there is a power supply that Motorola made for the Micor that will charge
the battery (12V) and them run the repeater when needed.
The last I knew a new one from Motorola was about $400. as I got one for a
job and still in stock. Also they may be got at a ham fest as I got a Micor
having real good luck with the Kenwood TKR-740 and TKR-840
John
- Original Message -
From: nj902 [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, April 25, 2005 11:09 PM
Subject: [Repeater-Builder] Re: Micor VHF HI Receiver Spec?
--- In
I even had them work on older units and repair and tune them with on
problems.
- Original Message -
From: Neil McKie [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, April 15, 2005 9:39 AM
Subject: Re: [Repeater-Builder] Specs. for TX RX duplexer.
Of course
we have used both the UHF and VHF models
form TX-RX and am very happy with them
- Original Message -
From:
Steven
Passmore
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, April 09, 2005 5:28
AM
Subject: Re: [Repeater-Builder] VHF
preamps
I
for many years (12) I had a 420 on the top on a 78 foot tower in Florida
the tower had 3 sets of guys cables on it.. it made it thought all the
storms we for here but no ice as Florida has none. Just lots of wind. The
worst all the lighting the tower had hit it in all the years it was up.
--- In Repeater-Builder@yahoogroups.com, Maire Company
[EMAIL PROTECTED] wrote:
had to reload the software into the computer.
now when I go to read the repeater on rx or tx I get the same error.
after it go thought read 1, 2, 3,and 4 when it gets to 5 it comes
up with a check sum error. any
fits an R-100 repeater?
I'm not sure yet, but I plan to put it on the ham band.
Joe
Maire Company [EMAIL PROTECTED] wrote:
is this a working repeater?
Yahoo! Groups Links
Yahoo! Groups Links
* To visit your group on the web, go to:
http
should be the 2135.
maybe there is something holding it back in the inside?
or changed like you say.
is this a working repeater?
- Original Message -
From: Joe [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, March 30, 2005 8:42 PM
Subject: Re:
2135
- Original Message -
From: Joe [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, March 30, 2005 8:33 PM
Subject: [Repeater-Builder] What key fits an R-100 repeater?
Anyone know what key# fits the R-100 repeater?
TIA
Joe, K1ike
Yahoo!
at one time Vertex had one but not sure if it still made.
don't see it in there price book anymore.
- Original Message -
From: David A. Robichaux [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, March 28, 2005 9:36 AM
Subject: [Repeater-Builder] Dual Band Handie
I know the UHF one's we use go 5 meg from tuned freg. I think the VHF
one's go 1 or 2 meg only.
John
- Original Message -
From: w9mwq [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, March 26, 2005 6:00 PM
Subject: [Repeater-Builder] Vocom VCC200 Information
Well we are here to learn and go from
there with our thoughts. I on every turn don't try to sale
something, but it seems Dean and his company make it a habit of it.
We all learn something even if it just putting a repeater on the air and getting
it to work. Lets do a little less selling,
I don't know if I would want to do
business with a company like yours, you may only work there, but you don't
give it a showing. Sorry. I even sent you some email direct to ask
you about the use of a tower of your's, but never an answer.
So I gave up with you guys. If I acted to my
I 2nd this thank you very much great job..
- Original Message -
From: Laryn Lohman [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, March 25, 2005 8:05 PM
Subject: [Repeater-Builder] Re: Member Deleted?
Kevin, just wanted to say that you are doing a good
what city and state are you in?
thanks John
- Original Message -
From: Karl Bullock [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com; [EMAIL PROTECTED]
Sent: Friday, March 18, 2005 7:01 PM
Subject: [Repeater-Builder] Outdoor Enclosure Needed
Our repeater group is in dire
what do you guys know about the installation
of radiating cable for a repeater in a building. I have a 5 story building
and sub basement. So it is like 6 stories. Thinking of putting the
repeater in the lower level and installing the cable up to the
roof.On the roof thinking a DB-408. (or
I know this is a little off for
here.
Does any know the max distance you can run
RG6 Quad from the dish to the box?
thanks John
Yahoo! Groups Links
To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an
ittle amp's that you can get for use over 100 feet.
John VE3AMZ
- Original Message -
From:
Maire Company
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, March 13, 2005 5:14
PM
Subject: [Repeater-Builder] info
direct tv
I have some in Florida also and some Micors I would love to sell.
