On Sun, 23 May 2010, Tim - WD6AWP wrote:
I have a small amount white noise on the TX of a Micor repeater. It is
most noticeable in the hang time but it's not coming from the
controller. It's still there with the controller completely removed
and pressing PTT on the station control card.
Hi Tim,
Might the RX be hearing the TX?
Doug - GM7SVK
On 23/05/2010 04:10:37, Tim - WD6AWP (tisaw...@gmail.com) wrote:
I have a small amount white noise on the TX of a Micor repeater. It is
most noticeable in the hang time but
it's not coming from the controller. It's still there with the
...@gmail.com
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, May 23, 2010 12:10 AM
Subject: [Repeater-Builder] White Noise on Micor TX
I have a small amount white noise on the TX of a Micor repeater. It is most
noticeable in the hang time but it's not coming from the controller. It's
still
At 5/22/2010 21:10, you wrote:
I have a small amount white noise on the TX of a Micor repeater. It is
most noticeable in the hang time but it's not coming from the controller.
It's still there with the controller completely removed and pressing PTT
on the station control card. It's more
Yes, it has a stock Motorola PL encode board. I think the noise was there
before I installed it.
--
:wq
Tim
Has the noise been there all along?
It may be just the nature of the beast.
There is an article on the RB web site about modifying a mobile audio
squelch board to work in a base/repeater station, one of the benifits to
doing so is the better muting of audio from the receiver, this is
because
- Original Message -
From: Thomas Oliver tsoli...@tir.com
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, May 23, 2010 12:21 PM
Subject: Re: [Repeater-Builder] White Noise on Micor TX
Has the noise been there all along?
It may be just the nature of the beast.
There is an article on the RB
, May 23, 2010 9:55 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] White Noise on Micor TX
Tom,
I believe he said that with the controller disconnected, and using local
PTT, it still does it. That should take the receiver completely out of the
equation, leaving only
- Original Message -
From: Thomas Olivertsoli...@tir.com
To:Repeater-Builder@yahoogroups.com
Sent: Sunday, May 23, 2010 12:21 PM
Subject: Re: [Repeater-Builder] White Noise on Micor TX
Has the noise been there all along?
It may be just the nature of the beast.
There is an article
.
That's why I suggested trying to add some resistance across the mic high and
low at the exciter.
Chuck
- Original Message -
From: Thomas Oliver tsoli...@tir.com
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, May 23, 2010 2:49 PM
Subject: Re: [Repeater-Builder] White Noise on Micor TX
-Builder%40yahoogroups.com
Subject: Re: [Repeater-Builder] White Noise on Micor TX
Tom,
I believe he said that with the controller disconnected, and using local
PTT, it still does it. That should take the receiver completely out of the
equation, leaving only the exciter as the likely culprit
@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Larry Horlick
Sent: Sunday, May 23, 2010 1:35 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] White Noise on Micor TX
Would the same apply to an MSF2000 base station converted to a repeater?
lh
On Sun
Olivertsoli...@tir.com
To:Repeater-Builder@yahoogroups.com
Sent: Sunday, May 23, 2010 2:49 PM
Subject: Re: [Repeater-Builder] White Noise on Micor TX
Chuck, I did over look that part about being disconnected.
Is it present when you have a full quieting signal on the rx input?
He may
%40yahoogroups.com
[mailto:Repeater-Builder@yahoogroups.comRepeater-Builder%40yahoogroups.com]
On Behalf Of Larry Horlick
Sent: Sunday, May 23, 2010 1:35 PM
To: Repeater-Builder@yahoogroups.com Repeater-Builder%40yahoogroups.com
Subject: Re: [Repeater-Builder] White Noise on Micor TX
Would the same
I have a small amount white noise on the TX of a Micor repeater. It is most
noticeable in the hang time but it's not coming from the controller. It's still
there with the controller completely removed and pressing PTT on the station
control card. It's more noticeable on some radios, perhaps
15 matches
Mail list logo