Does anyone have a preamplifier suitable for the 220MHz amateur band they care
to part with? My 220 project is nearing completion, and this is one of the
final parts I am in need of.
Please drop me an e-mail. Thank you!
Hi Group,
Looking to purchase a 220MHz repeater. Doesn't have to be anything elaborate or
high powered. An old Kendecom or something like that would do fine.
Don't want to pay through the nose for it either, but would like to get
something going in the next few months.
Anyone have any old
I've been using a Kenwood TKR-820 as a repeater on part of a linked UHF system
for a few years now. The repeater runs flawlessly, I've never had any trouble
with it.
I noticed when I initially built the radio that the external PTT on the
accessory connector works as it should, but that the
Hi Group,
I have two SCOM 5k repeater controllers that are surplus to my needs. I bought
one to use on a standalone repeater and then changed it out for an ACC, the
other was part of a package I bought from a friend.
Both of them are in factory rack mount cabinets. One of them has a display,
MotoTRBO systems (handhelds, mobiles, and repeaters) use color codes to
determine which radios are associated with which repeater. These Color Codes
are the equivalent of PL/DPL/NAC.
Chris
--- In Repeater-Builder@yahoogroups.com, Mark n9...@... wrote:
Joe,
I *think* this system works like
I was recently given a HAL ID-1000 identifier. It's a 1RU cabinet device with
connections and test jacks on the back.
Seems to be diode-matrix programmed. Wouldn't mind setting it up for my call
and maybe using it for something down the road.
Does anyone have a manual or any idea how it is
Recently bought a Daniels low band base station on eBay. A friend of mine and I
were able to get it working on the low end of 6 meters without any component
changes.
I'll report back on how that goes when it happens.
In the meantime, I am in search of the following parts for Daniels
, Feb 8, 2010 at 9:50 PM, surf_boy82 surf_bo...@... wrote:
Has anyone out there successfully set up any of the Daniels MT-3 series
lowband radios on 6 Meters?
Recently bought a unit and would like to get it working in the amateur
band. Any help would be appreciated.
Chris/KF6AJM
have never tried that myself,
so without being there to troubleshoot the system ... I am just
throwing darts at it.
Long live Quantar
James WJ1D
1 in service mixed mode!
surf_boy82 wrote:
The local club decided to drop the coin on a new repeater, so they bought a
used Quantar
The local club decided to drop the coin on a new repeater, so they bought a
used Quantar station. I'm working on interfacing an RLC-MOT to it.
I have the wildcard tables set up properly to allow what I would assume is
discriminator audio to be present on connector 14, pin 22 RX Wideband Audio.
Has anyone out there successfully set up any of the Daniels MT-3 series lowband
radios on 6 Meters?
Recently bought a unit and would like to get it working in the amateur band.
Any help would be appreciated.
Chris/KF6AJM
Does anyone have an owners manual for the IFR FM/AM 1500 that is surplus to
their needs? I've had one for quite a while and I'm familiar with most of it's
operation but wouldn't mind having the proper manuals for it. My unit has the
digital attenuator with LCD display on it.
Would prefer not
I have a UHF Motorola Radius R100 currently on 464/469MHz. It is the PL model.
Checked it out, works fine. I have NO use for it.
I'd like to trade it for any of the following:
ACC RC-850 Repeater Controller
ACC FC-900 ICOM Remote interface
ICOM UX series IC-900/901 band units (any band!)
Tried posting this to the ACC list but it's rather dead over there.
Hi Group,
The Doug Hall manual states the RC-96 now supports Generic mode, allowing
full control of a Kenwood mobile via the RBI-1. I have the RBI-1 wired up and a
440 radio on it, but I cannot control the radio from the RC-96
Recently bought an RC96 and an FC900 along with one ICOM module. Everything is
working great.
