and dislikes. Over
the years we have had a lot of repeaters and still do that use Zetron
controllers.
thanks John
- Original Message -
From: Bill Hudson
To: [EMAIL PROTECTED]
Sent: Thursday, April 12, 2007 11:55 PM
Subject: RE: [Repeater-Builder] Zetron 38 vs. 38a
Let
PROTECTED]
Sent: Thu, 12 Apr 2007 12:20 PM
Subject: [Repeater-Builder] Zetron 38 vs. 38a
Hello and thanks for having me on the group
Does anyone know/is there any difference between a Zetron Model 38 and
Model 38A, aside from the obvious descriptor change?
I can only find a manual on the Zetron website
Bill Hudson wrote:
Let me help you a little with this 38 vs. 38A thing.
snip
If you were talking to someone with a 38 on the repeater, and the other
station answers (keys up) during the hang delay, the repeater passes the
audio from the responding station, but drops out after the normal
Hello and thanks for having me on the group
Does anyone know/is there any difference between a Zetron Model 38 and
Model 38A, aside from the obvious descriptor change?
I can only find a manual on the Zetron website for the 38A and want to
know for sure before buying a 38 that it is the same/very
On 4/12/07, mthoeft [EMAIL PROTECTED] wrote:
Hello and thanks for having me on the group
Does anyone know/is there any difference between a Zetron Model 38 and
Model 38A, aside from the obvious descriptor change?
I can only find a manual on the Zetron website for the 38A and want to
know for
-
From: Nate Duehr
To: [EMAIL PROTECTED]
Sent: Thursday, April 12, 2007 7:34 PM
Subject: Re: [Repeater-Builder] Zetron 38 vs. 38a
On 4/12/07, mthoeft [EMAIL PROTECTED] wrote:
Hello and thanks for having me on the group
Does anyone know/is there any difference between a Zetron
PROTECTED]Nate Duehr
To: mailto:[EMAIL PROTECTED][EMAIL PROTECTED]
Sent: Thursday, April 12, 2007 7:34 PM
Subject: Re: [Repeater-Builder] Zetron 38 vs. 38a
On 4/12/07, mthoeft mailto:[EMAIL PROTECTED][EMAIL PROTECTED] wrote:
Hello and thanks for having me on the group
Does anyone know
I have a Model 37
Repeaterman, that I want to use to connect two Motorola GM300's to use
as a portable Amateur Radio repeater. I have the 37 manual, and can
figure it out, but with time being on the short side, I thought I would
ask if anyone else has the hook up info. There is a guy on EB*y that
I was handed a Zetron model 30 Worldpatch and Model 37 Repeaterman
a few weeks ago. Either or both may end up in a porta-peter, depends on
the functionality they have
I've tapped all the local sources and came up dry... I've called Zetrons
California rep on the phone and got nowhere (why would
,
Dick W1NMZ/6
- Original Message -
From: Mike Morris WA6ILQ [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: 24 February, 2007 21:43
Subject: [Repeater-Builder] Zetron Model 37 Repeaterman and Model 40
Worldpatch
Well, I was given an interesting box today to see if it can
Well, I was given an interesting box today to see if it can
be moved to an amateur channel...
It has a Spectrum receiver (on 469.0625 !) and a Hamtronics
TA451 transmitter (!) in it, along with a Zetron Model 37
Repeaterman (part number on the bottom is 901-9241) and
a Model 40 Worldpatch
I wondered if anyone has a schematic for the Zetron 38 controller.
I have found the manual on the repeaters build site but the schematics
are not visible.
Thanks
N3GH
George
-Builder@yahoogroups.com
Sent: Thu, 8 Feb 2007 1:49 PM
Subject: [Repeater-Builder] Zetron 38 controller
I wondered if anyone has a schematic for the Zetron 38 controller.
I have found the manual on the repeaters build site but the schematics
are not visible.
