I've created a bug report for this problem - bug #6980 located at
https://gna.org/bugs/?6980.
Edward
On 9/13/06, Edward d'Auvergne [EMAIL PROTECTED] wrote:
That one is a real bug. The problem is a typo, the double = sign
should be a single = sign. The line should read self.SYS = 'Win'. I
On 9/28/06, Alexandar Hansen [EMAIL PROTECTED] wrote:
Hello,
I would first like to apologize that this post is going to be painfully
remedial and likely nothing more than spam to most, but I am really having
trouble getting relax to work and I don't know if it's because of me, or if
I don't
relax is only requires residue numbers. The residue name can be
absolutely anything! Therefore as long as there is one data set per
residue then it should be fine. If there are two or more data sets
per residue, then relax will have problems. That should be fixable if
required though.
Edward
For the input of data into relax, the difference between spaces, tabs,
and other whitespace characters doesn't matter. relax will treat all
whitespace the same. And the number of whitespace characters in a row
is inconsequential as well. As long as the columns are clearly
separated by
Unfortunately this approach won't work. You would need to create an
additional loop where you loop through the residues (in the future
maybe data sets) and set the value on a per residue basis. You would
need something like:
value.set(name, 1.01 * 1e-10, 'bond_length')
Hi,
In relaxation data analysis, you can only view the components of the
Brownian rotational diffusion tensor that the XH bond vectors sample.
So if your macromolecule diffuses as a prolate spheroid but the XH
bond vectors are close to perpendicular to the unique axis of the
tensor, the only
the largest
CS, but that's just me. dzz is more often than not the direction
perpindicular to the base plane, although it varies with your choice of CSA
tensor source (DFT, SS NMR, Solution NMR, etc.).
Alex
On 10/5/06, Edward d'Auvergne [EMAIL PROTECTED] wrote:
That's a good idea, the eigenvector
Diffusion modelRoundMachine Time Time_for_opt/
======== =
local_tm --- Pelican 15h00
sphere MII initPelican
The 'grace.write()' user function is now implemented for reduced
spectral density mapping. Daniel, would you be able to test this code
to see if everything works well for you? I've tested the changes on
some basic data and the user function appears to be operating OK.
Edward
On 10/23/06, Daniel Perez [EMAIL PROTECTED] wrote:
Hi Edward,
the function grace.write for the spectral density results
is working fine for the most. I just got an error when I tried to plot
the simulations ('sims').
To help solve the problem, would you be able post the details of the
issue?
On 10/23/06, Edward d'Auvergne [EMAIL PROTECTED] wrote:
On 10/23/06, Daniel Perez [EMAIL PROTECTED] wrote:
Hi Edward,
the function grace.write for the spectral density results
is working fine for the most. I just got an error when I tried to plot
the simulations ('sims').
To help solve
In a post to the relax-devel mailing list
(https://mail.gna.org/public/relax-devel/2006-10/msg00136.html,
Message-id: [EMAIL PROTECTED])
I discussed an idea about representing the Brownian rotational
diffusion tensor superimposed onto the 3D molecular structure. For a
better understanding of the
Hi,
Welcome to the relax-users mailing list. Using your attached data
I've been able to replicate the issue. I think I know what is
occurring, but relax's print out doesn't really tell you what the
issue is. This can easily be fixed though. Would you like to create
a bug report at
I've now fixed the issue. Steve reported the problem as bug #7676
(https://gna.org/bugs/index.php?7676), and the fine details of the fix
are available at that link. The problem was that relax was assuming
that the w1 dimension in the XEasy text file was the proton dimension.
There was also a
Hi Sebastien,
This is just a follow up query from an old post. Did your
calculations using the new model-free optimisation protocol
implemented in the 'full_analysis.py' script eventually finish? If
so, did it take much longer than a week?
