Mike,
Pin plugs appear to be .080 in diameter and miniature banana plugs are .090
in diameter at the Pomona Electronics web site
http://www.pomonaelectronics.com/index.php?i=prodmain
http://www.pomonaelectronics.com/index.php?i=prodmaingetDetails=0parent=H
WARE getDetails=0parent=HWARE
I
I see that your IDer is a model 1300 and mine are model 700, however, I
received this reply from one of Racom's people that may be helpful with
reprogramming any of Racom's IDers:
Snip.
Good Afternoon Jim:
Thank you for the e-mail and your interests in Racom Products.
Generally
Just in case you can't find a Zetron 19, take a look at this simplex
repeater controller. I've seen a demonstration on this one and it seems to
work very well. It sells for about $90.
http://www.argentdata.com/products/repeater.html
https://www.argentdata.com/catalog/index.php?cPath=27
Bruce and Skipp and group,
This discussion made me look in the file cabinet and I found the entire
package (instruction manuals, schematics, etc.) for my Sinadder CML-1. The
manual is actually for the Linear-5 meter, with an inserted Addendum for the
CML-1. I also have a few advertisement
Try this link for SAE CONNECTORS, 12 gauge and various lengths.
http://www.solarseller.com/low_voltage_dc_pumps__lvm__teel__accessories__plu
gs_and_extensions.htm
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of
corner of Marine and Aviation Avenues
in the city of Redondo Beach, CA. For on-the-air directions talk in on W6TRW
repeater 145.320 - (PL 114.8)
Look for Grey Chevy 4X4 Pickup.
73, Jim, WA6VPL
talk in on W6TRW
repeater 145.320 - (PL 114.8)
Look for Grey Chevy 4X4 Pickup.
73, Jim, WA6VPL
Skipp,
I once fixed the same problem by soldering (on the back side of the board) a
1/8 Watt resistor of about 47K Ohms to provide an external pull up. Unless
there is something else wrong inside the chip this should work. I think I
just got lucky with a midnight fix.
Jim
_
Eric,
I think you are referring to the differences between northern and southern
California 440 coordination administered by SCRRBA and NARCC. The northern
coordinator is NARCC (Northern Amateur Relay Council of California -
http://www.narcc.org/). Northern CA is low output and southern CA
Is it possible to provide any more details in regard to the mod you made?
Thanks, Jim
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of n3dab
Sent: Monday, March 23, 2009 12:45 PM
To: Repeater-Builder@yahoogroups.com
Subject:
program (DOS, Win98 or XP, I don't
care) they would like to share? I have looked at a few Freeware
Dialers found on the Internet, but none have the ability to key an
external device via a serial port control/handshake signal.
Thanks, Jim
WA6VPL
The factory provided feed harness was lost for our Decibel Products DB-
230, 3 element Yagi, that is being refurbished for 6 meters. The
driven element on this antenna has a T-match as shown in the rough
photo/diagram on page 23 of Catalog No. 16.
Can anyone please describe how this particular
inches.
Anyone out there have this happen to them? I wonder if this is
something I can measure on the 145 and 440 antennas I have in the
back yard?
Jim
WA6VPL
Lompoc, CA
13 matches
Mail list logo