Whats your motive in even replying AAron?
Wesley AB8KD
- Original Message -
From: AARON LEWIS DINKIN
To: Repeater-Builder@yahoogroups.com
Cc: a737dri...@consolidated.net ; candyman194...@yahoo.com ;
juanita_lu...@yahoo.com ; k5...@yahoo.com ; kd5...@classicnet.net ;
Correction CRX-3 Not many made
- Original Message -
From: wesleybazell
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, August 21, 2010 2:03 PM
Subject: [Repeater-Builder] Hallicrafter Radios
Hello,
Am looking for a Service Manual for an CRX-1.Have collected
The FCC is asking for feedback on this proposal.
Possibilty exists that Repeaters may be done away with.also no License
Although am not into GMRS(Have an Amateur Repeater.
Wesley AB8KD
- Original Message -
From: Don Kupferschmidt
To: Repeater-Builder@yahoogroups.com
Sent:
I get the same Msg of Shutting Down, but after 3 Months that has not been done.
Lots of X rates Spam comes thru. i just delete it. Very diificult to get
removed from this group. If you know a way,
let me know as I do not need this group.
Wesley AB8KD
- Original Message -
From: Don
John,
Do you have any time to repair Radios? When I worked for a Motorola Shop. sure
didn't have time to play.
Wesley AB8KD
- Original Message -
From: La Rue Communications
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, May 12, 2010 3:00 PM
Subject: Re:
before someone runs over their MaxTrac with a
plow or drops their portable into a big puddle. :-)
John Hymes
La Rue Communications
10 S. Aurora Street
Stockton, CA 95202
http://tinyurl.com/2dtngmn
- Original Message -
From: Wesley Bazell
To: Repeater-Builder
Hey Jeff,
Give me a Call on my repeater 443.2375 whrn you get to I71 Rt 68 in Ohio
Wesley
What time do you think you will be coming this way. oh. almost forgot. Tone
82.5hz. Was carrier Sqelch, but began to get interference.
Wesley AB8KD
- Original Message -
From: Jeff DePolo
Thanks Jeff,
Will you be there?What booth?
- Original Message -
From: Jeff DePolo
To: Repeater-Builder@yahoogroups.com
Sent: Friday, May 07, 2010 1:36 PM
Subject: RE: [Repeater-Builder] Skip At Dayton
Hi Skip,
What Booth are you going to be in at Dayton?,Will
Forget last Message. I see the e-mail where you will be
- Original Message -
From: Wesley Bazell
To: Repeater-Builder@yahoogroups.com
Sent: Friday, May 07, 2010 1:41 PM
Subject: Re: [Repeater-Builder] Skip At Dayton
Thanks Jeff,
Will you be there?What booth
Hi Ralph
In 1961 took the !st Class Phone. did not pass it first time,but did on the 2nd
try.It helped me to get 3 Great Jobs, also as an Chief Engineer Of an AM Radio
Station. It had Value then, I feel it still does to some extent,although being
76 years old retired. Will never use it again.
Hi Byron,
The Capacitors did the Trick. Thanks for the info
r.Wesley Bazell AB8KD
- Original Message -
From: byron
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, October 20, 2009 12:42 AM
Subject: [Repeater-Builder] RE: Wavetek 3000
Hi Wesley
I have had some
Hey Skip.I have a Maxtac in my Chevy Pickup on 52.525mhz. Worked on a lot of
tese units when I worked for an MSS, also Motrans.
Wesley AB8KD
- Original Message -
From: skipp025
To: Repeater-Builder@yahoogroups.com
Sent: Friday, March 05, 2010 6:32 PM
Subject:
Thanks Mike. good Idea. hope everything is going ok with you.
Wesley
- Original Message -
From: Mike WA6ILQ
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, October 22, 2009 3:36 AM
Subject: Re: [Repeater-Builder] extender board wanted TLN 5935A
Until you find one,
Thanks Ian for your input. Did sign up for the Website.