Thanks
N3GH
George
Hi All, I have been given the above unit but without a manual...Can
anyone help please?Cheers Dave UZN
Hi gang, I'd like to know if one of you would have
technical info on how to connect a zetron ZML/ZMX mike :
Here is an info link: http://www.intepla.com/zetron/english/specpdf/zmxspc.pdf
Thanks, VE3JGL Luc.
YAHOO! GROUPS LINKS
Visit your
hi does anybody have a manual for the zetron 37 thanks michael.
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is
hi does anybody have a manual for the zetron 37 or any details thanks
michael;
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of
i am tring to build a repeater with two maxon pm150s and a zetron 37
can anybody help me with the wiring on these thanks michael
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an
The Zetron Model 38A Tone Panel I am using for our local 2M repeater
ait is only used for ident tail functions I do not want the
repeater audio routed through it. Therefore I need to modify the panel
so audio still goes in for DTMF control purposes the panel can
generate confirmation tones for
Hi Les
Use the Audio interface as one would use for your
standard setup and if you could imagine place the
Zetron input and output audio in a parallel fashion
.In this way all dtmf etc would be used normally.
With you ussing it to control the tail you would have
the cos line connected.
I am sure
I would like to solicit opinions from the group in regard to Zetrons
Digital Delay Units. To make it simple and right to the chase,
The question is about using the digital delay in a Municipal
environment for the Public Works Dept in a Rural South Jersey
township, (approx. 50 sq, Miles). The goal
Hello all,
I am looking for a manual copy for the Zetron model 38 tone panel, Not
the 38A What is the difference between the regular 38 and the 38A?
Thanks
Cecil Lale
KF6ZOK
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
Cecil,
If you don't find what you want at:
http://www.repeater-builder.com/other-mfrs/zetron-model-38A025-9043Y.pdf
then contact Technical Support at www.zetron.com.
73, Eric Lemmon WB6FLY
Cecil Lale KF6ZOK wrote:
...What is the difference between the regular 38 and the 38A?...
For those interested parties and maybe someone in the not too distant
future that may need some help .
After determining how to get the ZETRON 38A out of transmit and eliminated
the constant carrier indication I still had serial coomunications issues.
We will address the issues one at a time.
Zetron 38A 702-9075 rev. P
I have built the serial interface cable for the second time and checked the pinout multiple times.
I am using MS's canned Hyperterm program.
I have tried both 1200 and 4800 baud 8 bit no parity 1 check bit
I only have the power connections at this time. No other
Hi Tim
1st make sure that the carrier light does not stay on
as if the SITE alarm is active for POWER UP it waits
for the carrier to go off before sending tones out.
This scenario produces a lock-up catch22 situation.
Best try Bitcom as all should be ok on that program.
Common problems with
I may have an extra. Is this the connector that wires connect to that plugs into the Zetron?
Russ
On 5/21/05, Tim Billingsley [EMAIL PROTECTED] wrote:
Is anyone aware of an alternate source for the 15 pin terminal strip onthe back of the Zetron 38A? I am guessing that this is probably a
The following is quote from the 38A manual.
what I would like to know (from users of the 38A) is there a way to
'extract' a configuration list from the controller in the same way you can
display all the configuration information from a TNC? or is it strictly
menu, prompt, and response as stated
Thanks to all that replied.
I appreciate your time and information.
73
Tim KD5CKP
Yahoo! Mail
Stay connected, organized, and protected. Take the tour:
http://tour.mail.yahoo.com/mailtour.html
Yahoo! Groups Links
* To visit your group on the web, go to:
Can anyone tell me where to find a manual for the Zetron 38A or at
least a PDF version if print copies aren't available? Photo copies
acceptable as well if all else fails.
Tim KD5CKP
Yahoo! Groups Links
* To visit your group on the web, go to:
I pickup a M39 repeater controller to build a ham repeater on 2M the
zetron people don't have manual. Anyone have one ?
rel60411
Bob
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send
Does anyone have any information on Zetron model 40 system patch
manual
Keith
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of
-Builder@yahoogroups.com
Sent: Thursday, April 28, 2005 5:50 PM
Subject: [Repeater-Builder] zetron model 39 manual
I pickup a M39 repeater controller to build a ham repeater on 2M the
zetron people don't have manual. Anyone have one ?
rel60411
Bob
Yahoo! Groups Links
Anybody out there have a pdf version of the user/service/programming
manual for this baby?
