[Repeater-Builder] Pacific research ri300 controllers

Hey guys, Anyone ever run the pacific research ri300 controller? Any thoughts on it, good, bad? Thanks, Jed

[Repeater-Builder] SALES Motorola NFN6010 PL Filters for MX300/HT90-440 and other eqpt

We have lowered the rpice for the PL Filters to $2.00 ea + post wew have most tones in stock. go to www.mdmradio.com and look at the listing under nfn6010. Grab them while you can. quantities are not unlimited and we are limited to stock on hand Ted Bleiman K9MDM MDM  Radio    If its

[Repeater-Builder] Re: Pacific research ri300 controllers

I like them, but they are expensive. They used to make a RI-310 which replaced the factory control boards inside a Vertex VXR-5000 repeater entirely, the RI-310 controlled the receive and transmitter oscillators and power which meant you could do some really neat things with macros. The RI-300

Re: [Repeater-Builder] Astron P/S question

Clip the purple wire going to the crowbar. The crowbar in the Astron is one of the most messed up deals ever. Astron also makes and auto reset kit for the crowbar. Or better yet, go find a Mastr II 35 amp supply and be done with it. Paul,ZW On Tue, Dec 9, 2008 at 12:33 PM, n9wys [EMAIL

RE: [Repeater-Builder] Pacific research ri300 controllers

Jed, I am using the RI310 controller, which is designed to be a drop-in controller for the Vertex VXR-5000 repeater. It is very flexible and capable. Best of all, you can pose any questions about its use to the designer at the factory, and get sound advice directly from the source.

[Repeater-Builder] MSF-5000 PL encode deviation

Gang, New to MSF-5000's. Great piece of hardware. But more used to working with GE Mastr II's. Have an MSF-5000 repeater we're trying to get going on VHF. Have experimented with both the on-board controller stand alone as well as off board CAT. Several ee-pots to adjust in the software setting

Re: [Repeater-Builder] MSF-5000 PL encode deviation

Ralph Hogan wrote: Gang, New to MSF-5000's. Great piece of hardware. But more used to working with GE Mastr II's. Have an MSF-5000 repeater we're trying to get going on VHF. Have experimented with both the on-board controller stand alone as well as off board CAT. Several ee-pots to adjust in

Re: [Repeater-Builder] MSF-5000 PL encode deviation

I put up a 5000 about 6 months ago and it works well but you are correct in that the ctcss deviation is not adjustable separately. Mine runs around 900hz also with the total with voice set at 4.9khz. Nobody notices a hum though. wb5oxq - Original Message - From: wd8chl To:

[Repeater-Builder] Opinions on telewave duplexers

Hey guys, I am in the process of designing a rather large repeater system. Any thoughts on telewave duplexers? I've heard a lot of great things about them, but the only thing I have to compare it with is txrx. Thoughts? Thanks, Jed

[Repeater-Builder] Tait tb7100 verses tb8100

Hey guys, I have a project where a customer wants to go all tait. Here's the million dollar question, what repeater should we get? What holds up better, the TB7100 or TB8100? Can someone point out the differences? I'm a little new to the tait world. Thanks, Jed