Thanks for all of the suggestions. However I think you
guys are missing the problem. Both repeaters work fine when
they are not linked together. As stand alone machines they
work fine and the audio sounds fine. Once I turn on the
secondary port on the NHRC-4/m2 is when the noise
Thanks for all of the suggestions. However I think you guys are missing
the problem. Both repeaters work fine when they are not linked together. As
stand alone machines they work fine and the audio sounds fine. Once I turn
on the secondary port on the NHRC-4/m2 is when the noise occurs. I'm
Mike DeWaele wrote:
Hi All,
I'm having a problem linking two mastr 2 radios together. I have one site
and want to full time have my 2 meter and 440 machines linked together.
I saw (and agree with) the grounding comments made by others. Ground
loops suck. Been there, done that.
Also
At 10/20/2008 07:21, you wrote:
Thanks for all of the suggestions. However I think you
guys are missing the problem. Both repeaters work fine when
they are not linked together. As stand alone machines they
work fine and the audio sounds fine. Once I turn on the
secondary port on
Do you have speakers hooked up to the M2's? If so, do you
hear hum when
there's receiver activity?
...but if you DON'T have speakers connected, have you terminated the
speaker outputs into 4 or 8 ohm power resistors? I've seen
Mastr II audio
PAs go bonkers when those outputs aren't
Hi All,
I'm having a problem linking two mastr 2 radios together. I have one site
and want to full time have my 2 meter and 440 machines linked together.
Equipment : (2) Astron R-35 power supplies (one for each machine)
(1) Duplexed GE mastr 2 mobile for 2 meter machine.
, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Mike DeWaele
Sent: Sunday, October 19, 2008 12:30 PM
To: Repeater-Builder
Subject: [Repeater-Builder] Ge mastr 2 link question
Hi All,
I'm having a problem linking two
the ground pin on one of the Astrons
and the problem goes away, it will be an important clue.
Good luck!
73,
Paul, AE4KR
- Original Message -
From: Mike DeWaele
To: Repeater-Builder
Sent: Sunday, October 19, 2008 1:30 PM
Subject: [Repeater-Builder] Ge mastr 2 link question
Hi All
, 2008 4:59 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Ge mastr 2 link question
Ditto the possible issue with the Astrons, but you may also have too many
common grounds.
If you have the grounds of the machines interconnected through (1) the
power supplies, (2
frequency is the hum?
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Mike DeWaele
Sent: Sunday, October 19, 2008 5:29 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Ge mastr 2 link question
a suggestion, good luck in finding the problem.
Don, KD9PT
- Original Message -
From: Mike DeWaele
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, October 19, 2008 7:28 PM
Subject: RE: [Repeater-Builder] Ge mastr 2 link question
Paul, Eric
Thanks for the response. I did
11 matches
Mail list logo