Cheers,
Edward
On 10/17/06, Sebastien Morin
Actually this is a real bug which has now been fixed. This issue is
related to bug #7755 (https://gna.org/bugs/index.php?7755). For an
identical error message, see the post by Stephen Headey
(https://gna.org/users/sjheadey) located at
Hi Barbara,
Welcome to the relax users mailing list. The problem you're
experiencing is an interesting one, I've not seen it before. Under MS
Windows, I run relax under GNU/Linux though, the program versions I
have which allow relax to run flawlessly are:
Windows: XP
Python: 2.4.3
relax:
On 1/8/07, Hongyan Li [EMAIL PROTECTED] wrote:
Dear Relax-users,
I am trying to use RELAX to fit my dynamic data and now I have tried the
simplest model (isotropic) to simulate the data and get a proper model for each
residue and I would like to do Mone Carlo Simulations like that:
On 1/8/07, Chris MacRaild [EMAIL PROTECTED] wrote:
I certainly expect Chi-squared and the dynamic parameters to be highly
dependent on the value of tm. This is why I recomend the extensive
iteration of steps 2-4 below, in an attempt to find the optimal fit. I
would expect if you start the
Hi,
The first part of your post is simple to respond to as I have used
exactly this approach in my PhD thesis. This is described in Chapter
7 of the thesis which can be downloaded from
http://eprints.infodiv.unimelb.edu.au/archive/2799/ . The
hybridisation function docstring
now without any luck].
Doug
On Jun 25, 2007, at 9:01 AM, Edward d'Auvergne wrote:
Hi,
Would you be able to print the AIC and k values as well? k is the
number of parameters in the model. The places where the chi-squared
value increases rather than decreases is because of a collapse
A for bond length and -172
ppm for CSA (for 15N-1H vectors).
Should the default values in the relax code be modified, changing the
CSA from -170 (at least in the jw_mapping code) to -172 ppm ?
Cheers
Séb :)
Edward d'Auvergne wrote:
There has been much work describing
Hi,
Sorry, I'm not exactly sure what the graphs correspond to. Is
't-rex-sim.agr' Modelfree4 using the prolate (or oblate) spheroid
(this is axially symmetric anisotropic Brownian rotational diffusion)?
And is 't-rex-relax.agr' the results from relax using the spheroid
tensor? Have you used
Hi,
This is exactly correct. The formula you report Seb should be
sd(NOE) = NOE * sqrt({sd(sat)/I(sat)}^2 + {sd(unsat)/(unsat)}^2).
Note the division rather than the multiplication. This formula is
directly from Farrow et al. (Biochem. (1994), 33, 5984-6003). If you
replace the
, in __init__
converged = self.convergence(run=name)
File full_analysis.py, line 368, in convergence
curr_models = curr_models + self.relax.data.res[run][i].model
AttributeError: Element instance has no attribute 'model'
Thanks,
Doug
On Jun 27, 2007, at 11:22 AM, Edward d'Auvergne wrote
Hi,
You have to be careful with error analysis as the errors are as
important as the data itself! By 4 sets of R1 values, I would assume
that you have these all at the same field strength. With this data
there are a number of ways the data can be used in relax and a number
of ways its error can
)
# Write the results.
...
That should be enough to solve the problem (hopefully).
Cheers,
Edward
I think that's almost everything I can find now...
Let me know if you know how to catch those problems before they appear...
Cheers
Séb :)
Edward d'Auvergne wrote:
Hi,
I've
Gary,
Thanks for the response. I have applied Doug's patch 'patch2'
attached to the bug #10022 report at https://gna.org/bugs/?10022.
This simple patch solves the issue by catching the problematic
situations and just ignoring them. The solution is similar to your
last example.
Regards,
Edward
different magnetic fields (at least
two) can be input at once and correlation plots made automatically as long
as correlation, skewness and kurtosis coefficients calculated also
automatically...
Cheers
Sébastien :)
Edward d'Auvergne wrote:
On 10/16/07, Sebastien Morin [EMAIL
?
Would you suggest another approach ?
Cheers
Sébastien :)
Edward d'Auvergne wrote:
Hi,
The only differences in the analysis should be due to different bond
orientations. The PDB reference frame doesn't matter - this will only
change the values Euler angles of the diffusion
).
===
Let me know if something misses...
