Acquired a Zetron 45B. Would like to use it, but Zetron wants almost
as much for the manuals than I paid for the 45B.
Does anyone have a used manual they'd like to sell ? Any sites on the
web that might help ?
Thanks,
Yahoo! Groups Links
* To visit your group on the web, go to:
look for a traffic controller box. I have used both ground mounted and
pole, just need to find the size you need and they also have locks on them.
John
- Original Message -
From: doug [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, September 21, 2004 8:40 PM
Kevin and all,
Thanks for the input on the VHF amplifier. I should have stated that I was
looking at VHF 2 mtr. amplifiers.
The system is up and running now with a TE Systems 1452RA since 1997
Duplexers are DB and are rated at 200 watts input.
We have a dual antenna setup as well -
Just picked up 2 from a Traffic systems control company..
marine / aircraft grade aluminum (looks like stainless steel)
and price here varied from $75 to $400 depending on condition and
size. They told me that they get about $300 at the scrap yard for
them as scrap.
They are great, but most
Just make sure someone with a police key doesn't come along and switch
your repeater to the flashing mode ;-)
Chuck
WB2EDV
- Original Message -
From: Maire Company [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, September 22, 2004 7:41 PM
Subject: Re:
What Kevin was getting at was you might have better sensitivity or be
able to use a simpler duplexer with a tube or tuned amplifier. The
power rating of the duplexer has little to do with the isolation it
provides. The wideband solid state amp, even when run at lower power
levels, still
My other repeater is a piece of MASTR-II
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
Yes I worked in Lynchburg on the development of MII. Here's the
scoop: The option I believe you have is station PSLM covered in LBI-
4691B. In the radio shelf there is normally a DA jumper from Vol-Hi
pin 3 to pin 17 of J932 called PSLM B. This is removed forwith
options 9552, 9553 and
Wanted Kenwood KTS-10 Cable Kit
for Kenwood Commercial Radios
Please email me off list
Bob [EMAIL PROTECTED]
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL
9 matches
Mail list logo