Hi Kevin,
I am installing a Comm Spec SS-32 encoder in a Micorrepeater. I am using a logic output from an S-Com 5Kcontroller to key the ground connection to the encoderwhenever the RX COR is active. I need to do this tobe able to link into another system.My problem is when ever the encoder
Thanks for your thoughts Bob. I have managed to minimize the problem by
doing as you suggested - I put a .1 uF cap and a 27K resistor is series
with the tone output of the SS-32. The frequency still drifts when the
tone is keyed and unkeyed, but now only about 50-60 Hz. I think that this
is
I am installing a Comm Spec SS-32 encoder in a Micor
repeater. I am using a logic output from an S-Com 5K
controller to key the ground connection to the encoder
whenever the RX COR is active. I need to do this to
be able to link into another system.
My problem is when ever the encoder is keyed or
Kevin Berlen wrote:
I am installing a Comm Spec SS-32 encoder in a Micor
repeater. I am using a logic output from an S-Com 5K
controller to key the ground connection to the encoder
whenever the RX COR is active. I need to do this to
be able to link into another system.
My problem is when
4 matches
Mail list logo