Regards
Séb :)
Edward d'Auvergne wrote:
Hi,
Prior to me committing these patches, would you be able to write the
full commit message for these so I can just cut and paste them? For
example links to posts
Hi,
On Nov 9, 2007 4:20 PM, Sebastien Morin [EMAIL PROTECTED] wrote:
Hi Ed,
Your comments are interesting... but nevertheless trouble me...
My comments being troubling is a common occurance ;)
I talked with the guy who makes the MD simulation with my protein. He
noticed that some NH
Hi,
I didn't include the XH bond distribution scripts with relax. There
were a couple of these to generate the figure. These 2 file have been
attached to this message. 'dist.py' generates parts c and d whereas
'dist_core.py' generates parts a and b. For those who are interested,
this figure
: The Brownian rotational diffusion tensor of OMP
as determined by the
new model-free optimisation protocol ?
Thanks,
Doug
On Dec 9, 2007, at 9:49 AM, Edward d'Auvergne wrote:
Hi,
I didn't include the XH bond distribution scripts with relax. There
were a couple of these to generate
Hi,
From the diffusion_tensor.init() documentation for the spheroid:
The spherical angles {theta, phi} orienting the unique axis of the
diffusion tensor within the PDB frame are defined between
Similarly for the ellipsoid:
The angles alpha, beta, and gamma are the Euler angles describing the
Hi,
If you have 5 relaxation data sets, you can use the full_analysis.py
script but you will need to remove model tm8. This is the only model
with 6 parameters and doing the analysis without it might just work
(the other tm0 to tm9 models may compensate adequately).
I've looked at the script
} be removed
to use the full_analysis.py protocol?
Thanks,
Doug
On Jan 10, 2008, at 1:31 PM, Edward d'Auvergne wrote:
Hi,
If you have 5 relaxation data sets, you can use the full_analysis.py
script but you will need to remove model tm8. This is the only model
with 6 parameters
Done! See https://mail.gna.org/public/relax-commits/2008-01/msg00376.html.
The current version of the script in the 1.2 line will now properly
handle not having a PDB file if you set the value of PDB_FILE to None.
Nevertheless, I would be very careful with the conclusions. If there
are regions
On Jan 10, 2008 10:06 PM, Douglas Kojetin [EMAIL PROTECTED] wrote:
A question re: unresolved residues. Is it necessary to list unresolved
residues in this file if no data was supplied for these residues? Example
r1 file (made up):
1
2
3 2.7114 0.05
4. 2.6151 0.04
Do residues 1 and 2
unselect.read(run='tm0', file=None, dir=None, change_all=0,
column=0)
RelaxError: The file name argument None must be a string.
However,
UNRES = 'None'
does not yield this error and the script proceeds...
Am I right ?
Séb :)
Edward d'Auvergne wrote:
On Jan 10, 2008 9:59
.
relax repository checkout
Protein dynamics by NMR relaxation data
analysis
Copyright (C) 2001-2006 Edward d'Auvergne
Copyright (C) 2006-2008 the relax
development team
Copyright (C) 2001-2006 Edward
d'Auvergne
Copyright (C) 2006-2008 the relax
development team
This is free software which you are welcome to modify and
redistribute under the conditions of the
GNU General Public License (GPL). This program, including all
? The 'diff_tensor_pdb.py'
script seems to output only a subset of atoms to a residue called 'TNS'.
Thanks again,
Doug
On Jan 24, 2008, at 11:16 AM, Edward d'Auvergne wrote:
Hi,
The 'diff_tensor_pdb.py' script has no chance of currently running on
the 1.3 repository line code! The reason
Sorry for the delayed response. Work has been quite hectic at the
moment. This is a clear bug, so if you could submit a bug report,
that would be much appreciated. A catch for n == 0 could be added to
fix this problem, but I am very interested in why this situation
occured in the first place.
?
Doug
On Jan 10, 2008, at 2:36 PM, Edward d'Auvergne wrote:
Yes, with 4 data sets you could remove tm6 to tm8. You would also
need to remove m8. But in this situation, you will be significantly
biasing the initial position (the starting universe will be further
away from
On Feb 8, 2008 4:54 PM, Sebastien Morin [EMAIL PROTECTED] wrote:
Hi,
I have a theoretical question about Model-Free analysis concerning the
minimum amount of data required...
