will
be useful for future keycloak members.
Thanks & Regards,
Santosh Raju Vysyaraju
--
redhat-list mailing list
unsubscribe mailto:redhat-list-requ...@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
Regards,
-santosh
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
is not at all booting...
Tried to search google lot but no where I got a fixed solution ..please
help me out to get out from this problem..
-Thanks Regards,
santosh
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
The arkeia software is good for your requirement...
-santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Cokey de Percin
Sent: Tuesday, October 07, 2003 3:01 AM
To: redhat-list
Subject: Re: Backup software suggestions
On Mon, 2003-10-06 at 11:30
/version/include/ as .config then
its giving some different error that could not be able to compile at
driver/ath_lan ie its not creating driver???
Any tips or any links will be highly appreciated.
-santosh
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com
Yes , I tried for linksys wmp54g with redhat 8.0 its worked fine for
me..
-santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of rhema
Sent: Monday, September 29, 2003 7:10 AM
To: [EMAIL PROTECTED]
Subject: 802.11g cards
Has anyone tried either
If your organization is small and you want to take backup upto 4-5
servers then arkeia is very good utility for linux..
-santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Denham Eva
Sent: Thursday, September 11, 2003 8:19 PM
To: [EMAIL PROTECTED
Try /etc/yp.conf with broadcast option, edit /etc/hosts with NIS server
name sometime it may help..
Regards,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Syed Ali
Sent: Thursday, August 07, 2003 2:22 AM
To: [EMAIL PROTECTED]
Subject: RE
I think / you can not export and can not mount..
Regards,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Daniel Tan
Sent: Tuesday, August 12, 2003 10:04 AM
To: Redhat 2
Subject: nfs newbie
hi all,
trying out nfs. trying to mount to root
adapter will it work with above mentioned access point???. Please give
your ideas.
-santosh
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
Hi,
mount /dev/hda1 /mnt/windows -t vfat -r -o umask=0222
This has been worked for me at lower version of kernel which you have.
-santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of bEEnHeX
Sent: Monday, August 04, 2003 5:20 PM
To: [EMAIL PROTECTED
Hi komal,
I too interested in writing the redhat 8.0 exam, please provide me that
pdf file which you have it would be great help.
My id is [EMAIL PROTECTED]
Guys sorry for disturbing all the gurus..
Thanks Regards,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL
Hi guys,
Want to configure linksys wireless card to laptop which has been
installed with redhat 8.0 (kernel 2.4.18-14), if anyone installed
successfully please dictate the same steps.
Expecting feedback from all experts.
-santosh
--
redhat-list mailing list
unsubscribe mailto:[EMAIL
If you are using NIS then check the /etc/auto_home at NIS server, may be
some spelling mistake..
Regards,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Zoki
Sent: Wednesday, July 09, 2003 10:22 PM
To: rhlist
Subject: Re: No directory /home
loose any data
3) What are the things to be done to make LVM work properly without
losing the data..
Please some one can answer to this query...Hope to hear from all of
you...
Thanks Regards,
santosh
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https
Hi guys,
Would like to ask some simple question, some users used to connect from
solaris to linux m/c through rlogin session but during some idle time
the session will disconnect automatically. To avoid this what could be
done??
Thanks Regards,
santosh
--
redhat-list mailing list
Just I downloaded this rpm pdksh-5.2.14-13.i386.rpm and installed with
command rpm -Uvh pdksh-5.2.14-13.i386.rpm , its started working with
ksh.
Regards,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Jon Haugsand
Sent: Thursday, July 03, 2003 1
Hi ajay,
I too getting same problem but only thing is that I installed MRTG on
windows platform..
Regards,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Raghuraj, Ajay
Sent: Friday, June 27, 2003 5:09 PM
To: [EMAIL PROTECTED]
Subject: RE: mrtg
your
introduction. I am keen to learn linux. DNS, Samba, Apache, SSL,
Server configuration in linux.
--
Best regards,
santoshmailto:[EMAIL PROTECTED]
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo
.
(database_api.php: line 34)
1045
Access denied for user: '[EMAIL PROTECTED]' (Using password: NO)
If anybody have experienced this kind error, please suggest your
valuable ideas...
Thanks Regards,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf
errors. I downloaded the gunzip file, did gunzip tar xvf.
Help me out to overcome with this problem, just I need some tips to make
clean installation..
