A screwdriver is your friend...
Try going to the repeater site leaving your tools at home. It only takes one
stubborn screw to drive you nuts. Fortunately, friends took pity on my
stupidity and brought my tools to the bottom of the hill. 10 seconds and the
proper tool and life was good.
Isolator Wanted
Single?
Dual?
Frequency [not just band]
Power ratings?
Connectors?
WalterH
--- In Repeater-Builder@yahoogroups.com, K5IN k...@... wrote:
Ok, one last try. I need a UHF isolator and thought I would ask here again.
Brian, K5IN
, 2010 12:41 PM
Subject: [Repeater-Builder] Re: UHF Isolator Wanted
How many do you needI have several to handle up to 300 watts in a triple
config with 300 watt dummy loads
.
bill
w4oo
.
--- In Repeater-Builder@yahoogroups.com, K5IN k...@... wrote:
Ok
Ok, one last try. I need a UHF isolator and thought I would ask here again.
Brian, K5IN
I am selling a GE Mastr II UHF repeater already set up for the Arcom RC210
controller. GE preamp installed and crystaled up for 441.950 with a ts64
board installed. 75 watt PA and it is ready to go. No, this is not a
repeater builder built repeater but otherwise is a good condition machine.
Good morning,
I am selling a Doug Hall RBI still in the original wrapping. Sorry, no
original box but all connectors, pieces and parts are there new and unused.
$330.00 shipped and payment via PayPal and/or postal money orders are
accepted.
Brian, K5IN 360 239 9757
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of K5IN
Sent: Saturday, July 17, 2010 4:00 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Kenwood TKR850 series receive sensitivity
Good afternoon,
I am curious as to the receive sensitivity on these units
Good morning,
Like the header says, UHF isolator needed for 440.500 any suggestions?
Thanks
Brian, k5in
Hi John,
Please e-mail me pricing at k...@comcast.net
73 de Brian
- Original Message -
From: ab6li
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, April 04, 2010 9:48 PM
Subject: [Repeater-Builder] For Sale: GE Mstr II UHF Repeaters Complete
Hello to the group.
Something from left field:
Does the nose have any pattern to it? My UHF seems to have site noise that is
possibly generated by a 2.4g digital spread spectrum controller. At first, it
seemed like it was regular but I found that a TV stationg jput this system in
at the same time I changed to a
Good evening,
Your e-mail brings up one question: used duplexers for 220 where?
Brian
- Original Message -
From: Oz-in-DFW
To: Repeater-Builder@yahoogroups.com
Sent: Friday, January 01, 2010 9:40 PM
Subject: Re: [Repeater-Builder] 220 repeater
Micor conversions
Micor converted to 220 works very very well. Exceptional receive and excellent
audio quality. I would recommend it in a heart beat.
Brian, K5IN
- Original Message -
From: Dan Blasberg
To: Repeater-Builder@yahoogroups.com
Sent: Friday, January 01, 2010 8:32 PM
Subject
...@comcast.net
or 360-561-3455
K5IN sent this message on behalf of KC7CKO
Mixer and Spare Parts / manual for
the Duplexer Tuned and Ready to Go on my pair :)
- Original Message -
From: K5IN k...@comcast.net
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, November 24, 2009 12:22 AM
Subject: [Repeater-Builder] FS, Phelps Dodge UHF Duplexer
I am
I am selling a Phelps Dodge 529-506, 6 can UHF duplexer.
Currently tuned for 441.950 transmit and 446.950 receive.
Good physical and electrical condition, reason for selling it is excess to
my needs.
$200.00 plus shipping.
Next stop Ebay...
73 and tnx for reading.
Brian, k5in Olympia
What's it worth: Model 526-509 6 can UHF duplexer tuned for 441.950 transmit
and 446.950 receive.
Brian, k5in
Please let me know which kind of UHF Mastr II this model is or anything else
I should know.
Model number EX65KEUA8A
Thanks, Brian K5IN
I listed Decibel products DB-4071 duplexers a couple of days ago for $150.00
shipped.
Brian, k...@comcast.net
- Original Message -
From: Marcus
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, October 25, 2009 5:30 PM
Subject: [Repeater-Builder] Tait UHF Standby Repeater
I have a DB-4071 UH
F duplexer for sale.
$150.00 shipped in the lower 48.
Brian, k5in Olympia, WA 360 239 9757
Kevin,
Any suggestions for a decent quality 220mhz amp for repeater duty?
Micor 20-25 watts drive or pull the PA and exciter in and 50-60 watts
output?
