I have (or should I say had) an exellent 440 repeater running using an RKR1225.
Then one day not too long ago it quit running.
Cracking open the case, I found an extremely well built mouse nest sitting atop
the transceiver compartment (right beside my add-on NHRC controller).
Well it looks
Does anyone have a hex image of an S-Com 5K version 1.3 that they can
send to me ?
My 5K controller lost eprom bits a few years back, and I was able to
acquire a replacement eprom. But now the replacement eprom has lost
its mind too !
Any help would be appreciated.
BP
I've had a Zetron 45B kickin' around for a few years, and now I'd
like to use it ...
Problem is, like many others who live too far away from parts
sources, I have a tendancy to borrow parts from one gadget to build
another.
At one time or another, I borrowed U2 and U30 for a controller
I am currently running a 6 meter repeater using a Midland 70-055C
transceiver as a receiver.
Anyone familiar with this transceiver will know that the receiver
requires a LO signal (approx 62 mhz) from the main VCO. The main VCO
is located on the transmitter board (which is fairly large board
Probably a simple case of too many people trying to access the site
all at the same time ...
Give it a bit of time, then try again ...
Gee I wish I lived in Teds neighborhood ! Lot's of cool stuff up for
sale ...
Bob
--- In Repeater-Builder@yahoogroups.com, Kevin Berlen, K9HX
[EMAIL
Going through a box of old stuff, I've come across a 4 cavity mobile
duplexer similar in construction to a Sinclair MR-354 (4 cavity
UHF), marked with what looks like Motorola TFE6070A (not sure on the
7 - may be a 3).
Anyone one know what range this duplexer is designed to cover ?
Please
, Bob VE3INY
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
I have two repeaters, one running 144.67/145.27, the other running
448.8/443.8. I use a ham grade diplexer (Daiwa or MFJ or something)
to connect the output(s) of the 2 meter and 440 duplexer(s) to a
single feedline feeding a dual band Cushcraft colinear.
This set-up works great, and
Acquired a Zetron 45B. Would like to use it, but Zetron wants almost
as much for the manuals than I paid for the 45B.
Does anyone have a used manual they'd like to sell ? Any sites on the
web that might help ?
Thanks,
Yahoo! Groups Links
* To visit your group on the web, go to:
I'm looking for a 455 khz IF / Discriminator board for a Pye Westminster
repeater (duplex radiotelephone).
Or I'm looking for a source for metric ferrite tuning slugs.
Busted the slug in the discriminator transformer this morning ...
Any help would be appreciated.
Bob VE3INY
Yahoo
Not for this discussion board, but I had a demo from an Engineering firm
that specialized in anti-eavesdropping devices. They were able to pick up
radiation from my PC, and through some pretty cool DSP, they were able to
pick out video signals going to the monitor , and re-assemble same to
and running tomorrow. Don't seem to be getting
correct signals from People Finder thru to the repeater.
Best regards, Bob VE3INY
- Original Message -
From: Ve2ckn,Gervais [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, November 25, 2003 9:14 PM
Subject: Re: [Repeater
Do you need the sampler simply to feed into a service monitor for deviation
measurements etc ?
If so, just wrap a three or four turn loop of wire around the coax feeding
your dummy load, and connect to test leads.
Bob
- Original Message -
From: nj902 [EMAIL PROTECTED]
To:
13 matches
Mail list logo