- Original Message -
From: Neil McKie [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, March 06, 2005 5:53 PM
Subject: Re: [Repeater-Builder] Micor cabinet
While it is a bit far to ship, I do
well if the unit can not be used as a repeater or it can that should be a
part of repeaters also.
we got a number of Micors still in operation (6) , and as long as we have
them out there working this would be a good think to know. We have been
changing them to Kenwood TKR-840 but still have
well the best one I like is the Kenwood TKR-840 as we use them for a number
of UHF sites.
the mate is the TKR-740 VHF
thanks John
- Original Message -
From: mbloom0947 [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, February 21, 2005 2:00 PM
Subject:
If you don't need a lot of power look at the Kenwood TKR-740we use a lot
of the tkr840 and love them.
John
- Original Message -
From: Denny [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, February 19, 2005 11:26 AM
Subject: [Repeater-Builder] Re: Building a
does someone a Motorola Voting Controller?
I have one available if needed.
thanks John
- Original Message -
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, February 15, 2005 2:59 PM
Subject: Re: [Repeater-Builder] Motorola Voting Controller???
looks
does any have a TX controller board they
would like to sell out of a Motorola Repeater R-100 DPL version?
thanks John
[EMAIL PROTECTED]
Yahoo! Groups Links
To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group,
if Kim does not get the repeater please let me know.
thanks John
[EMAIL PROTECTED]
- Original Message -
From: Kim Carr [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, February 07, 2005 5:49 PM
Subject: RE: [Repeater-Builder] Repeater, service monitors and other
At one time I had ICM make me some for Motorola HT-210 and HT-90. They
worked ok in Florida but when we took them to Gatlinburg TN in winter almost
all the radio's had problems of being off Freg. never ordered from them
again. Been using Bomar for many years for repeaters and HT-500 and
that I had made the mistake and
that they would be glad to make the crystals that I needed for 10
bucks each. SAY WHAT? SO BOMAR is on my nasty list. Great customer
no service!!
--- In Repeater-Builder@yahoogroups.com, Maire Company
[EMAIL PROTECTED] wrote:
At one time I had ICM make me some
so are here... http://www.batlabs.com/r100.html
Good luck hope this helps.
Brian, N4BWP
--- motarolla_doctor [EMAIL PROTECTED] wrote:
--- In Repeater-Builder@yahoogroups.com, Maire Company
[EMAIL PROTECTED] wrote:
had to reload the software into the computer.
now when I go to read
had to reload the software into the
computer.
now when I go to read the repeater on rx or
tx I get the same error.
after it go thought read 1, 2, 3,and 4
when it gets to 5 it comes up with a check sum error. any
thoughts help
thanks
Yahoo! Groups Links
To visit your
only think I can say I had one they make from 2 mobiles and sent it back.
the new one not to sure about it. We are a Maxon dealer but so far have
not tried one.
- Original Message -
From: Jeff Thomas [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, January 13,
Tessco also has them and they will do a good job. Have used them for years
and are very happy.
1-800-472-7373
- Original Message -
From: Chuck Kelsey [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, January 12, 2005 9:06 PM
Subject: Re: [Repeater-Builder]
it is done with a special power supply made for that use.
- Original Message -
From: Jim Cicirello [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, January 10, 2005 10:53 AM
Subject: [Repeater-Builder] Micor Base Station Battery Backup Circuit
Happy New Year
the last I read it is a FCC no no. you can not mix part 90 and 95 freg.
and if you do VHF and UHF part 90 there is a section in the part 90 that
give you the power and how to mix the two. also both freg also need to have
the same call sign.
- Original Message -
From: Ken Arck
Kenwood and Primus both make set up's for what you are asking but like I
said you and him both need to be on part 90 channels and both on the same
call sign set up as a system. I have done this in the past the other
problem is if the main channel is UHF then the VHF repeater can only be low
If you are near me in Florida I could help in the programming of the radio's
Or you can give Maxon / Midland a call and they can sell you a copy of the
program, I just got a new copy so I know it is still available.
John
- Original Message -
From: Gareth Bennett [EMAIL PROTECTED]
To:
PS I have a number of Micro repeater I would love to sell most are still
on the air.
If you could use one let me know thanks John
- Original Message -
From: Ed Folta [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, December 22, 2004 9:31 AM
Subject: Re:
Title: Message
To: Friend
Sent: Tuesday, December 21, 2004 6:04 PM
Subject: The 4 candles (this is nice)
I received this and loved it.