Thanks Regards,
santosh
Ph: 5202424, 5273061 ext 102
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com
procedures, it should be either for windows or linux
.please please
Thanks Regards,
santosh
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
The m/c which is configured with hosts.deny hosts.allow is redhat 8.0
and the m/c from which only two users suppose to access is solaris 8.0
.
Regards,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Michael Schwendt
Sent: Friday, June 20
Hi all,
I have small and interesting question. I want to give telent access for
only 2 users, is it possible??? The system is configured with redhat 8.0
Thanks Regards,
santosh
Ph: 5202424, 5273061 ext 102
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https
Thanks guys I did it by editing /etc/hosts.deny
In.telnetd : [EMAIL PROTECTED] : all
Thanks for response...
Regards,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Michael Schwendt
Sent: Friday, June 20, 2003 2:01 PM
To: [EMAIL PROTECTED
), please tell me where I am doing wrong things...
Thanks Regards,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of santosh kumar
Sent: Friday, June 20, 2003 2:48 PM
To: [EMAIL PROTECTED]
Subject: RE: restrict telnet session
Thanks guys I did
impossible
---
totally stuck with the problem can anyone help to overcome with same
problem, it would be great help or else suggest any free bug tracking
tool which should be easy for installation.
Thanks Regards,
santosh
Ph: 5202424, 5273061
the
memory so I want to assign a high priority for a single user X that If
he logins to that m/c he has to get high priority in all aspects. Is it
possible? Please give some suggestions.
Thanks Regards,
santosh
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com
Regards,
santosh
Ph: 5202424, 5273061 ext 102
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
in linuxHoping that I will learn
more and more things in future then after I will also help to the troble people.
Thanks in Advance
--
Best regards,
santosh mailto:[EMAIL PROTECTED]
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https
needed to register separate domain name ?
Please tell me.
Thanks in Advance
--
Best regards,
santosh mailto:[EMAIL PROTECTED]
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
Hi guys,
Where to download gvim package for redhat 8.0, please suggest the links
Thanks Regards,
santosh
Ph: 5202424, 5273061 ext 102
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
package..
please suggest some tips to solve this problem..
Thanks Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Devrim GUNDUZ
Sent: Friday, June 13, 2003 6:30 PM
To: [EMAIL PROTECTED]
Subject: Re: gvim package
Hi,
On Fri, 13 Jun 2003
Thanks for reply guys, problem is solved actually I was not aware that
vim.tar itself installs gvim..
Regards,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Emmanuel Seyman
Sent: Friday, June 13, 2003 7:46 PM
To: [EMAIL PROTECTED]
Subject: Re
tried in graphic mode and text mode but cann't make activate.
Please tell me the way...
I will be very happy...
Thanks for your cooperation in advance
--
Best regards,
santosh mailto:[EMAIL PROTECTED]
--
redhat-list mailing list
unsubscribe mailto:[EMAIL
tried in graphic mode and text mode but cann't make activate.
Please tell me the way...
I will be very happy...
Thanks for your cooperation in advance
--
Best regards,
santosh mailto:[EMAIL PROTECTED]
--
redhat-list mailing list
unsubscribe mailto:[EMAIL
Hi Rahman,
Thanks for the instruction, I had succeed to complete my task of
aliases for the automatic list of files generate.
Thank you very much
--
Best regards,
santoshmailto:[EMAIL PROTECTED]
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED
pm.
If there is more things available then tell me
Thanks for you kind cooperation and good understanding
Best regards,
santoshmailto:[EMAIL PROTECTED]
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat
Hello SoloCDM,
Saturday, June 05, 2004, 6:39:42 PM, you wrote:
S On Thu, 5 Jun 2003, Santosh wrote:
S I wanna to send mail to all which I had created the mail a/c in my
S server.
S
S So, How can I do that how can I made aliases to send the mail to all
S users.
S In your aliases file
Hello Edward,
Sunday, June 08, 2003, 10:05:07 PM, you wrote:
ED santosh wrote:
Hello SoloCDM,
Saturday, June 05, 2004, 6:39:42 PM, you wrote:
S On Thu, 5 Jun 2003, Santosh wrote:
S I wanna to send mail to all which I had created the mail a/c in my
S server.
S
S So, How can
Dear all,
I had already installed the mail server in Linux
7.3 and it's working frequently.
I wanna to send mail to all which I had created the
mail a/c in my server.
So, How can I do that how can I made aliases to
send the mail to all users.
Please tell mesoon if any bodies have idea.
kernel so many times but never successes, Really stuck ...