Wesley
- Original Message -
From: kerinvale
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, October 20, 2009 8:58 AM
Subject: Re: [Repeater-Builder] RE: Wavetek 3000
There is also a wavetek service monitor
, but the pages are good. Please
leave msg at kb5...@yahoo.com if you have interest.
--- In Repeater-Builder@yahoogroups.com, Wesley Bazell wesley...@...
wrote:
Good Question Joe
Wesley
- Original Message -
From: Joe k1ike_m...@...
To: Repeater-Builder
Thanks John for that Info. Will be headed into Town tomorrow get what you
recomend.
Wesley
- Original Message -
From: John Sehring
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, October 18, 2009 11:53 AM
Subject: [Repeater-Builder] Wavetek gone south
I've been
Ok Andy. Opened up Wavetek. The 3rd module from the right flashes on startup,
but goes out right away. Pulled the modules. Used an eraser to clean the
contacts then with a cleanerDeoxit on the bottom contacts. after pulling RF
module, where I think the problem lies. There were about 4 ICs, in
contact with the pins.
On Sun, Oct 18, 2009 at 1:46 PM, Wesley Bazell wesley...@verizon.net wrote:
Ok Andy. Opened up Wavetek. The 3rd module from the right flashes on startup,
but goes out right away. Pulled the modules. Used an eraser to clean the
contacts then with a cleanerDeoxit
Good Question Joe
Wesley
- Original Message -
From: Joe k1ike_m...@snet.net
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, October 18, 2009 5:56 PM
Subject: Re: [Repeater-Builder] Wavetek 3000
Instead of soldering the damaged IC to the board, I wonder if you could
buy headers
Thanks Charles. Will try that. Have been thinking all day about buying an
Motorola or IFR. Hope that works. TKS
73 Wesley
- Original Message -
From: Ham-Radio
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, October 17, 2009 10:59 PM
Subject: RE: [Repeater-Builder]
Works good for me. No problems hanging up, or Computer problems. Have been
using it for about 3 years now.
Wesley AB8KD
From: David Struebel wb2...@optonline.net
To: Repeater-Builder@yahoogroups.com
Sent: Sun, October 4, 2009 8:36:46 PM
Subject: Re:
No Picture. Just a bunch of Mumbo Jumble
- Original Message -
From: Herman Niedzielski k2...@myactv.net
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, September 02, 2009 2:33 PM
Subject: Re: [Repeater-Builder]
Eric Lemmon wrote:
Randy,
Rather than scan large schematics
Sorry about that
Did not mean to send it to you
- Original Message -
From: Wesley Bazell wesley...@verizon.net
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, September 02, 2009 2:37 PM
Subject: Re: [Repeater-Builder]
No Picture. Just a bunch of Mumbo Jumble
- Original
Hi
You didn, say Freq. I picked 146.94-146.34 punched in your figures and Got
94.4
Wesley AB8KD
- Original Message -
From: kj4si
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, August 22, 2009 9:54 AM
Subject: [Repeater-Builder] isolation
Hope someone may have
Hi Allan,
Would imagine this would also work on the DB212 Antenna. Could you give me a
little more info on the cables as i am a little sloe
Wesley AB8KD
- Original Message -
From: wa9zzu
To: Repeater-Builder@yahoogroups.com
Sent: Friday, August 21, 2009 3:11 PM
Subject:
Good for You kevin
- Original Message -
From: Kevin Custer
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, May 12, 2009 8:14 AM
Subject: Re: [Repeater-Builder] Why Are You Banning Users - END OF THREAD
Spencer R. Peterson wrote:
Why are you banning me from
--
From: Wesley Bazell wesley...@verizon.net
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, April 5, 2009 1:39:55 PM
Subject: Re: [Repeater-Builder] Re: Awfully quiet today
Thanks Anyway Nate. This is an Weslell 6100 Modem
- Original Message
Hi Nate
Have you any experiance on Echolink, opening Ports 5198,5199 with verizon.net?