Merry
Christmas
and
Happy New Year
This is worth the wait
for it to load. Have a
just call Tessco and have them make you an RCA to N cable and be done with
it. one cable make and tested the way you need it.
we do it all the time and never any problems.
- Original Message -
From: Mathew Quaife [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday,
Tesco also
- Original Message -
From: russ [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, December 17, 2004 4:27 AM
Subject: Re: [Repeater-Builder] Source for custom made cables
I get mite from Cook Towers, Toll free 877-992-2665 e-mail
[EMAIL PROTECTED]
from them do the install for free.
- Original Message -
From: Maire Company [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, December 17, 2004 9:50 AM
Subject: Re: [Repeater-Builder] Source for custom made cables
Tesco also
- Original Message -
From
Title: Need AC mains monitor
we have a system we lease that can monitor
your power output and 2 other inputs and email you the info.
cost $18.50 per month and it covers the lease or the
equipment
John
- Original Message -
From:
Kevin Bednar
To:
does it have a 2 number display on the right? if so yes software if not
chip.
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: Repeater-Builder@yahoogroups.com
Sent: Sunday, November 14, 2004 6:15 PM
Subject: [Repeater-Builder] New VHF MSF-5000 Owner Questions
how about lower power , better hard line and a more gain DB antenna.
- Original Message -
From: kf0m [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, November 03, 2004 11:50 PM
Subject: RE: [Repeater-Builder] Solid State VHF PAs (200+ watts of power)
Here
I would think anyone in radio service would have a computer or two or four,
with a serial port. just to run about 80% of the programs we need one.
- Original Message -
From: Mike Mullarkey [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, October 28, 2004 9:48 AM
Tom,
a little help here? if I am
going to look at sat. A and sat. B with 2 dish's is there a way to
hook them into the same input on one receiver?
thanks John [EMAIL PROTECTED]
- Original Message -
From: TGundo 2003
To: Repeater-Builder@yahoogroups.com
Sent: Saturday,
What direction would I go to look for
one. any model you have the best luck with? thanks
- Original Message -
From:
Tony
King - W4ZT
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, October 23, 2004 10:14
PM
Subject: Re: Fw: [Repeater-Builder]
Direct
it should be a Kenwood TKR-850that is there repeater number
we use a number of the TKR-840 and been very happy with them
also look at the Vertex VXR-7000 UHFhave a number of them with out any
problems.We are both a Kenwood and Vertex dealer.
thanks John
- Original
yes you can do muli users on them.
- Original Message -
From: Vincent Caruso [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, October 12, 2004 9:02 PM
Subject: [Repeater-Builder] VXR7000 Repeater Question
Dose anyone know if the VXR7000 is capable of multiple
the best I can do is say we use the TX RX on
both UHF and VHF repeaters and am very happy with them. also have a UHF
combiner by them also and very happy with it also. thanks
- Original Message -
From:
Mike
DeWaele
To: Repeater-Builder@yahoogroups.com
Sent:
I would say look into Zetron
model 38 or high end 48
John
- Original Message -
From:
DIGITEL
S.A.
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, September 28, 2004 9:39
PM
Subject: Re: [Repeater-Builder] nice 3
tones courtesy beep(repeater
just remember anything over 200' to the tip you need to light and /or paint.
- Original Message -
From: sheryl titus [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, September 27, 2004 11:27 AM
Subject: Re: [Repeater-Builder] Tower Grounding
Thanks Eric I am on my
look for a traffic controller box. I have used both ground mounted and
pole, just need to find the size you need and they also have locks on them.
John
- Original Message -
From: doug [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, September 21, 2004 8:40 PM
Is 330 watts something that you can still a
license for ? Thought 150 watts max. Was it govt.?
any more info would be great.
How high was it on the tower?
thanks John
- Original Message -
From:
Tom Parker
To: Repeater-Builder@yahoogroups.com
Sent: Saturday,
Just got a factory news release on the TKR-720 and TKR-820 as of October
they will go away. Last production run.
- Original Message -
From: Eric Lemmon [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, September 18, 2004 6:43 PM
Subject: Re: [Repeater-Builder]
have done it in the past with no
problems.
- Original Message -
From:
Adam C. Feuer
To: repeater-builder@yahoogroups.com
Sent: Thursday, September 16, 2004 10:02
PM
Subject: [Repeater-Builder] VibraSponder
Question
Hello All,
Is it ok to replace a
does any one know of any low band repeaters
on the air?
