var/log/messages:
Sep 8 11:47:49 mybox qmail: 968438869.011886 alert: cannot start: unable
to read controls
It means it is unable to read its control files. That means you have an
ownership or perms problem somewhere in the
Hello all,
I am puzzled by what is happening when retrieving mail through
courier-imap. I connect to my Maildir remotely and I know that there is
no mail in my Maildir, but yet I am getting 24 duplicate messages back.
Where are these messages coming from? I tried to connect to another
El Fri, 08 Sep 2000, escribiste:
On Fri, 8 Sep 2000, Javier Ribelles wrote:
Hi all, first of all, sorry for some of my poor english expresions
you'll find in my mail, but it's been long since I last used it ;)
De nada.
;)
That works fine because qmail-inject creates From: and
On Sat, Sep 09, 2000 at 02:12:10AM +0200, Javier Ribelles wrote:
Ok, it's understud, but... why did it work before restarting the
machine? Why does it work with sendmail? (uh! don't hit me!! ;) ).
Qmail Doesn't Do That. It's that simple.
That's why I'm worried, I've worked for
Hi,
We just installed qmail 1.03 on a RedHat Linux 6.1 machine. We were
previously using our ISP's mail server to send out a batch of about 200
emails at the end each day with a Perl script that uses the Net::SMTP to
send then out.
The migration to qmail went great except for one minor
Hi guys
I need to be able to have the assign file (or at least the cdb) updated
across my servers each time the main server updates. The main server is
currently serving /etc/passwd across NIS, and each other server is acting as
a slave server, in case our main one goes down. Mail is delivered
Hi,
I host a domain name, say, "myfirstdomain" at
a webhosting company that has "catch-all"
e-mail feature. So, any email send to
"anyname@myfirstdomain" will be forwarded to
"othername@myotherdomain" (a qmail alias
at myotherdomain).
I have full access to myotherdomain.
I would like to
37 matches
Mail list logo