Thanks
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Kevin Custer
Perhaps Comet Super-222?
- Original Message -
From: sjotrollet
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, August 18, 2009 5:52 AM
Subject: [Repeater-Builder] Antenna Type?
As part of an estate we're assisting with, would anyone know the
type, mfr, freq band.
A friend of mine has what he says is a Link-Comm RLC2 controller with auto
patch in it.
If I remember right firmware 3.0 is installed. He asked me for it's value???
Brian, k5in
the tower is
located. East, is mountains so don't care too much either. I only really
need/want north-south coverage. Tower is 160ft Rohn selfsupporting up at about
the 140ft level. I will know soon how it performs.
Brian, k5in
- Original Message -
From: Laryn Lohman
Yes sir it does make sense.
I appreciate the information you shared here and look forward to my new
installation.
I hope yours goes well too!
Brian, k5in
- Original Message -
From: Laryn Lohman
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, July 26, 2009 11:46 AM
I want a suggestion for a solidly built rugged dual band vertical for a remote
base located on a mountain top.
Please let me know a model number. Gain isn't the issue only survivability.
Thanks, Brian, k5in
lost of gain, I'd suggest a single folded dipole
element for each band, mounted on a single mast. Check Telewave, Sinclair or
Comprod - all make them.
If you require a single feedline, they make a band splitter too.
Chuck
WB2EDV
- Original Message -
From: K5IN
Sounds like a temperature related issue. You might recheck the duplexers and
even knock on their housing while testing.
I am no expert but am only throwing out suggestions.
Brian
- Original Message -
From: Maire-Radios
To: Repeater-Builder@yahoogroups.com
Sent: Friday,
in any responses.
73 and tnx, Brian, k5in
The antenna described in this posting is the Comet Super222. Back fiberglass
commercial 220mhz antenna.
Brian
- Original Message -
From: neal Newman
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, June 02, 2009 5:17 AM
Subject: RE: [Repeater-Builder] Re: Looking for 220
Anybody have an idea of the noise to singal ratio for the GE Mastr II UHF
preamp?
I have heard they are quite noisy as compared with other preamps such as the
Advanced Research products.
Let me know. Brian, k5in
Brian, k5in
Good evening,
A couple of weeks ago someone listed several DB Products BSWR on the amateur
band.
Anybody remember what the VSWR is for DB 404 and DB 408?
Brian, k5in
Jeff,
I find this interesting, especially with regard to the db408.
Did you test the db408 with both db404's harnessed and working together?
Brian, k5in
- Original Message -
From: Jeff DePolo
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, March 22, 2009 1:17 PM
Hi,
Now that I have clearly demonstrated my ignorance about multi bay dipole
antennas: Which one to buy for the following system.
441.950 output, 2,700ft on a mountain with a 160ft tower. Antenna will live at
the 140ft level fed by 78th inch hardline.
I need coverage that will include
?
--- Jeff
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of k5in
Sent: Friday, March 27, 2009 9:39 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] What is this antenna???
Hi
To: Repeater-Builder@yahoogroups.com
Sent: Friday, March 27, 2009 7:09 PM
Subject: Re: [Repeater-Builder] What is this antenna???
Pictures would help.
Chuck
WB2EDV
- Original Message -
From: k5in
To: Repeater-Builder@yahoogroups.com
Sent: Friday, March 27, 2009 9
Hi Jeff,
I am told it was swept and the VSWR was 1.1 at 445.000.
Brian, k5in
- Original Message -
From: Jeff DePolo
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, March 25, 2009 8:41 AM
Subject: RE: [Repeater-Builder] Re: Decibel dipole array sweeps
I can measure
the tower.
Thanks, Brian, k5in
- Original Message -
From: Jeff DePolo
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, March 25, 2009 1:00 PM
Subject: RE: [Repeater-Builder] Re: Decibel dipole array sweeps
I wouldn't go much shorter, even if it was side-mounted
Jeff,
Well, for that matter anybody that wants to answer. How long is the mast
supposed to be on a DB413?
I have one with a mast that is 12ft in length. Does it really matter when it
is 140ft in the air, 40 inches off the side of a tower?
Brian, k5in
- Original Message -
From
.
Brian, k5in
- Original Message -
From: Kris Kirby
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, March 22, 2009 3:37 PM
Subject: RE: [Repeater-Builder] Decibel dipole array sweeps
On Sun, 22 Mar 2009 n...@no6b.com wrote:
Well, without a long explanation, I can't view
39 matches
Mail list logo