In ModelFree, it is possible to obtain fitted parameters for residues
for which only one R1 and one R2 datasets are
Hi,
In relax, the Rex reported will be that of the first input field
strength. The frequency of the Rex value is documented in the header
line of the results file. This is a deliberate design to increase the
flexibility of relax - Rex is automatically handled for you. If you
would like to
Hi,
Unless turned off, the constraints are used all of the time. In the
minimisation this turns on the Method of Multipliers (also known as
the Augmented Lagrangian) algorithm. In the grid search, any points
outside of the limits are dropped. Unfortunately these constraints
are hard coded as I
On Fri, Feb 22, 2008 at 6:03 PM, Sébastien Morin
[EMAIL PROTECTED] wrote:
Hi,
I am trying to use the full_analysis.py script for optimizing model m11
to m15 (m1 to m5 with CSA) for a system for which I have datasets at
three magnetic fields (500, 600, 800 MHz).
The optimization is quite
Dear Keith,
I'm sorry for the late response, I've only just come back from the ENC
conference. The software relax can operate without problem using
single field strength data and should be able to replicate all
published model-free results (after significantly decreasing its
precision and
Hi,
If you are following this thread from the relax-users mail archive
(https://mail.gna.org/public/relax-users/), then you will find the
response at https://mail.gna.org/public/relax-users/2008-03/msg4.html.
Regards,
Edward
On Tue, Mar 18, 2008 at 1:01 PM, Keith L Constantine
[EMAIL
Hi,
I've also cut and pasted the numbers into files, and run the script
using various versions of relax (1.2.10, 1.2.11, 1.2 repository line,
1.3.0), and all works fine for me too. I get Grace plots with all
points shown. I'm not sure what is happening, but we should be able
to get to the
of the protein
(up to the huge correlation time of 200 ns !) does not influence the
results...
As usual, relax is extremely professional...
Thanks Ed !
Cheers !
Séb
Edward d'Auvergne wrote:
Hi,
Unless turned off, the constraints are used all of the time. In the
minimisation
Hi,
This error looks like a bug in relax. I haven't tested the back
calculation code for a little while, and I haven't noticed this
problem before. I do have a few ideas as to what the problem is but,
to help fix this issue, would you be able to create a bug report at
Hi,
Please see below for my replies.
On Fri, Mar 28, 2008 at 2:59 PM, Carl Diehl [EMAIL PROTECTED] wrote:
Hi.
I used the full_analysis.py script for testing and evaluating relax in
comparison with published data.
The system was calcium-loaded Calbindin D9k, with R1 NOE at 600 MHz
and
Hi,
This is simple enough to do. The user function palmer.extract() will
extract all the data (well that used by relax) out of Modelfree's
mfout files.
Regards,
Edward
On Tue, Apr 1, 2008 at 11:41 PM, Sébastien Morin
[EMAIL PROTECTED] wrote:
Hi,
I have different model-free analysis that
On Wed, Apr 2, 2008 at 4:23 PM, Carl Diehl [EMAIL PROTECTED] wrote:
On Mon, 2008-03-31 at 11:28, Edward d'Auvergne wrote:
On Fri, Mar 28, 2008 at 2:59 PM, Carl Diehl [EMAIL PROTECTED] wrote:
Hi.
I used the full_analysis.py script for testing and evaluating relax in
comparison
On Wed, Apr 2, 2008 at 7:11 PM, Sébastien Morin
[EMAIL PROTECTED] wrote:
Hi,
I tried to use the palmer.extract() function, with no real success...
I have to admit that my Modelfree star format parser is not of very
high quality. It woks if you use the palmer.py sample script, but
obviously
loads a saved state from stage 1 where all those information were input...
For the run 'None' being selected, yes, it is for all spins... Running with
the '--debug' flag doesn't change anything...
