[Repeater-Builder] GE Versatone Ceramic Chips

Hey folks, Looking for some ceramic Versatone chips for the GE PL boards. Need a 110.9 (or a way to build one from scratch, if possible). Thanks, Jared

[Repeater-Builder] GE 1000 Key

Anybody got any spare keys to fit a GE1000 lock on the tall cabinets? I've got several cabinets in the garage and no keys to fit them. Thanks, Jared

[Repeater-Builder] GE Mastr II VHF RX Wanted

Hey folks, Looking for some GE Mastr II receivers in the VHF high band. Don't need the whole mobile radio (to cut down on shipping costs). I just need the preselector, oscillator, IF, preamp (if available) and detector. I'm using them to build crossband repeaters out of UHF Mastr II mobiles

[Repeater-Builder] Re: MSF5000 EPROM Controller

--- In Repeater-Builder@yahoogroups.com, Mike Morris wa6i...@... wrote: At 02:47 PM 03/07/10, you wrote: Hey folks, Any idea what would make an MSF5000 CLB EPROM controller randomly reset (test lights coming on)? When it's not in self-check mode, it works fine, but roughly every 3 mins,

[Repeater-Builder] Re: GE Voter Lamps Don't Work

--- In Repeater-Builder@yahoogroups.com, Eric Lemmon wb6...@... wrote: Jared, What is the model number of the voter? 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of KE4ZDG Sent: Friday, March 05, 2010

[Repeater-Builder] MSF5000 EPROM Controller

Hey folks, Any idea what would make an MSF5000 CLB EPROM controller randomly reset (test lights coming on)? When it's not in self-check mode, it works fine, but roughly every 3 mins, it resets itself. Thanks, Jared

[Repeater-Builder] GE Voter Lamps Don't Work

Hey folks, I just got an old gray GE voter working with a half dozen Midlands. The system is voting ok, but none of the lamps work. I mean NONE of them work. The receiving, the voted and the fail lamps are all DEAD on all cards. I find it hard to believe that all have completely blown (but

[Repeater-Builder] Bend an ICOM a little further

Hey folks, I'm working on a GE Mastr II high band repeater. Someone gave me some crystals that were made up for 146.010 RX. I installed one in an EC ICOM and the best I can adjust for is 146.0064, which sounds really scratchy when I inject a 3k deviation signal on 146.010. When I tune the

[Repeater-Builder] UHF MSF5000 100W (C74CLB) programmed and tuned

1 UHF MSF5000 EPROM programmable (CLB model) in a short 30 single-sided cabinet, 100W, DC backup connections, and duplexer. Comes programmed and tuned to your frequency PL - $500. Will throw in a N0XAS ID-o-matic (to make it legal for amateur use without a full fledged expensive