The software as well to program/configure it?
Lots to trade.
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe
yes hold the reset down after powering up the unit for 10 seconds it
will reset all to factory default
Yahoo! Groups Links
To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:[EMAIL PROTECTED]
Hello,
I picked up a Zetron 38 Max repeater controller at a hamfest and
the seller did not know the password. The default does not work. Is
there a hardware reset I can perform to reset to default values ? I am
accessing the controller via RS232
Thanks,
Bret
Yahoo!
-Builder] Zetron 38Max
Question
Hello, I picked up a Zetron
38 Max repeater controller at a hamfest andthe seller did not know the
password. The default does not work. Isthere a hardware reset I can
perform to reset to default values ? I amaccessing the controller via
RS232
Thanks
Hi All, I'm after a Zetron 38A contoller for a repeater project in
the UK..Anyone got one lurking please?
Cheers Dave G7UZN
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe
www.gb3dx.com
- Original Message -
From: dave_g7uzn [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, December 24, 2004 12:41 PM
Subject: [Repeater-Builder] Zetron 38A wanted in UK
Hi All, I'm after a Zetron 38A contoller for a repeater project in
the UK..Anyone
Acquired a Zetron 45B. Would like to use it, but Zetron wants almost
as much for the manuals than I paid for the 45B.
Does anyone have a used manual they'd like to sell ? Any sites on the
web that might help ?
Thanks,
Yahoo! Groups Links
* To visit your group on the web, go to:
Hi,
Thanks for the reply, I don't have problem programming the unit via
the panel or through a computer. But I need the ability to turn off/on a
user or
some other feature remotely via dtmf. I have two model 38's that work fine,
thought the dtmf codes would be the same for both. Seems that
, July 30, 2004 5:44 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Zetron 38A
Anyone have a clue how to program this controller. I picked up a
MSF500 repeater that has one. Have tried conectiing to the serial
port and it does not seem to talk. Zetron has offered to sell me
I have misplaced our Zetron 38 manual and cant remember for the life
of me how to program this thing. Dose anyone have a copy in .pdf they
could e-mail me? or a photocopy of an original would work too (I would
be willing to pay for copying postage)
All help is appreciated
Joe
Yahoo!
Anybody has the zetron 30 manual?
Need it to program it as a repeater
controller.
Thank's
Yahoo! Groups Links
To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:[EMAIL PROTECTED]
Your use of
Anyone have a used 45B manual they wan't to sell ? Or anyone know were I
can download from net ?
Please advise ...[EMAIL PROTECTED]
- Original Message -
From: Virden Clark Beckman [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, February 08, 2004 12:56 PM
Title: Zetron M 35 Patch
Anyone have an easy way to add an inline box that will automatically dial 9 through a pbx for an outside line on an interconnect, or specifically how to make a Zetron Model 35 do this? I am trying to avoid a user having to dial 9 for an outside line on an
Title: Zetron M 35 Patch
try location 54
- Original Message -
From:
Steve Bosshard
To: [EMAIL PROTECTED] ; Repeater-Builder@yahoogroups.com
Sent: Thursday, January 15, 2004 9:06
AM
Subject: [Repeater-Builder] Zetron M 35
Patch
Anyone have an easy way
Hi Steve
I do appologise that I have not gotten back to you-I
can not find it amoungst my files but my ex place of
work does have a copy so I will get it from them
perhaps tonight or tomorrow.
Regards
Bradley Glen ZS5WT
--- Steve S. Bosshard (NU5D) [EMAIL PROTECTED]
wrote:
Hi Glen, any luck
Hi Glen, any luck on the Model 35?
Steve
[EMAIL PROTECTED]
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to:
101 - 149 of 149 matches
Mail list logo