Thanks for the info! I will be lookin into this. 73 ----- Original Message ----- From: Repeater-Builder@yahoogroups.com <Repeater-Builder@yahoogroups.com> To: Repeater-Builder@yahoogroups.com <Repeater-Builder@yahoogroups.com> Sent: Fri Jan 30 08:12:28 2009 Subject: [possible spam] [Repeater-Builder] Re: Motorola Maxar mods for 6M? Vertex FTL-1011 and Kenwood TK-6110
Norm, I wrote a little prg./ utility to change the freq. data in the KPG59D programming software.. How it works is, you program a freq. in the 40.xxx-43.yyy mhz range.. Save the file, exit KPG59D and then run that file through my program KWLB2HAM prg. Start KPG59D again and read the file back in and you'll have 6M freq's in there.. It supports 10M's too.. It converts any freq. in the 30.xxx mhz range to 29.xxx mhz and 40.xxx - 43.yyy mhz to 50.xxx - 53.yyy mhz, leaving everything else alone.. The program only supports KPG59D software for the TK-6110 molibe and TK-190 HT.. With careful tuning, Skipp told me he has gotten the TK-6110-2 to be able to work both 10M & 6M at the same time. I don't know about the the TK-190-2 going to 6M, but I know of one TK-190-1 on 10M with very little effert.. Skipp told me there is a hacked version of KPG59D called KPG59X, but he discovered a bug and found KWLB2HAM with the latest KPG59D to work without any problems.. I hope to include support of the TK-690 someday.. KWLB2HAM.EXE can be downloaded at: http://home.roadrunner.com/~n2mci/exe/KWLB2HAM.EXE <http://home.roadrunner.com/~n2mci/exe/KWLB2HAM.EXE> KWLB2HAM was based off my conversion program KW900EZP which allows most KW 900mhz radios on to the Ham Band.. I also have one for one of the KW UHF rptr's that doesn't have a way to go below 450 Mhz.. -73, Pete N2MCI --- In Repeater-Builder@yahoogroups.com <mailto:Repeater-Builder%40yahoogroups.com> , "NORM KNAPP" <nkn...@...> wrote: > > Hi Skip > I work for a Kenwood shop. I have installed dozens of TK-6110's. I tried to get one to program into 6m, but the software wouldn't let me. How do you do it? > 73 de N5NPO >