Cheers,
Séb
Edward d'Auvergne wrote:
On Wed, Apr 2, 2008 at 7:11 PM, Sébastien
Hi Seb,
That's an interesting one. That message is a debugging statement that
should only be triggered if someone goes into the relax source code
and tries to reprogram the constraints algorithm or tries to implement
a completely new algorithm. It shouldn't appear in the 1.2 stable
releases and
Hi,
This problem is a hard one to handle. There is already a bit of code
in relax's parser of Modelfree's mfout STAR formatted file which
handles corrupted mfout files (the problem was with fused columns with
many *). But catching this one is much harder. The easy fix here
it to put an
.
However, I would like to know if it is possible to calculate the AIC for a
given hybrid... and possibly compare different hybrids together within
relax...
Thanks !
Have a nice day !
Séb :)
Edward d'Auvergne wrote:
Hi,
This problem has quite a simple answer. There is no results
Hi,
I've been thinking about this one for a while, but I don't know
exactly what the problem is. I have a few ideas that may help though.
This could either be some type of interesting dynamics, or be caused
by something a bit more sobering.
Firstly though, it is worth comparing the local tm
more information out of
their system...
Thanks a lot once more !
Cheers !
Sébastien
P.S. Again, sorry for the length of the mail...
Edward d'Auvergne wrote:
Hi,
I've been thinking about this one for a while, but I don't know
exactly what the problem is. I have a few ideas
Hi,
I'm not exactly sure what the 'dist.py' and 'dist-core.py' scripts are
trying to do, but relax is capable of representing bond vectors in a
number of ways. For example the sample script 'angles.py' can be used
to extract the angle between the XH vector and the unique axis of a
prolate or
Hi,
I haven't seen that error message in a long time. Which version of
Python are you using? The only thing I can think of at the moment is
that this is a very old version which doesn't include the profile
module. This non-essential import could be made optional in relax,
but I have a feeling
Hi Jack,
Thank you for adding relax to Fink
(http://pdb.finkproject.org/pdb/browse.php?name=relax). I've always
wanted to have pre-compiled binaries for OS X however I haven't had
access to the hardware to do this. I did add scons code for the
compilation of the C modules specific to OS X but
Hi,
Welcome to the relax users mailing list. I've seen this problem
before but can't remember exactly what is causing it. We should be
able to fix this though. I'm pretty sure that the suggestions on the
internet of using distutils for this are out of place. I use
distutils for the minfx
Hi,
I forgot to ask but if you could report if this was successful, or the
steps you took to fix this, that would be much appreciated as the
acheived message will help other users in the future.
Regards,
Edward
On Thu, Oct 2, 2008 at 10:19 AM, Edward d'Auvergne [EMAIL PROTECTED] wrote:
Hi
On Thu, Oct 2, 2008 at 6:11 PM, Tyler Reddy [EMAIL PROTECTED] wrote:
I'm looking at the possibility that it is a problem with the python header
file
as suggested in the first solution message. I haven't found a distribution
of
the 'Python Development Files' that are mentioned that I can open
out of range
Quoting Edward d'Auvergne [EMAIL PROTECTED]:
Hi,
This is definitely a bug! If you could file a bug report
(https://gna.org/bugs/?func=additemgroup=relax), that would be much
appreciated. If you would like a description of how this is done,
please see section 3.3 of the relax
On Tue, Oct 7, 2008 at 7:48 PM, Tyler Reddy [EMAIL PROTECTED] wrote:
Hi Edward,
Thanks for your continued patience.
That's okay, it's not a problem.
Okay, it seems that aligning the data height column by the left most digit
rather than the right most digit is not tolerated. Now the script
access to this fixed code.
Regards,
Edward
On Tue, Oct 7, 2008 at 9:29 PM, Edward d'Auvergne
[EMAIL PROTECTED] wrote:
On Tue, Oct 7, 2008 at 7:48 PM, Tyler Reddy [EMAIL PROTECTED] wrote:
Hi Edward,
Thanks for your continued patience.
That's okay, it's not a problem.
