for the help.
Craig
Rick
Go to the files section and there is a file there Andrew bulletin 37383C.pdf
that is the instruction sheet for connectors.
Craig
--- In Repeater-Builder@yahoogroups.com, Rick Szajkowski va3r...@... wrote:
Hello to the group ... I need to run some new 7/8 hard line and some 1/2 inch
Don't ya just love it. You ask for some technical advice and immediately the
Wanna be radio police assume you are doing something wrong!
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of W. H. Phinizy
Sent: Tuesday, March 10, 2009 12:31 PM
To:
hold up to the constant flexing.
I uploaded Outrigger.pdf to the files section so you can see what's
available.
Craig Kielhofer
KEC Communications.
--- In Repeater-Builder@yahoogroups.com, T.J. kc8...@... wrote:
...but will not allow dipole antennas only fiberglass collinear
antennas
I have 3 of them, One has HT-90 crystal controlled units inside. The other
2 are GP-300 and can be programmed. It is a bit of a hassle, as I do not
have whatever is the proper interface, so I took the units out and popped
them into gp300 cases and programmed them, then put them back into the
Huh? Since when is a GP300 not type accepted for GMRS? News to me, but I
have been wrong before. (once!)
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Milt
Sent: Thursday, December 18, 2008 2:12 PM
To:
I have to agree with Chris, this is a technical group; the legalities should
not be of concern here. (Unless maybe someone asks for info) I f you are in
car dealership, do you ask everyone that is buying a car if they have a
drivers license? Unless there is a specific reason then why does everyone
end, so I don't have to worry if the radio has UHF or N
connectors on them.
Craig Kielhofer
KEC Communications.
Brian
Actually it's something worn over the kilt when the wind is blowing.
Craig
--- In Repeater-Builder@yahoogroups.com, [EMAIL PROTECTED] wrote:
Hi All!
I'm sorry to say this but after all the stuff of the past few
days that
when I saw the post on:
How to remove Scotch Kote
Ed
It's refreshing to see someone use proper radioman terminology these
days. The term MORT is falling into oblivion these days.
Craig
--- In Repeater-Builder@yahoogroups.com, Com/Rad Inc [EMAIL PROTECTED]
wrote:
I share this crazy deal with y'all
Some Mort ...
Ed
Com/Rad Inc
longer than the Scotchkote which harderns.
Craig
--- In Repeater-Builder@yahoogroups.com, Paul Finch
[EMAIL PROTECTED] wrote:
Ron,
...
The second part of making a new DB folded dipole antenna last is
sealing every nook and cranny of the antenna with 3M Scotchkote. I
paint at least two coats
Can anyone clarify if a radio can be used to crossband from 2 meters to say
220 or 440 under these rules?
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Jim
Sent: Thursday, November 08, 2007 12:07 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re:
Thanks for the clarification! Craig
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Keith, KB7M
Sent: Thursday, November 08, 2007 1:00 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Part 97 question reference to Repeater
control
control
capabilities any normal repeater would have as discussed at length in this
thread, you can sit in your car and control the radio, but you CANNOT put
your mobile radio in crossband mode and walk away from it.
--
Keith McQueen
[EMAIL PROTECTED]
801-224-9460
On 11/8/07, Craig Clark
Hi, I don't get QST. Any details you can share here?
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Adam Vazquez Kb2Jpd
Sent: Wednesday, November 07, 2007 11:15 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Part 97 question
Did you add a quarter wave radial to the top section?
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of matushka_99
Sent: Tuesday, February 06, 2007 2:15 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] UHF to VHF fiberglass antenna
ng to tell someone else about it.
At present the group is non moderated, both for membership and
postings, HOWEVER if we start getting spam I will have to moderate.
Craig
KEC Communications
YAHOO! GROUPS LINKS
Visit your group "Repeater-Builder" on the w
For those in the US I suggest that you check out Tri-State
Electronics in the Chicago area.
Their URL is: http://www.tselectronic.com/index.html, you may call
them and ask for Mark. You can call them at 800-445-0896. They are
very knowledgable and have a noce selection of antennas.
Craig
Were they PL-259 connectors on the jumper. An 'N' connector is self-
grounding with the inside ring around the center pin. I don't see how
teflon tape on the threads would hurt due to the self grounding
feature unless he got the tape into the connector.
Craig
--- In Repeater-Builder
It's nice to know that my grammer is correct.
Sorry about that.
cjk
--- In Repeater-Builder@yahoogroups.com, [EMAIL PROTECTED] wrote:
Hint: Note the grammatically proper punctuation (DOT) at the end of
that
link.
Yahoo! Groups Links
To visit your group on the web, go to:
and buy all new cables, when the old ones worked with no
problem. The latest greatest is not always the best.
You can contact me offline if you want to hear more of my ramblings
about the design engineers and their wisdom
Craig
--- In Repeater-Builder@yahoogroups.com, skipp025 [EMAIL
21 matches
Mail list logo