Have not been sucessful in doing this. I realize this may be off Topic.
Wesley AB8KD
- Original Message -
From: Nate Duehr
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, April 05, 2009
Thanks Anyway Nate. This is an Weslell 6100 Modem
- Original Message -
From: Nate Duehr
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, April 05, 2009 2:31 PM
Subject: Re: [Repeater-Builder] Re: Awfully quiet today
On Apr 5, 2009, at 12:11 PM, Wesley Bazell wrote
--
From: Wesley Bazell wesley...@verizon.net
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, April 5, 2009 1:39:55 PM
Subject: Re: [Repeater-Builder] Re: Awfully quiet today
Thanks Anyway Nate. This is an Weslell 6100 Modem
Hi
A number of years ago, I installed Leaky Coax Cable in an Jail in Manatee Co in
Fla. 800 Trunking System. Portables could not make it out. I used one Repeater
which covered the Entire Jail.Sq Feet?
There is an Site you might get Info on AFL Telecommunications
Wesley AB8KD
- Original
Hi Mike,
Do you have an Pix of that Singer Generator? I worked for an Motorola MSS in
1964, I think this was the one we used. If so,
Would be intersted for old Memories.
Wesley AB8KD
- Original Message -
From: mike
To: Repeater-Builder@yahoogroups.com
Sent: Saturday,
Hi,
Probably your Server. had Problem With Juno, where I was getting 3 or 4 of the
same msg. Went to Verizon.net High Speed Internet. No Problem.
Wesley AB8KD
- Original Message -
From: ka1jfy
To: Repeater-Builder@yahoogroups.com
Sent: Monday, September 08, 2008 3:52 PM
Thank Goodness you are Back Skip. missed your little Gems over the Holiday
weekend. Hope you enjoyed the hAMFEST, wHEREVER THAT WAS.
Wesley AB8KD
- Original Message -
From: skipp025
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, September 03, 2008 11:09 AM
Subject:
Hi Michael.
Would Recommend Ron Wright N9EE in Tampa Who owns an 2 meter Repeater in
Tampa(very Knowligable.
Wesley AB8KD
- Original Message -
From: Michael Ryan
To: Repeater-Builder@yahoogroups.com
Sent: Friday, July 25, 2008 3:42 PM
Subject: [Repeater-Builder] Duplexer
Hi Laryn,
Sure agree with you on that. Hope everthing ok. Tks again on the excellant help
you have given me in the past.
Wesley AB8KD
- Original Message -
From: Laryn Lohman
To: Repeater-Builder@yahoogroups.com
Sent: Friday, July 11, 2008 12:21 AM
Subject:
Yep. I agree on that. Worked At motorola MSS for about 17 Years. Worked on the
MSR2000. MastrII is Superior. My 2 Cents. wesley AB8KD
- Original Message -
From: nj902
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, July 08, 2008 4:40 PM
Subject: [Repeater-Builder] Re: MSR
Yes Paul. Have the Schematic, and also the Link
Wesley
On Thu, 1 Jun 2006 08:20:34 -0700 DCFluX [EMAIL PROTECTED] writes:
Do you have a link to the schematic?
On 5/31/06, Richard W Bazell Jr [EMAIL PROTECTED] wrote:
Hi Paul
Glad to know this, as I was planning to build this Circuit.
Checked out the KG4LNE Link. Looks really professional. Let me know how
it works when you build it
Wesley AB8KD
On Thu, 01 Jun 2006 14:20:03 -0400 Ronny Julian [EMAIL PROTECTED]
writes:
KG4LNE has a great solution coming for those pesky eproms. Check out
the link below.
I have 3 radios
Thanks Pete
Mouser ha it in Stock. Appreciate your Response
Wesley AB8KD
On Wed, 31 May 2006 18:35:55 - n2mci [EMAIL PROTECTED] writes:
Westly, per http://www.findchips.com, all the major parts houses
carry this chip.. Depending upon how much stuff you need to order,
will dictate where
40 matches
Mail list logo