Greetings all,
I joined this group because since earning my license I've wanted to set up a
repeater. I think I'm getting close to that now. Let me tell you what I
have and what I think I need. I ask that all of you smart, experienced
repeater owners would help me along in my path. Please
connections is controversial.
Is the transmitter on that Midland capable of 100% duty cycle? Most mobiles are
not.
73,
Paul, AE4KR
- Original Message -
From: Eric Mynes
To: Repeater-Builder@yahoogroups.com
Sent: Friday, October 09, 2009 10:43 PM
Subject: [Repeater-Builder] Help
to my comments.
Chuck
WB2EDV
- Original Message -
From: Eric Mynes
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, October 10, 2009 12:43 AM
Subject: [Repeater-Builder] Help, please.
Greetings all,
I joined this group because since earning my license I've
I am not familiar with them, but look about half way down the page at
http://www.batlabs.com/gm300.html
Jason
- Original Message -
From: Kevin Natalia [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, August 05, 2004 5:29 PM
Subject: [Repeater-Builder] Help Please
Piece of cake here (sorry, dun it before :) )
Pin 2 - Mic Audio (Pre-emphasis)
Pin 3 - PTT (pull to ground to tx, works with link-comm_
Pin 5 - Flat TX Audio (no pre-emp)
Pin 7 - Ground
Pin 8 - CSQ or CSQandPL detect (CSQ and PL detect only works if
microphone H.U.B. input is grounded)
Pin 11 -
Hi All,
I have 2x GM-300 radios which I wish to use as a full duplex link at one of
our main repeater sites.
These radios are 8 ch ones, and I want to use the connector in the back of
the radio.
Could someone please advise of the correct way of wiring it up. Should
mention it will be going into
6 matches
Mail list logo
