On Friday, March 11, 2005, at 07:56 PM, Larry Langford wrote:
Larry,
Very true from an EMD standpoint. However, when the Louisville
Nashville
merged with/absorbed the Nashville, Chattanooga and St. Louis in 1957,
the
acquired B units all had steam generators (LN's did not) and were
I just received an ABA set of FP-7's from American Models. The B unit had
coupler pads on either end with predrilled holes for Kadee style couplers.
I mounted a pair of SHS short body couplers without problem. However, the A
units have talgo mounting and no pads. I don't see how a pad could be
Larry, American Models must have downgraded their AP-7's. I have two
from the very first run and they have pads set up for the #5 coupler
box, in fact Ron supplied them with the kits. The mounts are on both
ends and are part of the zamac frame.
Very interesting!!
Bob Werre
Larry
Subject: Re: [S-Scale Modeling] FP-7 Couplers
On Friday, March 11, 2005, at 06:26 PM, Larry Langford wrote:
I just received an ABA set of FP-7's from American Models. The B unit
had
coupler pads on either end with predrilled holes for Kadee style
couplers.
I mounted a pair of SHS short
-Scale@yahoogroups.com
Sent: Friday, March 11, 2005 6:26 PM
Subject: [S-Scale Modeling] FP-7 Couplers
I just received an ABA set of FP-7's from American Models. The B unit had
coupler pads on either end with predrilled holes for Kadee style couplers.
I mounted a pair of SHS short body couplers
You might want to look at the mounting bracket that Don Thompson uses on his
F3/7 units. Check out his part number 00588. They require a couple of screw
holes be drilled in the frame but they come with the short shank coupler
already mounted on them.
Bill O.
[Non-text portions of this
Langford [EMAIL PROTECTED]
Sent: Friday, March 11, 2005 9:35 PM
Subject: Re: [S-Scale Modeling] FP-7 Couplers
I checked my ancient (cast metal truck frames) FP7 and found short pads on
both ends of the floor casting that fit Kadee #5 couplers.
I suggest you email Ron at [EMAIL PROTECTED] and ask what
On Friday, March 11, 2005, at 06:26 PM, Larry Langford wrote:
I just received an ABA set of FP-7's from American Models. The B unit
had
coupler pads on either end with predrilled holes for Kadee style
couplers.
I mounted a pair of SHS short body couplers without problem. However,
- Original Message -
From: Larry Langford [EMAIL PROTECTED]
I just received an ABA set of FP-7's from American Models. The B unit had
coupler pads on either end with predrilled holes for Kadee style couplers.
I mounted a pair of SHS short body couplers without problem. However, the A