Thanks Regards,
santosh
Ph: 5202424, 5273061 ext 102
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
Thanking You.
Best regards,
santosh mailto:[EMAIL PROTECTED]
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
Hello Devrim,
Wednesday, June 04, 2003, 1:53:56 AM, you wrote:
DG Hi,
DG On Wed, 4 Jun 2003, santosh wrote:
snip
Cann't mount, But It's display Mount : You must specify the filesystem type
DG So, specify the filesystem type:
DG mount -t vfat /dev/fd0 /mnt/floppy
DG For other filesystem
Hello Devrim,
Wednesday, June 04, 2003, 1:53:56 AM, you wrote:
DG Hi,
DG On Wed, 4 Jun 2003, santosh wrote:
snip
Cann't mount, But It's display Mount : You must specify the filesystem type
DG So, specify the filesystem type:
DG mount -t vfat /dev/fd0 /mnt/floppy
DG For other filesystem
-floppy driver 0.97
hda: ATAPI 52X CD-ROM drive, 120kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
cdrom: This disc doesn't have any tracks I recognize!
Thanks Regards,
santosh
Ph: 5202424, 5273061 ext 102
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https
You have to give command as
export DISPLAY=64.39.111.1:0.0 (for bash or ksh)
setenv DISPLAY 64.39.111.1:0.0 (for csh)
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Wes Reneau
Sent: Tuesday, June 03, 2003 5:45 PM
To: [EMAIL PROTECTED
drive, how to identify.
Please help to configure SONY DAT tape drive
Thanks for reading this much long male..
Thanks Regards, santosh Ph: 5202424,
5273061 ext 102
for tape drive, how to
identify.
Please help to configure SONY DAT tape drive.
Thanks for reading this much long male...
Thanks Regards,
santosh
Ph: 5202424, 5273061 ext 102
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
Hi,
Need to configure a 2nd mail server to swich instantly in case of 1st
server crashes..
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Zoki
Sent: Wednesday, April 02, 2003 7:22 PM
To: rhlist
Subject: Re: Configure secondary mail server
I am getting correct output for single CPU but getting confusion for
more than one CPU.
If more than 1 CPU then my output has to be like this
1st CPU model : pentium III
1st CPU speed : 1.73 GHz
2nd CPU model : pentium IV
2nd CPU speed : 2.4 GHz
Please give some tips..
Thanks Regards,
santosh
Want to configure secondary mail server to switch instantly in case of
primary mail server crashes.
The primary mail server is configured with fetch mail.
Please anyone advice any links or steps to configure secondary mail
server..
Thanks in advance..
Thanks Regds,
santosh
-Original
my primary DNS is acting as gateway also...
In this scenario to configure secondary DNS server shall I need to
register secondary DNS server name???
Shall I need to assign both Public private IP addresses for
secondary??
Please suggest..
Thanks for replies..
Regds,
santosh
-Original Message
suggestions..
Thanks in advance..
Thanks Regards,
santosh
ph : 080-5273061,5202417
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
I want to configure Secondary DNS test it for disaster recovery, so I
can avoid down time in case of problem with Primary DNS server...
Desperately waiting for all guru's answers...
Thanks Regards,
santosh
ph : 080-5273061,5202417
--
redhat-list mailing list
unsubscribe mailto:[EMAIL
disaster recovery???
If you specify some steps it would be great helpful..
Thanks Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Alexey Fadyushin
Sent: Monday, March 31, 2003 3:36 PM
To: [EMAIL PROTECTED]
Subject: Re: Secondary DNS
You
Title: Message
Hi,
Go
through the file, just modify domain name instead of workgroup which i am
using..Hope it will help u
Regds,
santosh
-Original Message-From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Brent L. CoxSent: Wednesday, March 26, 2003 11:07
I think u have to edit /etc/resolv.conf also... restart the
/etc/init.d/xinetd
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Steve Buehler
Sent: Tuesday, March 25, 2003 9:51 AM
To: [EMAIL PROTECTED]
Subject: changing server domain name
You have to edit /etc/sysconfig/networks /etc/hosts restart ...
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of knesbitt
Sent: Saturday, March 22, 2003 12:01 PM
To: [EMAIL PROTECTED]
Subject: Setting host or hostname
trying to convince
We will run some VLSI design simulators like verilog, when m/c was new
the performance was very good. But now a days performace is degraded, I
couldn't be able to figure out the bottleneck. Can you suggest some
steps to figureout the problems...
Regds,
santosh
-Original Message-
From
suggest to speed up simulation testing what to
be done??
