ergy.
> Tell the customer to turn the hot tub up high, or something like that.
> Heat up a bathtub in a greenhouse and plant bananas.
>
> DonBarch
> Energy Solar
>
> From: Howie Michaelson
> To: Dave Angelini , RE-wrenches
>
> Subject: Re: [RE-wrenches] Inver
the hot tub up high, or something like that.
Heat up a bathtub in a greenhouse and plant bananas.
DonBarch
Energy Solar
From: Howie Michaelson
To: Dave Angelini , RE-wrenches
Subject: Re: [RE-wrenches] Inverter output fluctuations
Message-ID:
Content-Type: text/plain; charset="utf-8
the customer to turn the hot tub up high, or something like that.
> Heat up a bathtub in a greenhouse and plant bananas.
>
> DonBarch
> Energy Solar
>
> From: Howie Michaelson
> To: Dave Angelini , RE-wrenches
>
> Subject: Re: [RE-wrenches] Inverter output fluctu
-wrenches] Inverter output fluctuations
Message-ID:
Content-Type: text/plain; charset="utf-8"
Hi,
I was finally able to get to the site with the light pulsating issue. It
turns out it is that it directly corresponds to the AC coupled SolarEdge
HDwave 6kW inverter. Moreover, the puls
Take the covers off XW+ Boss ! Go to webinar this Thursday below.
Happy Sunday !
---
Hi Friends,
Because we ran out of time during the XW Pro Troubleshooting webinar, we
weren't able to take any
Jay,
I'm not sure what Schneider has to say, since Tech Support has been
impossible to reach this week (apparently something is wrong with their
phone system) and it was only recently that we determined the cause. It
should be under warranty, unless there is lightning damage. I will write to
my
Given that it worked fine for years it would appear that the XW+ has an issue. I don’t see how the SE could cause this. Is it still under warranty? What does Schneider say about the issue. JayOn Jul 22, 2023, at 10:33 PM, Howie Michaelson via RE-wrenches wrote:Michael, that is my last ditch
Michael, that is my last ditch choice as I will be eating the cost and
time. When I installed this setup 4+ years ago, having done a few similar
installations (although mostly on grid), I had not seen any issue with the
design, nor heard anyone else suggesting that this design might cause this
Replacing SE with Conext 600-100, Seriously, everything will then play
nice together, and it's only a matter of time before the SE has to go.
On Sat, Jul 22, 2023 at 4:02 PM Howie Michaelson via RE-wrenches <
re-wrenches@lists.re-wrenches.org> wrote:
> Hi,
> I was finally able to get to the
Hi,
I was finally able to get to the site with the light pulsating issue. It
turns out it is that it directly corresponds to the AC coupled SolarEdge
HDwave 6kW inverter. Moreover, the pulsating gets stronger with higher
output of the SolarEdge inverter (as more sun pouches more current through
It could be the LED bulbs. I've had different brands flicker like crazy
on grid and off. Seems to relate to other loads that are on, especially
stuff like washing machines with VFD drives, and well pumps. Add
dimmers and it can get even worse.
IMHO, they really need to improve the quality
I think I would try eliminating things. Turn off the AC coupling for a
few days and get results. Turn of DC solar and get results. Measure AC
voltage with a scope or just observe voltage during the flicker. Are all
of the lights flickering? Are they on dimmers? Are there any loads
failing
Hi All,
I upgraded an old clients' off-grid system about five years ago to a
Schneider XW6848+ and 2 Blue Ion 2.0 cabinets (32kWh). When the batteries
were moving toward full, if the charge rate was on the higher side via
generator or solar (AC coupled w/SolarEdge 6kW and DC coupled with an FM
13 matches
Mail list logo