Hello, Just bought an MSR2000. Got it working fine here at home, with a hb COR circuit. Took it to the site where there is a CAT500 controller. Hooked the CAT500 power to an A+ spot on the backplane. Power up and only the transmitter was working. Receiver seemed completely dead. The A+ had failed, but I do not know when it failed, before or after hooking up the CAT500.
The problem is that I have not been able to get the manuals for the repeater yet. So, if anyone has the schematic of the small power supply board that supplies the A+ and such, I would appreciate the pdf. I also do not have the pdf of the squelch gate card. The CAT500 says it draws a max of 80ma, which is not much. Thanks, Glen K4KV Colquitt County Ham Radio Society 146.19/79 600' AGL near Sumner, GA Moultrie, GA