Thanks for hearing the query...
Thanks Regards,
santosh
ph : 080-5273061,5202417
the configuration not getting perfomance. To complete a simulation its taking hell of time..
Can any one suggest me what to do or what kernel parameters to be changed for fine tuning???
Thanks Regards,
santosh
ph : 080-5273061,5202417
. To complete a simulation its taking
hell of time..
Can any one suggest me what to do or what kernel parameters to be changed
for fine tuning???
Thanks Regards,
santosh
ph : 080-5273061,5202417
attachment: winmail.dat
as a backup, so in case of any crash I can avoid down
time.
Please give your valuable feedbacks.
Thanks for reading my query..
Thanks Regards,
santosh
ph : 080-5273061,5202417
Title: Message
You
don't need to reboot the PC, just restart the /etc/init.d/network...
that'sit.
Regds,
santosh
-Original Message-From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Patrick LawSent: Thursday, March 13, 2003 10:54
AMTo: [EMAIL PROTECTED
IP
addresses
Please anyone can tell the requirements
configuration procedures..it would be great help..
Thanks Regards,
santosh
ph : 080-5273061,5202417
What the heck are you doing?? We are hear to discuss some linux problems
not to see your adult sites...
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Harold Purbal
Sent: Thursday, March 06, 2003 11:23 PM
To: [EMAIL PROTECTED]
Subject
Hi,
Copy /etc/sysconfig/network-scripts/ifcfg-eth0 to eth1,eth2
And edit the files with option ONBOOT=yes
And restart...this is what solved my problem check for IRQ conflict..
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Chris
Its cool man,
Export the home directories by editing /etc/exports. Edit the indirect
maps like /etc/auto_home /etc/auto_master (for automounting) in NIS
server restart automount at NIS server or reboot the server.
that's it..
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED
and error unknown host.
But from same windows m/c i can ping that
linux CVS server by hostname, both are in same LAN.
waiting for your valuable
suggestions..
Thanks Regards,
santosh
ph : 080-5273061,5202417
If u boot into smp kernel mode it will show both processors..
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of [EMAIL PROTECTED]
Sent: Saturday, March 01, 2003 12:14 PM
To: [EMAIL PROTECTED]
Subject: How to enable Dual Processors of HP
to overcome with the
problem..I couldn't be able to understand the problem itself..
Thanks Regards,
santosh
ph : 080-5273061,5202417
As Erick told, definitely its problem with home directory. When u try to
login user ID couldn't be able to get home directory. Try to login as
root, hope it has to allow..
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of shyam
Sent
Thanks everyone, finally I got resolved the problem..
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Gene Yoo
Sent: Thursday, February 27, 2003 2:41 AM
To: [EMAIL PROTECTED]
Subject: Re: strange problem
Rus Foster wrote:
On Wed, 26 Feb
/messages of that
m/c
Feb 27 12:47:37 halley
login(pam_unix)[7314]: session opened for user san by (uid=0)Feb 27 12:47:56
halley login(pam_unix)[7316]: session opened for user sastry by
(uid=0)
Thanks for looking into query..Need unix
gurus suggestions
Thanks Regards,
santosh
ph : 080
Yaa u can do it by bonding for that u have to compile the kernel again.
I also tried to do samething but compiled kernel is not booted for me so
reverted back with same thing but u can try with recompiling the
kernel..
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto
Hi,
I am not able to ping default gateway, but I can ping my own IP
address..
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Jerome Dsilva
Sent: Tuesday, February 25, 2003 12:34 PM
To: [EMAIL PROTECTED]
Subject: RE: NIC card problem
255.0.0.0 U40 0 0
lo
0.0.0.0 192.168.3.100.0.0.0 UG 40 0 0
eth0
This time I enabled both NIC cards for which same IP is assigned..If I
connect to eth2 it don't work and for eth0 it will work fine..
Regds,
santosh
-Original Message-
From
Title: Message
Hi everyone,
I am getting some very strange problem. I
can not ping and cannot telnet to redhat 7.2 m/c but from redhat m/c i can
telnet ping other m/cs in the network..
To overcome with same, please give your
valuable feedbacks..
Thanks Regards,
santosh
ph : 080
speed so just I want to use eth2. Whenever I revert back
all the stuffs like configuring only eth2 again it will work for 2-3
mins and goes down.
Getting only problem with eth2 card.
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of [EMAIL
/network its starting without any error, i checked errors in
/var/log/messages, nothing is there. Can any one give there valuable suggestions
for the same, is it problem with IRQ conflict??
