Hi John,
I'm providing a disclaimer now...: I'm somewhat unorthodox,
unconventional, and have a terribly dry sense of humor. I've been known
to dispense what others feel is bad advice. With that in mind, feel
free to try any of my suggestions with great caution. I'm leaving
myself open for
Hi,
I have read the large majority of messages on here and the Repeater builders
site, and I am still lost.
This is the first time I have worked with a repeater in my 30 year ham career
and am learning something new everyday..
We installed a GE Mastr II running into pre-amp, a BandPass and
the sections screw together the symtom is crackly noise on all
signals. Probably won't see it on SWR meter.
Good Luck,
dave
- Original Message -
From: jmp46534
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, September 06, 2009 2:36 PM
Subject: [Repeater-Builder] De-sense
At 9/6/2009 11:36, you wrote:
Hi,
I have read the large majority of messages on here and the Repeater
builders site, and I am still lost.
This is the first time I have worked with a repeater in my 30 year ham
career and am learning something new everyday..
We installed a GE Mastr II running
-buil...@yahoogroups.com] On Behalf Of n...@no6b.com
Sent: Sunday, September 06, 2009 11:56 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] De-sense question
At 9/6/2009 11:36, you wrote:
Hi,
I have read the large majority of messages on here and the Repeater
builders
What kind of cables are used for jumpers?
Chuck
WB2EDV
- Original Message -
From: jmp46534 w...@arrl.net
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, September 06, 2009 2:36 PM
Subject: [Repeater-Builder] De-sense question
Hi,
I have read the large majority of messages
John,
Get the preamp out of the circuit and **powered down.** Preamps will
take any desense probelm and will make them worse - usually at twice
the value of their gain.
Do a 'binary search' - Start by getting it to work without stuff.
Disconnect the antenna and feedline and put a dummy load
7 matches
Mail list logo