, 1/13/09, nj902 wb0...@... wrote:
From: nj902 wb0...@...
Subject: [Repeater-Builder] Re: Repeater controller to be used
with MSF5000
To: Repeater-Builder@yahoogroups.com
Date: Tuesday, January 13, 2009, 4:33 PM
--- In Repeater-Builder@yahoogroups.com, Bob M.
msf5kguru@
wrote
...@cox.net
Subject: [Repeater-Builder] Re: Repeater controller to be used with MSF5000
To: Repeater-Builder@yahoogroups.com
Date: Tuesday, January 13, 2009, 5:55 PM
Well, I'm cheap and lazy also. On the front of the
control panel is
a center off Access Disable switch, SW801 sp3t
(on-off
Motorola had two factory options that would allow control of the
MSF5000 station, the DTMF decoder and the SAM [Station Access
Module].
The SAM card can respond to DTMF, MDC, and other signaling formats
and is the most versatile. It was also referred to as the Smart
Wildcard. Unfortunately,
the repeater using a
portable or mobile radio with a DTMF mike.
Bob M.
==
--- On Tue, 1/13/09, nj902 wb0...@arrl.net wrote:
From: nj902 wb0...@arrl.net
Subject: [Repeater-Builder] Re: Repeater controller to be used with MSF5000
To: Repeater-Builder@yahoogroups.com
Date: Tuesday, January 13
--- In Repeater-Builder@yahoogroups.com, Bob M. msf5kg...@...
wrote:
I believe the Motorola DTMF decoder resides in an expansion
chassis. ... As you said, both are rare and none of the stations I
need to control have an expansion chassis.
... The other suggestions, while innovative, don't
: nj902 wb0...@arrl.net
Subject: [Repeater-Builder] Re: Repeater controller to be used with MSF5000
To: Repeater-Builder@yahoogroups.com
Date: Tuesday, January 13, 2009, 4:33 PM
--- In Repeater-Builder@yahoogroups.com, Bob M.
msf5kg...@...
wrote:
I believe the Motorola DTMF decoder resides
Not only am I cheap, I'm lazy. Building something takes time. I was mainly
interested in a product I could buy that just needed power, incoming
audio, and a set of dry contacts that could be stuck inside the MSF5000
cabinet and be ready to use in a matter of minutes.
I have that, but
@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Bob M.
Sent: Tuesday, January 13, 2009 10:47 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: Repeater controller to be used with
MSF5000
I believe the Motorola DTMF decoder resides in an expansion chassis
8 matches
Mail list logo