(30 to 40 mhz)
if so how good do they work?
any ham repeaters?
if so how far does the tx and rx freg need
to be?
looking to built one and any help would help
thanks John
Yahoo! Groups Links
To visit your group
I could use the info also as I would like to
try it on a TKR-840 (almost the same) thanks
John
- Original Message -
From:
XE2SI
To: Repeater-Builder@yahoogroups.com
Sent: Friday, September 17, 2004 1:50
PM
Subject: [Repeater-Builder] TKR-830
Kenwood
We are also a Kenwood dealer and had to have
some radio's for some of our customers that are doing some work with the current
weather problems in Florida. Well UPS some how lost the units.
Kenwood sent out a replacement order late Friday night for Saturday so the we
could get this done.
Well as a Kenwood when I got my contract with them it gave the area I can
sell in. If I am selling out of my area they can STOP selling to me. I
have seen that happen to people in the past. Also to sell Kenwood products
there is a bout a 32 page contract I had to fill out. They make a very
I think honey bake with brown sugar on it. (well done please)In the
other hand have a cell phone. just kidding.smile it has been a
long week in central Florida.
- Original Message -
From: Billy [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday,
we are switching our Micor repeaters to
Kenwood TKR-840 with power amps and for that I would say we are very
happy. thanks
- Original Message -
From:
Joel
Mele
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, September 08, 2004 4:25
AM
Subject:
anything like business above it?
- Original Message -
From: mch [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, September 04, 2004 5:42 PM
Subject: Re: [Repeater-Builder] info on freg. band
Hams are just below that - 1240-1300 MHz.
Joe M.
Maire Company
up to this point we have used all three and the most we have is Crescent
800-usa make.
John
- Original Message -
From: Jeff Otterson [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, August 26, 2004 5:38 PM
Subject: Re: [Repeater-Builder] Looking for amplifier
the 2135 key it is
- Original Message -
From: texaswpd103 [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, August 23, 2004 8:31 PM
Subject: [Repeater-Builder] R100 Repeater
I picked up a good used Mot R100 repeater that I received today. It
did not come with a
- Original Message -
From: Bob Pickering [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, August 16, 2004 7:06 PM
Subject: [GMRS] Report of Florida REACT Team activity
SITREP # 5 Hurricane Charley
DATE
8/16/04
TIME
1900hrs
SITUATION
Widespread catastrophic damage in
I have a number of them and we program them from the front panel. Just
answer the display questions. should be no problem.
- Original Message -
From: K2ATT [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, August 17, 2004 5:41 PM
Subject: Re: [Repeater-Builder]
I am trying to load some software so I
can do a remote program but every time I load it I get error 1306, and
thoughts? I am using windows 95.
the program I am told should work from 95 to
xp
thanks John
Yahoo! Groups Links
To visit your group on the web, go
I don't know always had good luck and great products from TX RX.
John
- Original Message -
From: Paul Finch [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, August 01, 2004 5:17 PM
Subject: RE: [Repeater-Builder] Wanted: UHF Duplexer
That was a sad sad day!!!
I still have a number of Motorola R-100,
Micor's and a new in box Vertex VXR-7000 (at cost)
thanks John ps also lots of Maxon and EF Johnson
mobiles
- Original Message -
From:
Mathew Quaife
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, July 11, 2004 9:27
send me your email address and info on your plains and I will send you some
info.
thanks John [EMAIL PROTECTED]
- Original Message -
From: bredalrv1 [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, June 07, 2004 5:29 PM
Subject: [Repeater-Builder] Re: Question on
Wednesday, May 12, 2004 7:08 PM
Subject: University Announces Endowed Scholarship to HonorFormer Student
Nick Berg
Drexel University Announces Endowed Scholarship to Honor Former Student
Nick Berg
Source: Business Wire
Publication date: 2004-05-12
Drexel has established an endowed
- Original Message -
From: [EMAIL PROTECTED]
To: WFHSG [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Tuesday, May 11, 2004 5:05 PM
Subject: [WFHSG] Nick Berg Memorial
Original Message
From: Terri Nethery [EMAIL PROTECTED]
Subject: [Tower-pro] Nick Berg Memorial
- Original Message -
From: Maire Company [EMAIL PROTECTED]
To: M. Bond [EMAIL PROTECTED]
Sent: Tuesday, May 11, 2004 6:02 PM
Subject: Fw: [WFHSG] Very Sad News-Nick Berg: From his father
Subject: [Tower-pro] Fw: Nick Berg: From his father
To: [EMAIL PROTECTED]
I just received
Just don't see Chuck from Tampa Florida unless you check every thing you
get 3 time before you pay for it. buyer beware..
