va3rzs va3r...@... wrote:
Looking to put the 220 repeater on the controller
has any one done this ?
Thanks for any and all help
Rick
I've seen external repeater controller connections made on/to
Icom Repeaters in a number of different ways... and of course
it depends what the model number
Have a new in box Icom Fr-4000 repeater for sale.
$1145.00 also covers shipping to the 48 states. Florida sales must add sales
tax.
also a number of Micor repeaters for sale all UHF was used 460 to 470 band 12
to 75 watt units.
Some working units some for parts.
thanks John
1-888-708-0709
John,
How much for a part of of one of your scrap Micor. I'm looking for the metal
L shaped bracket that secoure the PL decoder board to the rear of the unified
chasis. Don't need the PL bd. , just the bracket and screws.
--
Doug
N3DAB/WPRX486/WPJL709
Maire-Radios [EMAIL
let me go look at one
thanks John
- Original Message -
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Cc: Maire-Radios
Sent: Thursday, November 13, 2008 10:09 AM
Subject: Re: [Repeater-Builder] Icom repeater
John,
How much for a part of of one
13, 2008 10:09 AM
Subject: Re: [Repeater-Builder] Icom repeater
John,
How much for a part of of one of your scrap Micor. I'm looking for the metal
L shaped bracket that secoure the PL decoder board to the rear of the unified
chasis. Don't need the PL bd. , just the bracket and screws
Subject: Icom repeater
I have 2 demo Icom FR-4000-3 repeaters for sale
Will program to your GMRS channels, tones and call sign.
$800.00 each and shippingFL address add sales tax.
thank you,
John
(727) 441-3250
Wise fellows of the repeater forum. After some advice from people
who know.
Over the years I've dabbled in programming commercial VHF radios,
mostly in relief aid settings where regulation is often scarce. I
know run a sports event company in the UK and I have a bundle of
VHF's on simplex
your setup is.
thanks John
- Original Message -
From: Paul Finch [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, June 15, 2007 2:21 PM
Subject: RE: [Repeater-Builder] ICOM Repeater
Only one problem, I am a Ham and an Icom dealer..
Paul
-Original
I have sent our FR-4000 back to ICOM twice to have the final amp replaced
even running reduced power and with extra cooling fans.
Kent W7AOR
www.narri.org http://www.narri.org/
[mailto:[EMAIL PROTECTED] On Behalf Of Nevada Amateur Radio
Repeaters, Inc.
Sent: Friday, June 15, 2007 10:48 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] ICOM Repeater
I have sent our FR-4000 back to ICOM twice to have the final amp replaced
even running reduced power
W1NMZ/6
- Original Message -
From: Paul Finch
To: Repeater-Builder@yahoogroups.com
Sent: 15 June, 2007 09:03
Subject: RE: [Repeater-Builder] ICOM Repeater
Wow, don't like hearing that! Just put one in commercial service for a
customer. Guess you did all the easy stuff like checking
Only one problem, I am a Ham and an Icom dealer..
Paul
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Dick
Sent: Friday, June 15, 2007 11:55 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] ICOM Repeater
Paul
*DEREK*
KD4ADL I would like to know how the install of the Icom
repeater went over this last weekend? I am getting close to buying
one of these for a uhf repeater here in Seattle. Icom America is only
15 miles away making any warranty situation a convenience. And anyone
else reading I need
Hi Guys:
A couple weeks ago, I asked whether anyone had a spare
internal harness for an IC-RP4020 UHF repeater. I found a
VHF unit and used it as parts.
After all the work of changing the wires around, I
find that the repeater has an output of only 3 watts.
I snapped the brick apart and found
I have never seen PLL chips go bad in anything. They should only do it
if the voltage regulators are fried and they are over volted. Check
your VCO transistor and buffers.
On 2/12/07, Glenn Little WB4UIV [EMAIL PROTECTED] wrote:
Replace the noisy PLL LO with a quiet crystal LO. Easy surgery,
Icom Repeater Interface Information
I'm trying to help someone interface an older icom 224 MHz
Repeater to an external controller. Can anyone provide the
connection information. This is the early version without
the rear panel din plug... although I do plan to connect a
1.283 Mhz newer din
Well...
I've got an Icom IC-RP2210 (220MHz) Repeater here with a dead
receiver. The PLL is crap and it's not the first time I've heard
about this problem. Even more no-fun is the NEC PLL and Prescaler
chips are no longer available.
Anyone ever find a replacement parts source for the pll
Anyone have any experience with the icom 50 watt compact repeater
that sun/pcs sells...thoughts/feelings?
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
Anyone have any experience with or thoughts/feelings about the Icom 50 watt compact uhf repeater?
Yahoo! Groups Links
To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:[EMAIL PROTECTED]
19 matches
Mail list logo
