Paul,
It use to state in Part 97 damaging a Ham Radio station was an FCC
violation. Think this went away with the 70s if it feels good then do
it attitude and all that freedom stuff or maybe because so much equip
comes from Japan.
I think we owe it to Ham Radio that we monitor Carl's
--- In Repeater-Builder@yahoogroups.com, Dan Hancock [EMAIL PROTECTED] wrote:
I saved this from previous posts a few years ago. This should help
anyone re-build or modify any of the DB folded dipole antennas that use
single dipole elements.
The attachments are a Word doc and a PDF that
@yahoogroups.com
Sent: Tuesday, June 03, 2008 7:33 PM
Subject: [Repeater-Builder] Re: Homebrew DB-408-Sort of...
--- In Repeater-Builder@yahoogroups.com, Dan Hancock [EMAIL PROTECTED]
wrote:
I saved this from previous posts a few years ago. This should help
anyone re-build or modify any
At 6/3/2008 08:09, you wrote:
I saved this from previous posts a few years ago. This should help anyone
re-build or modify any of the DB folded dipole antennas that use single
dipole elements.
The attachments are a Word doc and a PDF that should be added to the
site somewhere. (hint hint)
I once grabbed a *bad* DB420 from a local two-way dealer's bone yard.
The bottom of the main feed coax had been roached by lightning. But
the top half of the antenna was fine. The top half of a DB420 is
basically a DB408. It still works well to this day.
Laryn K8TVZ
--- In
--- In Repeater-Builder@yahoogroups.com, Chuck Kelsey [EMAIL PROTECTED]
wrote:
Good luck.
The harness uses a combination of 50 and 35-ohm cable. I've never seen
any
specifications on actual lengths, just some measurements that were
made by
Skip that would give you a ballpark length.
Hello
6 matches
Mail list logo