Okay, it seems
On Wed, Oct 8, 2008 at 6:07 PM, Tyler Reddy [EMAIL PROTECTED] wrote:
To get past this requirement I added or subtracted the last digit for
each peak
height for the data set to make a pseudo-replicate data set (2 identical files
will still get a 0 value division problem). The program goes
On Wed, Oct 8, 2008 at 7:02 PM, Tyler Reddy [EMAIL PROTECTED] wrote:
Yes, the standard deviation of the steady-state NOEs match to 15 decimal
places
(ignoring the occasional rounding error in excel).
The svn command definitely worked, and picked up a bunch of files, but the
updated software
On Wed, Oct 15, 2008 at 3:53 PM, Tyler Reddy [EMAIL PROTECTED] wrote:
Hi,
I'll try to dig up those references. The other thing I find confusing is
that
some groups use the curve fit error for the parameters. So, the errors in R1
and R2 per residue are actually from the nonlinear curve
On Wed, Oct 15, 2008 at 4:56 PM, Tyler Reddy [EMAIL PROTECTED] wrote:
Hey,
Farrow et al. (1994) Biochemistry, 33: 5984-6003 also draw a similar
conclusion
(paragraph starting at bottom left of p. 5988) and apply the RMS value of
the
noise as an estimate of the standard deviation of peak
:59 AM, Chris MacRaild [EMAIL PROTECTED] wrote:
On Thu, Oct 16, 2008 at 8:07 PM, Edward d'Auvergne
[EMAIL PROTECTED] wrote:
On Thu, Oct 16, 2008 at 7:02 AM, Chris MacRaild [EMAIL PROTECTED] wrote:
On Thu, Oct 16, 2008 at 3:11 PM, Sébastien Morin
[EMAIL PROTECTED] wrote:
Hi,
I have a general
, the full_analysis.py
script needs checking).
Cheers,
Edward
On Thu, Oct 23, 2008 at 4:48 PM, Tyler Reddy [EMAIL PROTECTED] wrote:
The aic results file should be attached to the bug report. It looks like it's
there when I check it.
Quoting Edward d'Auvergne [EMAIL PROTECTED]:
Hi,
I've tried
, which is very weird. It took 10 rounds for the 'prolate' script to
converge:
RelaxWarning: The XH bond vector for residue ':[EMAIL PROTECTED]' is of zero
length.
Extracted H-H vectors for ':[EMAIL PROTECTED]'.
Quoting Edward d'Auvergne [EMAIL PROTECTED]:
Ok, one bug is because
text file and
display the output in the terminal at the same time as well (maybe I'm
getting
too ambitious there..)?
Also, I do get the same output for 'ellipsoid' as well, as Seb asked.
Yours,
Tyler
Quoting Edward d'Auvergne [EMAIL PROTECTED]:
Hi,
This issue looks like a problem
-packages/minfx/base_classes.py,
line 339, in backline
self.alpha, fc = backtrack(self.func, self.args, self.xk, self.fk,
self.dfk,
self.pk, a_init=self.a0)
TypeError: 'NoneType' object is not iterable
Quoting Edward d'Auvergne [EMAIL PROTECTED]:
:S It overwrites a pre-existing file
Cheers! That response pretty much covers it. I'm not sure if this is
exactly the error I fixed for you Tyler, but I think the repository
version doesn't have this problem. It would be useful to get the
repository version anyway as then the debugged version will be
instantly acessable by typing:
Hi,
Tyler, would you know what fixed the first traceback issue? I'd like
to try to fix that in relax as any traceback message in relax is
considered a bug. The only errors that don't count as bugs are the
RelaxError messages. This one seems like a directory issue within the
structure section
On Wed, Feb 11, 2009 at 8:45 PM, Pierre-Yves Savard
pierre-yves.sav...@bcm.ulaval.ca wrote:
Hi Edward,
Thank you again for your reply.
Here are some clarifications:
1. I have attached the script I am using (full_analysis-sphere.py).
Cheers.
2. In fact, SEQ_ARGS[6] is set to an integer
Hi,
Sorry for not getting back to this message earlier, I've had a few
deadlines lately. Please see below for more.