Thanks Regards,
santosh
ph : 080-5273061,5202417
kernel from
/usr/src/linux version/arch/i386/ to /boot/ modify the
grub.conf or lilo.conf (whatever u have) reboot the
system..
Regds,
santosh
Title: Message
Hi,
The
network is fine, becoz same cable network port i tried with other m/c its
working fine..
Regds,
santosh
-Original Message-From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Amit MhatreSent: Tuesday, February 25, 2003 11:55
AMTo
Title: Message
If it
is happening while logging in as a normal user, then its problem with user
authentication. And try to login as a root, if it will work normally then it
must be a problem with user authentication means not your client m/c is not
binding with NIS ...
regds,
santosh
automatically..
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
On Behalf Of senthil@jadooworks
Sent: Thursday, February 20, 2003 7:49 PM
To: [EMAIL PROTECTED]
Subject: Re: NIS problem
Hello Martin,
Thanks for the reply. I managed to fix the problem. I
/
For this all home directories of users are physically reside in Serverx
you have to share same stuff to all m/cs by editing /etc/exports at
ServerX.
Here auto_home is indirect map auto_tech is direct map. I hope it will
solve your problem..
Regds,
santosh
-Original Message-
From: [EMAIL
Yes sir, u have to create remaining files give the permission as of
auto.master
Then update the database by executing /usr/ccs/bin/make..
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
On Behalf Of senthil@jadooworks
Sent: Friday, February 21, 2003
Hi,
The file you mentioned bonding.txt is not there in
/usr/src/linux/Documentation/networking/
If you send me the same file it would be very helpful or else is it
possible to send all steps to follow for bonding..
Thanks in advance...
Thanks Regds,
santosh
-Original Message-
From
Title: Message
This
you can achieve by NIS or NIS+, but first you need to study about your all
requirements and implement one of the methodseither NISor
NIS
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of
senthil
Title: Message
Hi,
check
your /etc/yp.conf /etc/nsswitch.conf files...
Regds,
santosh
-Original Message-From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On
Behalf Of senthil@jadooworksSent: Thursday, February 20, 2003
3:01 AMTo: [EMAIL PROTECTED]Subject: NIS
, m/c is registered with
192.168.3.16.
If i assign the IP address in above
mentioned manner will it increase performance? andwhat shall i need to do
to resolve all IP addresses with same hostname?
Suggestions will be
appreciable
Thanks Regards,
santosh
ph : 080-5273061,5202417
Hi,
I think u can manually edit or delete the partitions by fdisk command..
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
On Behalf Of Ramesh .T.S
Sent: Wednesday, February 19, 2003 12:53 PM
To: [EMAIL PROTECTED]
Subject: Re: How to configure
Have u tried with GUI base??
It may work bcoz there u will get a option to set user home directory..
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
On Behalf Of Bret Hughes
Sent: Thursday, January 23, 2003 1:12 PM
To: [EMAIL PROTECTED]
Subject: Re: adduser
On Thu,
intention is to configure present IP address with High speed card..
Please direct me towards right thing..
Thanks Regds,
Santosh..
-
dmesg | grep eth
this should show
If you try to load redhat 7.2 with normal installation, I hope it will
work but u have to make some small changes at /etc/X11/XF86config-4.
Edit this file make changes like
Section Device
Identifier My Video Card
Driver vesa
BoardName Unknown
Hope it will work..
but physicall i have only 2
NICs.
To change IP i tried the following
stuffs:
ifconfig eth1 192.168.3.16 netmask
255.255.255.0
ifconfig eth1 up
ifconfig eth0 down
and rebooted the m/c but still its not
working..
Please help me out to config Gigabit
card..
Thanks Regards,
santosh
ph : 080
hi all,
I need to design an text based menu interface for users
Whatz the best tool to use and where can I find more info and an how2 ??
thanks
Santosh
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
great help , Thanks a million !
rgds,
santosh
- Original Message -
From: Hanigan Family [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, December 29, 1999 7:16 PM
Subject: Re: Menu Interface
I have two books I used years ago to learn shell
programing
Unix Shell
greetings ,
would someone kindly point me to a resource detailing how2
use dialog to create custom menus .
with rgds,
santosh
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
greetings ,
would someone kindly point me to a resource detailing how2
use dialog to create custom menus . ( or if any other packages ?)
with rgds,
santosh
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
1 - 100 of 101 matches
Mail list logo