- Original Message -
From: Jed Barton [EMAIL PROTECTED]
To: repeater-builder@yahoogroups.com
Sent: Friday, May 07, 2004 12:48 PM
Subject:
what version? 37 or 37 max?
- Original Message -
From: w1ksz [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, May 07, 2004 12:53 PM
Subject: [Repeater-Builder] WTD: ZETRON Model 37
Anyone have one they will part with or know where I can get one ?
Tnx, Dick,
in microvolts? If you do not have access to a
signal generator or service monitor you will not get far on your own,
having manuals is important for the radio service tech you consult with
on-site to evaluate this problem.
Maire Company wrote:
well if know the freg is right just there is very little
what freg?
- Original Message -
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, April 19, 2004 6:05 PM
Subject: [Repeater-Builder] WTB: KXN1052A MICOR UHF Transmit Channel Element
Wanted: One - KXN1052A MICOR Base Station/Repeater UHF Transmit Channel
well the R-100 is a repeater and when you use it as a control station it
just has a remote station on it. It's normal operation is a repeater,
there is also a switch on the control for repeater operation and no repeater
operation.
- Original Message -
From: Rich [EMAIL PROTECTED]
To:
I got a RC-210 and they were the best to work. I have done a little
testing on the unit but don't have it in full operation at this time. BUT
all the help Ken has given and understanding, I am sure he will be there to
help as needed. I had him build the controller, as I have been short on
time
Send it into TX RX they will tune it at a very reasonable cost and get it
back to you in a week or so.
- Original Message -
From: Eric Lemmon [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, March 14, 2004 3:40 PM
Subject: Re: [Repeater-Builder] TX-RX Duplexer
I got a TLE1683A 12 watt 450 to
470 and just tested and puts out 18 watts not sure what a 1680 as my book
does not have that number in it. Is it for a Micor
repeater/base?
- Original Message -
From:
Dudley
To: [EMAIL PROTECTED] ; Repeater-Builder@yahoogroups.com
We have used Vocom amplifiers for may years (UHF) and have been very happy
with them. Get a RMA number and send the unit in. In a very short time you
with get it tuned, any repairs needed, and a cost that will not kill you.
We just got a unit not to long ago on Ebay and had them go over it and
I would love to sell the VHF 110 watt one I have with TX RX duplexer.
Working unit on the air at this time. $4000.00thanks John
151. TX 158 RX
- Original Message -
From: ka9gix [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, January 20, 2004 1:00 AM
we have always Bomar with no problems
- Original Message -
From: Danny Allen [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, January 18, 2004 5:29 PM
Subject: Re: [Repeater-Builder] wanted
Where is the best place to purchase crystals for a micor repeater?
Title: Zetron M 35 Patch
try location 54
- Original Message -
From:
Steve Bosshard
To: [EMAIL PROTECTED] ; Repeater-Builder@yahoogroups.com
Sent: Thursday, January 15, 2004 9:06
AM
Subject: [Repeater-Builder] Zetron M 35
Patch
Anyone have an easy way
what kind of Micro parts do you
need?
- Original Message -
From:
Kevin Bednar
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, January 06, 2004 7:56
PM
Subject: RE: [[Repeater-Builder] Repeater
Help]
Thanks Jim. I already checked the local shops,
it would be not as costly if you had a
bigger spacing on the freg.
- Original Message -
From:
Jed Barton
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, December 07, 2003 3:24
PM
Subject: Re: [Repeater-Builder] question
about combiners
Hey there.
I have a number of the VXR-7000 UHF repeater on the air for community
repeaters for a number of years with NO problems. They are on towers with a
master receive and rx ant setup. We are a Vertex dealer and I can say for a
50 watt unit we have had not problems. The other repeater we have out
Sounds right to me as at one time we had some of them. Been in the security
since 1970 and you could not even give them to me .
John
- Original Message -
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, November 25, 2003 12:52 PM
Subject: [Repeater-Builder]
We are a Kenwood dealer and I just check there service pages and can find
info on any change to the TKR 750 and 850 for power only squelch control
changes.
- Original Message -
From: Richard D. Reese [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, November 01,
90 matches
Mail list logo