On Wed, Feb 4, 2009 at 9:16 PM, Sébastien Morin
sebastien.mori...@ulaval.ca wrote:
Hi Ed,
I tried what you proposed...
from
Hi,
This depends on which format you would like to use. There is one
script, sample_scripts/latex_mf_table.py, that will generate a LaTeX
table from your model-free data. If this is not what you need, then
the output text file could possibly also be imported into Excel as a
field delimited file
On Mon, Mar 9, 2009 at 6:58 PM, Pierre-Yves Savard
pierre-yves.sav...@bcm.ulaval.ca wrote:
Hi,
I would like to know if the Rex values given in the xml result file of
relax 1.3 are expressed in s-1 or if it is the result of the following
formula: Rex/(2 * π * freq)**2?
The value is in
On Tue, Mar 10, 2009 at 6:23 PM, Sébastien Morin
sebastien.mori...@ulaval.ca wrote:
Hi Ed,
PY is next to me and we discussed this issue together.
This seems very strange since values of the AICc criterion (extracted
during model selection) are not equal for models with or without these
On Thu, Mar 12, 2009 at 6:05 PM, Sébastien Morin
sebastien.mori...@ulaval.ca wrote:
Hi,
In an attempt to find the problem causing this bug, I dug into the code
and found something which could be erroneous... This alone does not fix
the bug, but may be part of the fix (or not)...
In function
On Thu, Mar 12, 2009 at 7:04 PM, Sébastien Morin
sebastien.mori...@ulaval.ca wrote:
Edward d'Auvergne wrote:
On Thu, Mar 12, 2009 at 6:05 PM, Sébastien Morin
sebastien.mori...@ulaval.ca wrote:
Hi,
In an attempt to find the problem causing this bug, I dug into the code
and found something
Note, the typo is not in equations 8.197a-c on page 319, only in the
first equation of the rotation matrix elements.
Regards,
Edward
On Thu, Mar 12, 2009 at 8:23 PM, Edward d'Auvergne
edward.dauver...@gmail.com wrote:
On Thu, Mar 12, 2009 at 7:04 PM, Sébastien Morin
sebastien.mori
Hi,
You may have found a bug there. Model elimination is tested in the
test suite, but maybe you have some circumstances that trigger an
unusual bug. Would you be able to make a bug report? This would help
in tracking down what is happening. It can be done here:
Hi,
Welcome to the relax mailing lists. This is quite a peculiar error, I
haven't seen that one before. Would you be able to submit a bug
report for this problem? This can be done at
https://gna.org/bugs/?group=relax. Thanks. Also, if you create a
tiny data set which reproduces this error
Dear Fatiha,
Welcome to the relax mailing lists! This should be quite a simple
problem to solve, but a little more information is required to work
out what is happening. Are you using the sample script that comes
with relax? When you run the script, do you receive any errors or
warnings? My
Hi,
Thanks to the work of Sebastian Morin, the reading of nmrView peak
lists has been added. However peak lists from nmrDraw is not yet
supported. CCPN might be able to convert this to XEasy, Sparky, or
nmrView format. I will also be adding support for a generic formatted
file (where all data
On Mon, Jul 20, 2009 at 3:56 PM, Douglas
Kojetindouglas.koje...@gmail.com wrote:
Hi Edward,
I'll give it a try. It doesn't seem like it should be too hard. I planned
on calling the function intensity_nlinls() -- the peak list is from the
NMRPipe suite, but the peak list reading procedure
Copyright (C) 2001-2006 Edward d'Auvergne
Copyright (C) 2006-2009 the relax development team
This is free software which you are welcome to modify and redistribute
under the conditions of the
GNU General Public License (GPL). This program
Hi,
I'm looking into this problem now. Could it be that the Python or
numpy C header files (python-2.6-devel or numpy-devel) are not
installed? The distribution files for 64-bit GNU/Linux I made for
relax-1.3.4 were built using Python 2.6 with numpy, and this caused no
problems. It looks very
Hi,
Thank you for building these packages (or at least attempting for now
;). I'm still looking into the problem, but it's looking like the
Python header files are missing or are from an old version. Do you
know if this could be the issue, that the Python development packages
are out of date or
1 - 100 of 463 matches
Mail list logo