Re: [RE-wrenches] Well pump with Sol-Ark

2023-10-11 Thread Dave Angelini Offgrid Solar via RE-wrenches
The Franklin with capacitor Jbox at top of well helps with the surge. It is not what you would call soft start! An ammeter (or a loud generator) on a soft start pump will tell you what you have. A nice slow over 10 seconds ramping up of amps or gen noise when the pump is energized. You

Re: [RE-wrenches] Well pump with Sol-Ark

2023-10-11 Thread Darryl Thayer via RE-wrenches
I have off grid customers where I have them install 1/2 HP pump, also Franklin soft start seems to help, low cost but I do not know how it works, it has a start capacitor I think. On Wed, Oct 11, 2023, 1:23 PM James Jarvis via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > On Wed, Oct

Re: [RE-wrenches] Well pump with Sol-Ark

2023-10-11 Thread James Jarvis via RE-wrenches
On Wed, Oct 11, 2023 at 1:14 PM Dave Angelini Offgrid Solar via RE-wrenches wrote: > Even the SQ pump without the controller will soft start and should work with > any inverter built for offgrid. > > The SQ pumps work great off grid. Easily run on 24 volt Magnum inverters without even flickering

Re: [RE-wrenches] Well pump with Sol-Ark

2023-10-11 Thread Dave Angelini Offgrid Solar via RE-wrenches
enches; Cc: frenergy; Subject:[RE-wrenches] Well pump with Sol-Ark I'm looking for opinions and/or real world experience on recommendation for the largest 240V submersible well pump the Sol-Ark 12KW inverter can start/run. Assume 500 watt load prior to starting the pump, static level of water in

Re: [RE-wrenches] Well pump with Sol-Ark

2023-10-11 Thread William Bryce via RE-wrenches
For high surge and unbalanced splitphase loads, you can’t beat a Midnite Solar Rosie Inverter. It uses Sic FET’s and is rock solid. I have an early unit and it’s starts my 5hp compressor and still runs other loads without a flicker. Runs loads that even my Schneider XW+ would not. Why

Re: [RE-wrenches] Well pump with Sol-Ark

2023-10-11 Thread frenergy via RE-wrenches
Interesting the variation in experiences. Most of my jobs are off-grid these days which almost always means a (reliable) well pump need.  I'd entertain the idea of 3-phase with VFD but that's quite a bit more  initial expense for this customer and possible higher long term costs with the VFD

Re: [RE-wrenches] Well pump with Sol-Ark

2023-10-11 Thread Chris Sparadeo via RE-wrenches
Hi Bill, I have yet to have an issue with the Sol Ark 12K and water pumps. We have numerous off-grid installations with 3/4 HP well pumps with no issues. I tend to find that compressors and inductive motor loads like chop saws are often an issue. Hope this helps, Chris On Wed, Oct 11, 2023 at

Re: [RE-wrenches] Well pump with Sol-Ark

2023-10-11 Thread Jerry Shafer via RE-wrenches
Chris, wrenches I have a few off grid or very close to off grid, I run well pumps, booster pumps, septic system pumps, no issues Fun times On Wed, Oct 11, 2023, 7:12 AM frenergy via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > > I'm looking for opinions and/or real world experience

Re: [RE-wrenches] Well pump with Sol-Ark

2023-10-11 Thread Glenn Burt via RE-wrenches
Based on the youtube video of the Sol Ark vs Schneider, I would never promise a customer it would reliably start up a motor load...-GlennSent from my 'smart'phone, so please excuse typos and spelling errors.-- Original message--From: frenergy via RE-wrenchesDate: Wed, Oct 11, 2023 10:11

Re: [RE-wrenches] Well pump with Sol-Ark

2023-10-11 Thread Jay via RE-wrenches
I’d look at a 3 phase pump with vfd/soft start control and eliminate the start surge. Jay > On Oct 11, 2023, at 8:12 AM, frenergy via RE-wrenches > wrote: > >  > I'm looking for opinions and/or real world experience on recommendation for > the largest 240V submersible well pump the

[RE-wrenches] Well pump with Sol-Ark

2023-10-11 Thread frenergy via RE-wrenches
I'm looking for opinions and/or real world experience on recommendation for the largest 240V submersible well pump the Sol-Ark 12KW inverter can start/run.  Assume 500 watt load prior to starting the pump, static level of water in well is 75 feet, system psi when it starts is 40. Thanks,