[Repeater-Builder] Info Wanted: RE: Motorola Channel Elements parts

I recently ordered TX and RX crystals from ICM for the MICOR RT Station. I specified the correct FC and FX and catalog # 167380 for MOT KNX1018C TX (132-174). When these crystals were received they would not net on frequency. The TX was over 20Khz. high and would not net any closer. I

[Repeater-Builder] INFO Wanted

Other than to send the TX crystal back to ICM, is there any other way to move the frequency DOWN some 7.5KHZ.! The ICM cyrstal was ordered correctly (catalog#167380 for a MICOR TX FC: 146.91 FX:12242500). I have it installed in the 1019B channel element and have tried it in several other

RE: [Repeater-Builder] INFO Wanted

:[EMAIL PROTECTED] On Behalf Of w4dg.geo Sent: Thursday, April 03, 2008 6:45 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] INFO Wanted Other than to send the TX crystal back to ICM, is there any other way to move the frequency DOWN some 7.5KHZ.! The ICM cyrstal was ordered

Re: [Repeater-Builder] INFO Wanted

This is why it is always best to order a complete element, rather than to order just the crystal and install it in an element yourself. You will need to make trial and error changes in the capacitor values in your element until you can get it on freq. Make small incremental changes. Good luck, and

[Repeater-Builder] Info wanted on Mitrek VHF rptr.

73's to the Group The following info appears on a MITREK VHF Mobile repeater. This is a factory (Motorola) built product, NOT an after market modified mobile radio. Can anyone provide any information or documentation on this repeater ? Local searches thru Motorola shops have produced

Re: [Repeater-Builder] Info wanted on Mitrek VHF rptr.

From his description, I'd almost expect to find WHAC engraved on the case .. LOL!! trying AGT canada in Google got 629,000 hits... ummm ~ no thanks. Sounds like a challenge ! Good Luck. Eric Lemmon wrote: I looked up the your model number in my cross-reference manual, without finding a

RE: [Repeater-Builder] Info wanted on Mitrek VHF rptr.

for simple selection. Just a thought... 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of n3dab Sent: Saturday, March 25, 2006 8:46 AM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Info wanted on Mitrek

[Repeater-Builder] Info wanted: MVR16MS Exec II Mobile Extender

Just got a couple of MVR16MS Exec II Mobile Extenders. Anyone happen to have the documentation info?? Thanks! Ronny K4RJJ Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email