, Alexandre alexandre.yoko...@oregonstate.edu
À : Rietveld list rietveld_l@ill.fr
Envoyé le : Jeu 15 Octobre 2009, 21 h 33 min 31 s
Objet : RE: Re : HT XRD calibration
Hi all,
I've never used one of these Anton Paar furnaces, but with some of my
instruments (externally heated, not Pt resistive foil heated
- Message d'origine
De : Payzant, E. Andrew payza...@ornl.gov
À : Mikko Heikkilä mikko.j.heikk...@helsinki.fi
Cc : Rietveld list rietveld_l@ill.fr
Envoyé le : Mer 14 Octobre 2009, 16 h 39 min 58 s
Objet : Re: HT XRD calibration
All,
The two calibration standard method was described
...@ornl.gov]
Sent: Thursday, October 15, 2009 6:27 AM
To: Rietveld list
Subject: Re: Re : HT XRD calibration
Patrick,
That is a good idea. Note that to actually get rid of the uncertainty you
need to be certain that the thermocouple is either reading the temperature
of the actual sample
AM
To: rietveld_l@ill.fr
Subject: HT XRD calibration
Dear All
We have an Anton Paar HTK16 furnace with a Pt strip. I am
hoping to calibrate it both thermally and mechanically (height shift)
using either alpha alumina or ceria so as to better identify HT
phases. Have any
: Rietveld list rietveld_l@ill.fr
Envoyé le : Mer 14 Octobre 2009, 16 h 39 min 58 s
Objet : Re: HT XRD calibration
All,
The two calibration standard method was described by Andy Drews (Ford Research
Lab) in Advances in X-ray Analysis (the proceedings of the Denver X-ray
Conference), vol. 44
Dear All
We have an Anton Paar HTK16 furnace with a Pt strip. I am
hoping to calibrate it both thermally and mechanically (height shift)
using either alpha alumina or ceria so as to better identify HT
phases. Have any of you experience of this, or better suggestions for
---o
-Original Message-
From: r.m.wil...@qmul.ac.uk [mailto:r.m.wil...@qmul.ac.uk]
Sent: Thursday, 8 October 2009 3:14 AM
To: rietveld_l@ill.fr
Subject: HT XRD calibration
Dear All
We have an Anton Paar HTK16 furnace with a Pt strip. I am
hoping