As I understand it the stock equipment doesn't support PL decode. The gent I
bought the FC900 and ICOM radio from said he installed an MX-COM (Ramsey) board
in the FC900 (and it's there) to do PL
Hi Group,
I have two S-Com 5 K controllers that are about to become surplus to my needs.
One of them is currently running on one of my repeaters, and the other is a
spare. Both are in EXCELLENT condition physically and work without issue. I
know one of them has the latest firmware in it, the
Group:
I have for sale 1 EFJohnson 242-3450-030 UHF LPI repeater, currently on 464MHz
TX, 469MHz RX with tone PL. It is in good condition and working properly. All
modules present (TX, RX, PA, Control, Power Supply and Duplexer).
I don't work with Johnson equipment and it is surplus to my
Hi Group,
Recently bought a CAT 1000B controller that includes the rack mount cabinet,
DVR, and RLS-1000B remote/link switch. Not 100% sure if I want to do this yet
or not, but I thought I'd put the feelers out and see if anyone would be
interested in the event I decide to go forward with it.
Group,
Trying to interface a Doug Hall RBI-1 to an RC-850 on either Link 1 or Link 2.
Anyone done this? Could anyone give me the basics of how to make this work on
either link port?
Essentially we have a 440 repeater, a 2 meter fixed frequency remote base and
the RBI-1.
We would like to be
Not sure if everyone here knows what I'm talking about, but I was
given a SpectraCom Netclock/2 time frequency standard at work, and I
need the WWVB Croquet Mallet antenna for it. This is an active
antenna designed to work with the Spectracom Netclock/2 product.
Those in commercial radio should
Anyone have an RLC-3 surplus to their needs for sale?
Any configuration... From 1 port to 8 ports.
Please e-mail me directly (surf_bo...@yahoo.com) with configuration
and asking price.
Thanks!
Chris
Hi Group,
Just checking in to see if anyone out there in repeater land has any
old Palomar Telecom equipment they are no longer using that they may
want to sell. I am looking for any old controllers, cards, voice
boards, back planes, card cages, ANYTHING Palomar Telecom. Even
un-built cards or
Hi Group! Long shot, but if there's anywhere to ask it's here...
Does anyone have any of the old Palomar Telecom DV-200 voice ID boards
laying around? These were a stand-alone voice board that did not
require the entire controller to operate.
I'm in need of one for parts to get another board
Hi Group,
The shop I work at was recently given a couple of decommissioned LTR
repeaters after the customer moved to a different radio format.
The stations are made by RF Technology Pty Ltd. out of Australia, and
consist of a 19 card cage containing a T500B Transmitter, R500B
Receiver and PA500B
in the ham band.
Mike K7PFJ
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of surf_boy82
Sent: Thursday, November 13, 2008 9:37 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Anyone have experience with RF
Technology
Hi Group,
By chance does anyone have a Doug Hall Electronics RBI-1 Kenwood Remote
Base Interface they'd care to part with? I'm looking for one in working
condition to set up a multiband remote, as I was recently given a very
nice Kenwood TM-x31 stack (TM-231, TM-331 and TM-431). I'm not
I'm trying to inject the PL into the Tone Input port of the
transmitter. It's a Communications Specialists TS-32.
Chris
KF6AJM
--- In Repeater-Builder@yahoogroups.com, Ken Arck [EMAIL PROTECTED] wrote:
At 10:29 PM 11/20/2004 -, you wrote:
Hi Group,
I'm working on a Yaesu FTR-2410
Hi Group,
I'm working on a Yaesu FTR-2410 2m repeater here. I have an SCOM
5K controller attached to it. Everything works fine except for PL
Encode. When I inject the tone into the transmitter at the Tone In
lead, the encoded PL tone distorts the repeat audio controller
telemetry (ID,
Question for the group with those familiar with MSF 5000 repeaters,
specifically the UHF ones with internal filtering:
The Duplexer Tee, the little silver block about 1 inch square that
connects between the receiver and transmitter filter output and gives
you your antenna connection is
29 matches
Mail list logo