of a dipole made for use at 222-225? Or
even modeled one?
Allan Crites WA9ZZU
--- In Repeater-Builder@yahoogroups.com, skipp025 skipp...@... wrote:
I'm looking for a DB224-JJ. They are becoming hard to
find, even from manufacturers. I would also consider
a Hustler HD6-5
-ED
Are these for FM or for ACSSB ?
AC
-- In Repeater-Builder@yahoogroups.com, Com/Rad Inc com-...@... wrote:
6 Sept 2009
Hello 220 enthusiasts
We have a quantity of 220 Mhz T/R modules from R F Technology Pty Ltd.,
which can be configured into
functional repeaters. These are
of the DB
420 antennas as well with good results.
73 Allan Crites WA9ZZU
-- In Repeater-Builder@yahoogroups.com, tahrens301 tahr...@... wrote:
Hi Jim, thanks for the words on corrosion, and Laryn... aah, the
voice of experience! No holes will be drilled!!
Thanks to all. I believe
will submit it.
AC
-- In Repeater-Builder@yahoogroups.com, Chuck Kelsey wb2...@... wrote:
How about an article with examples to post at the Repeater Builder site?
Chuck
WB2EDV
- Original Message -
From: wa9zzu wa9...@...
To: Repeater-Builder@yahoogroups.com
Sent: Friday, August
What was the spacing between the tower legs at the mounting location of the
dipoles in your model?
Allan Crites WA9ZZU
-- In Repeater-Builder@yahoogroups.com, n...@... wrote:
At 8/9/2009 05:47, you wrote:
As frequency decreases, so does the importance of keeping the dipoles
exactly
collection resembling a DB222
that would do 152-158 range ?
Ed
Com-Rad Inc
ED
- Original Message -
From: wa9zzu
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, August 01, 2009 9:11 AM
Subject: [Repeater-Builder] Re: DB224 Question
-I apologize
Al
Thanks for reply - I figured that to be the case
Do you have anything in your collection resembling a DB222
that would do 152-158 range ?
Ed
Com-Rad Inc
ED
- Original Message -
From: wa9zzu
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, August 01, 2009 9:11
-No
Al Crites
-- In Repeater-Builder@yahoogroups.com, Com/Rad Inc com-...@... wrote:
Turning to the experiences of the group as all vendor info sources are
off for the weekend - ( probably could research this on line )
Do any of you have knowledge of the chatachteristics of 1/2 of the DB
-I apologize for not giving a complete answer.
The short answer to the first question is yes.
The short answer to the second is no.
Al Crites
-- In Repeater-Builder@yahoogroups.com, wa9zzu wa9...@... wrote:
-No
Al Crites
-- In Repeater-Builder@yahoogroups.com, Com/Rad Inc com-rad@ wrote
The same analogy could be made for AM-FM-TV stations as well as Cellular,
Nextel, and other such similar private owners of the public radio spectrum who
get exclusive use granted.
Allan Crites WA9ZZU
--- In Repeater-Builder@yahoogroups.com, Dennis Zabawa kg4...@... wrote:
The point has
series connected to the cc of the one coax and to the cc of another 1/4
W.L. coax which connected to the output T. The cavity tuned the BP freq., and
the air variable tuned the notch.
73 WA9ZZU
--- On Sun, 6/28/09, Eric Lemmon wb6...@verizon.net wrote:
From: Eric Lemmon wb6...@verizon.net
would
be appreciated. Thank you.
The EIA 274 marking on the TO66 package indicates the item was mfg'd by
RCA. The device is an SCR. I suggest you try a 2n3525 which is now
mfg'd by GE and is cross referenced on their data sheet as 5A 500V.
73 Allan Crites WA9ZZU
is the date
code) and on the bottom are 4ZLRC on one line and below that is P6502
in the standard 8 pin DIP.
wa9zzu
--- In Repeater-Builder@yahoogroups.com, skipp025 [EMAIL PROTECTED]
wrote:
Re: Reverse Burst Comments (Com Spec RB-1)
If you add a circuit like the Com Spec RB-1 board to the typical
repeater system using a ts-32/ts-54 board... the tx ctcss is not
disabled or removed before the RB-1
--- In Repeater-Builder@yahoogroups.com, Tedd Doda [EMAIL PROTECTED]
wrote:
On Thu, 18 Jan 2007 05:52:15 -, wa9zzu wrote:
The IC's came from K9MDM's wharehouse liquidation sale last
November
and I have no idea where they were used. The parts are 8 pin DIP
with
the no. 61L23 marked
I need a commercial cross reference to a Mot. IC #61L23. Can anyone
help? Unknown the board number. Got no help from IC suppliers.
Thanks, wa9zzu.
WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of wa9zzu
Sent: Wednesday, January 17, 2007 10:04 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Mot. IC cross reference
I need a commercial cross reference
web http://www.mdmradio.com -
alt email [EMAIL PROTECTED]
or [EMAIL PROTECTED]
I have several. What do you have to trade ?
Allan Crites wa9zzu
__
__
Cheap talk?
Check out
web http://www.mdmradio.com -
alt email [EMAIL PROTECTED]
or [EMAIL PROTECTED]
I have several. What do you have to trade ?
Allan Crites wa9zzu
__
__
Cheap talk?
Check out
19 matches
Mail list logo
