Thanks for the info!
I will be lookin into this.
73
- Original Message -
From: Repeater-Builder@yahoogroups.com Repeater-Builder@yahoogroups.com
To: Repeater-Builder@yahoogroups.com Repeater-Builder@yahoogroups.com
Sent: Fri Jan 30 08:12:28 2009
Subject: [possible spam]
Make sure the controller is set for the radios to be duplex. This is
the duplex select: group 4 switch 5 and group 5 switch 5. The
defaults are half-duplex on each port. Be sure to save this as your
power up default with the save configuration setup command.
This is discussed in section 3.1 of
n2mci n2...@... wrote:
Norm, I wrote a little prg./ utility to change the freq. data
in the KPG59D programming software.. How it works is, you program
a freq. in the 40.xxx-43.yyy mhz range.. Save the file, exit
KPG59D and then run that file through my program KWLB2HAM prg.
Start KPG59D
I need at least two KLN6209A Vibrasponder reeds for 141.3 Hz, and at least
two KLN6210A Vibrasender reeds for 82.5 Hz. I have other frequencies to
trade, one for one. These reeds are needed for a critical link radio
system, and part number substitutions are not acceptable. Please respond
Very interesting video about a microwave link
Woodpeckers, acorns and microwave antennas.
Click on link below for video
http://home.pacbell.net/dredmo1//acorns/bearcreek.htm
http://home.pacbell.net/dredmo1/acorns/bearcreek.htm
John, K4AG
Try this link if the other doesn't work for you
http://home.pacbell.net/dredmo1/acorns/acorns.wmv
Wow! That is what I call Path Fade
Bryon Jeffers KØBSJ
John wrote:
*Very interesting video about a microwave link
Woodpeckers, acorns and microwave antennas.
*Click on
Chris - you are not a licensed amateur radio operator.
You got your GMRS system less than a year ago.
You live in Newport County, where records show a significant amount of
information.
http://www.zabasearch.com/redirects/zaba_1198_blue_bgc.php?ReportType=8sea
Are they like Chestnuts...are they any good microwaved?
LW
--- In Repeater-Builder@yahoogroups.com, Bryon Jeffers KØBSJ
k0...@... wrote:
Try this link if the other doesn't work for you
http://home.pacbell.net/dredmo1/acorns/acorns.wmv
Wow! That is what I call Path Fade
Bryon
Folks,.I replied privately to Chris, and since I was the guy
who put ths info on here as a favour to Mike, WA6ILQ,
it seems to me that this should end now.
In hindsight, it probably should have been a private E mail to Mike...
(I had to laugh when I was described as a Unknown third party)
We need a good transmitter for our WB4YRJ club repeater. What is a
good radio for a 100 watt transmitter for the lower half of the 2
meter amateur band? We just got coordinated for 145.15.
Thanks, Mick, KB4UPI
Eric,
If you don't get any replies on the 6209's for 141.3, is there anyway
that you could use TLN8381A's? I ask because I have three of them that
I could send you for a total cost of nothing!
Adam N2ACF
Eric Lemmon wrote:
I need at least two KLN6209A Vibrasponder reeds for 141.3 Hz, and at
Adam,
I appreciate your offer, but the TLN8381A is packaged in a larger case than
the KLN6209A, and will not fit the holder. Thanks anyway.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Adam C.
Thats too Funny.. I fell off my Chair
wish I had a camera when we opened one up. it was full of Bats. Almost fell
off the Tower
Neal-ka2caf
--- On Sat, 1/31/09, Bryon Jeffers KØBSJ k0...@hamrepeater.com wrote:
From: Bryon Jeffers KØBSJ k0...@hamrepeater.com
Subject: Re:
At 03:21 PM 1/31/2009, you wrote:
We need a good transmitter for our WB4YRJ club repeater. What is a
good radio for a 100 watt transmitter for the lower half of the 2
meter amateur band? We just got coordinated for 145.15.
Hi Mick,
I have a question ... Do you guys plan to run a PL tone on that
Hello Group
We have a RC-100 Repeater Controller and seem to be having
a issue with the Remote Base Pitt. The repeater wont key the Link radio.
The Link radio recieves fine and keys the repeater and passes audio
but if you key the repeater it wont key the link radio. I can
switch to Crossband
--- In Repeater-Builder@yahoogroups.com, Randy k8kh...@... wrote:
Hello Group
We have a RC-100 Repeater Controller and seem to be having
a issue with the Remote Base Pitt. The repeater wont key the Link
radio.
The Link radio recieves fine and keys the repeater and passes audio
but if
Re: LMR-400 cable talk in Jan 09 QST Page 88, center column
Remember our/the many posts regarding IMD/PIM and problems
with LMR-400 and similar constructed coax lines? The
same conversation occurred on the yahoo rfamplifiers group
and it made QST Magazine's The World Above 50MHz in Jan 09.
Hi all
Looking for manuals for
2.4Ghz Lynx-Cp2 Western Muiltplex model 27000-B1
For our group up in Montana. Any help at all would be
great.
Ralph W7HSG
Jeff:
I've been fooling around with this all day long and it was up until about
half an hour ago before I finally realized what I was doing wrong...
The default prefix is *0 for the control operator sequence... For the life
of me, I kept clipping off the * in the sequence...
07 unlock
*2 etc to
19 matches
Mail list logo
